MODIFICATION BULLETIN NO. 1 Page 1 of 2 ISSUED ON: July 31, ’92
Model Micro Sorter for A7 / N440 Volt/Hz
Modified Article Parts Catalog
Reason for
Parts catalog correction
Modification
Please correct your parts catalog as follows:
Correction
P/N Description Q’ty Index No. Page
Incorrect 12041376 Microswitch 1 119 3
Correct 12042297 Microswitch 1 119 3
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 1 Page 2 of 2 ISSUED ON: July 31, ’92
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25
INFOTEC S101 220, 240/50 EUROPE A327-26
RICOH CS120 220, 240/50 EUROPE etc. A327-27
V/Hz DESTINATION CODE SERIAL NUMBER
MODIFICATION BULLETIN NO. 2 Page 1 of 2 ISSUED ON: September 15, ’92
Model CS120 (Micro Sorter for A7) Volt/Hz
Modified Article Parts catalog
Reason for
Parts catalog correction
Modification
Please correct your parts catalog as follows:
Parts Catalog
Incorrect P/N Correct P/N Description Q’ty
Index No. Page
12041376 12042297 Microswitch
2 → 2
119
109
3
5
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 2 Page 2 of 2 ISSUED ON: September 15, ’92
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25
INFOTEC S101 220, 240/50 EUROPE A327-26
RICOH CS120 220, 240/50 EUROPE etc. A327-27
V/Hz DESTINATION CODE SERIAL NUMBER
MODIFICATION BULLETIN NO. 3 PAGE 1 OF 2
ISSUED ON: December 31, ’93
Model Micro Sorter for A7/N440 Volt/Hz
Modified Article Main Board
Reason for
To standardization with other models
Modification
Date of
Modification
To standardize with other models, a transistor on the main board has been modifie d. Part number of the main board
is still the same.
Inter-
Old P/N New P/N Description Q’ty Used
14000072 Transistor - 2SC 372Y 1 → 0 O/ 106 7
A3275710 Transistor - KTC 3198 - Y 0 → 1 /O 106 7
change-
ability
Index No. Page
Parts Catalog
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 3 PAGE 2 OF 2
ISSUED ON: December 31, ’93
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25
INFOTEC S101 220, 240/50 EUROPE A327-26
RICOH CS120 220, 240/50 EUROPE etc. A327-27
V/Hz DESTINATION CODE SERIAL NUMBER
MODIFICATION BULLETIN NO. 4 PAGE 1 OF 2
ISSUED ON: February 15, ’94
Model Micro Sorter for A7/N440 Volt/Hz
Modified Article Sorter Bin - Top
Reason for
To meet TÜV standard
Modification
To meet TÜV standard, the sorter bin-tops have been change d.
Inter-
Old P/N New P/N Description Q’ty
A4903005 A3273005 Sorter Bin - Top (RICOH)
A4903006 A3273006 Sorter Bin - Top (NRG, Infotec)
A4903146 ------ Front Mylar Seal - Top Bin
A4903147 ------ Rear Mylar Seal - Top Bin
1 → 1
1 → 1
1 → 0
1 → 0
change-
ability
X/O 5
X/O 5
----- 32
----- 33
Date of
Modification
Parts Catalog
Index No. Page
3
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 4 PAGE 2 OF 2
ISSUED ON: February 15, ’94
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25 2802020001
INFOTEC S101 220, 240/50 EUROPE A327-26 3B00220001
RICOH CS120 220, 240/50 EUROPE etc. A327-27 A3122020001
V/Hz DESTINATION CODE SERIAL NUMBER
MODIFICATION BULLETIN NO. 5 PAGE 1 OF 3
ISSUED ON: May 31, ’95
Model Micro Sorter for A7 / N440 Volt/Hz
Modified Article Antistatic Brush
Reason for
To reduce static electricity on copies
Modification
Draw
No.
Old Parts
No.
A3272031 Antistatic Brush - Feed out
68022032 Antistatic Brush Angle
09654008W
New Parts
No.
A5572101 Antistatic Brush
08025235 Tapping Bind Screw - M4 x 6
Description Rank
Tapping Screw with Flat
Washer - M4 x 8
Q’ty Used
Old→New
1 → 0
1 → 0
2 → 0
0 → 1
0 → 2
Date of
Modification
Inter-
change-
ability
O/O as a set 3 5
O/O as a set 36 5
Parts needed for replacement by new part
Part No. Description No. Page
Serial
Number
Parts
Catalog
45
108 5
110 5
67692272 Antistatic Brush
68016211 Top Stay
A5572101 Antistatic Brush
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
1 → 0
1 → 0
0 → 1
O/O as a set 10 3
93
35 3
M. Iwasa, Manager
Technical Support Department
DETAILS OF MODIFICATION
MODIFICATION BULLETIN NO. 5 PAGE 2 OF 3
ISSUED ON: May 31, ’95
1. EXTERIOR (A490)
Antistatic
Brush
67692272
Top Stay : 68016211
New Stayle
Antistatic Brush
A5572101
2. TRANSPORT (A490)
Antistatic
Brush Angle
# 68022032
Antistatic Brush
- Feed out
# A3272031
New Stayle
Antistatic Brush
A5572101
MODIFICATION BULLETIN NO. 5 PAGE 3 OF 3
ISSUED ON: May 31, ’95
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25
INFOTEC S101 220, 240/50 EUROPE A327-26
RICOH CS120 220, 240/50 EUROPE etc. A327-27 A312501XXXX
V/Hz DESTINATION CODE SERIAL NUMBER
MODIFICATION BULLETIN NO. 6 PAGE 1 OF 2
ISSUED ON: November 30, ’95
Model Micro Sorter for A7 / N440 Volt/Hz
Modified Article Spring - Exit Sensor
Reason for
To ensure proper operation of the exit sensor
Modification
To ensure proper operation of the exit sensor feeler, a spring has been added.
Inter-
Old P/N New P/N Description Q’ty Used
A5572143 Spring - Exit Sensor
0 → 1
change-
ability
Exit Sensor Feeler
P/N 68022357
Spring Exit Sensor
Date of
Modification
Parts Catalog
Index No. Page
38 5
Serial Number
Exit Sensor Bracket
P/N 68022355
M. Iwasa, Manager
Technical Support Department
MODIFICATION BULLETIN NO. 6 PAGE 2 OF 2
ISSUED ON: November 30, ’95
MODEL NAME
NRG S313 220, 240/50 EUROPE etc. A327-25 280
INFOTEC S101 220, 240/50 EUROPE A327-26 3B0
RICOH CS120 220, 240/50 EUROPE etc. A327-27 A312
V/Hz DESTINATION CODE
REI PRODUCTION
SERIAL NUMBER
Loading...