Ricoh A 1045, A 1035 User Manual
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
1035/1045 Series
Operating Instructions
Copy Reference
Zdsh000j.eps
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
RICOH COMPANY, LTD.
15-5, Minami Aoyama 1-chome,
Minato-ku, Tokyo 107-8544, Japan
Phone: +81-(0)3-3479-3111
1035/1045 Series Operating Instructions
Overseas Affiliates
U.S.A.
RICOH CORPORATION
5 Dedrick Place
West Caldwell, New Jersey 07006
Phone: +1-973-882-2000
The Netherlands
RICOH EUROPE B.V.
Groenelaan 3, 1186 AA, Amstelveen
Phone: +31-(0)20-5474111
United Kingdom
RICOH UK LTD.
Ricoh House,
1 Plane Tree Crescent, Feltham,
Middlesex, TW13 7HG
Phone: +44-(0)20-8261-4000
Germany
RICOH DEUTSCHLAND GmbH
Mergenthalerallee 38-40,
65760 Eschborn
Phone: +49-(0)6196-9060
France
RICOH FRANCE S.A.
383, Avenue du Général de Gaulle
BP 307-92143 Clamart Cedex
Phone: +33-(0)1-40-94-38-38
Printed in China
UE USA B004-6607
Spain
RICOH ESPAÑA S.A.
Avda. Litoral Mar, 12-14,
08005 Barcelona
Phone: +34-(0)93-295-7600
Italy
RICOH ITALIA SpA
Via della Metallurgia 12,
37139 Verona
Phone: +39-045-8181500
Hong Kong
RICOH HONG KONG LTD.
21/F., Tai Yau Building,
181, Johnston Road,
Wan Chai, Hong Kong
Phone: +852-2862-2888
Singapore
RICOH ASIA PACIFIC PTE.LTD.
260 Orchard Road,
#15-01/02 The Heeren,
Singapore 238855
Phone: +65-830-5888
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two
GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect
reflected) eye contact with the laser beam might cause serious eye damage. Safety precautions and
interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, ⇒ P.1 “Machine Types”.)
• Type1: Aficio 1035/1035P
• Type2: Aficio 1045/1045P
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
⇒ P.237 “Power Connection”.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
USA (This information is for facsimile option users only.)
❖❖❖❖ FCC Requirements
1. This equipment complies with Part 68 of the FCC rules. On the cover of this equipment is a label
that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information must be provided to the telephone company.
2. This equipment uses the following USOC jack: RJ11C
3. The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive REN's on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0).
Contact the telephone company to determine the maximum REN for the calling area.
4. If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make necessary modifications in order to maintain
uninterrupted service.
6. In the event of operation problems (document jam, copy jam, communication error indication),
refer to the solving problems section in this manual.
7. If you cannot correct the problem, please contact the RICOH CORP. CUSTOMER SUPPORT
DEPT. at 1-800-FASTFIX for repair and warranty information. If it is causing harm to the telephone network, the telephone company may request you to disconnect the equipment from the
network until the problem is resolved.
8. This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
❖❖❖❖ WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
CANADA (This information is for facsimile option users only.)
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets telecommunications network protective, operational, and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements document(s). The department does not
guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the requirement that the sum of
the Ringer Equivalence Numbers of all the devices does not exceed 5.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
cccc means STAND BY.
Copyright © 2001 Ricoh Co., Ltd.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
1035G/1045G
Operating Instructions
Copy Reference
Zdsh000j.eps
Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
RICOH COMPANY, LTD.
15-5, Minami Aoyama 1-chome,
Minato-ku, Tokyo 107-8544, Japan
Phone: +81-(0)3-3479-3111
1035G/1045G Operating Instructions
Overseas Affiliates
U.S.A.
RICOH CORPORATION
5 Dedrick Place
West Caldwell, New Jersey 07006
Phone: +1-973-882-2000
The Netherlands
RICOH EUROPE B.V.
Groenelaan 3, 1186 AA, Amstelveen
Phone: +31-(0)20-5474111
United Kingdom
RICOH UK LTD.
Ricoh House,
1 Plane Tree Crescent, Feltham,
Middlesex, TW13 7HG
Phone: +44-(0)20-8261-4000
Germany
RICOH DEUTSCHLAND GmbH
Mergenthalerallee 38-40,
65760 Eschborn
Phone: +49-(0)6196-9060
France
RICOH FRANCE S.A.
383, Avenue du Général de Gaulle
BP 307-92143 Clamart Cedex
Phone: +33-(0)1-40-94-38-38
Printed in Japan
UE USA B003-6607
Spain
RICOH ESPAÑA S.A.
Avda. Litoral Mar, 12-14,
08005 Barcelona
Phone: +34-(0)93-295-7600
Italy
RICOH ITALIA SpA
Via della Metallurgia 12,
37139 Verona
Phone: +39-045-8181500
Hong Kong
RICOH HONG KONG LTD.
21/F., Tai Yau Building,
181, Johnston Road,
Wan Chai, Hong Kong
Phone: +852-2862-2888
Singapore
RICOH ASIA PACIFIC PTE.LTD.
260 Orchard Road,
#15-01/02 The Heeren,
Singapore 238855
Phone: +65-830-5888
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two
GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect
reflected) eye contact with the laser beam might cause serious eye damage. Safety precautions and
interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, ⇒ P.1 “Machine Types”.)
• Type1: Aficio 1035G
• Type2: Aficio 1045G
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts other
than genuine Ricoh parts in your Ricoh office product.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
⇒ P.237 “Power Connection”.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
USA (This information is for facsimile option users only.)
❖❖❖❖ FCC Requirements
1. This equipment complies with Part 68 of the FCC rules. On the cover of this equipment is a label
that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information must be provided to the telephone company.
2. This equipment uses the following USOC jack: RJ11C
3. The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive REN's on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0).
Contact the telephone company to determine the maximum REN for the calling area.
4. If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make necessary modifications in order to maintain
uninterrupted service.
6. In the event of operation problems (document jam, copy jam, communication error indication),
refer to the solving problems section in this manual.
7. If you cannot correct the problem, please contact the RICOH CORP. CUSTOMER SUPPORT
DEPT. at 1-800-FASTFIX for repair and warranty information. If it is causing harm to the telephone network, the telephone company may request you to disconnect the equipment from the
network until the problem is resolved.
8. This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
❖❖❖❖ WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
CANADA (This information is for facsimile option users only.)
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets telecommunications network protective, operational, and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements document(s). The department does not
guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the requirement that the sum of
the Ringer Equivalence Numbers of all the devices does not exceed 5.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
cccc means STAND BY.
Copyright © 2001 Ricoh Co., Ltd.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two
GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect
reflected) eye contact with the laser beam might cause serious eye damage. Safety precautions and
interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, ⇒ P.1 “Machine Types”.)
• Type1: 2535/2535P, 3502/3502P
• Type2: 2545/2545P, 4502/4502P
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Savin recommends that you use genuine toner.
Savin shall not be responsible for any damage or expense that might result from the use of parts other
than genuine parts in your office product.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
⇒ P.237 “Power Connection”.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
USA (This information is for facsimile option users only.)
❖❖❖❖ FCC Requirements
1. This equipment complies with Part 68 of the FCC rules. On the cover of this equipment is a label
that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information must be provided to the telephone company.
2. This equipment uses the following USOC jack: RJ11C
3. The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive REN's on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0).
Contact the telephone company to determine the maximum REN for the calling area.
4. If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make necessary modifications in order to maintain
uninterrupted service.
6. In the event of operation problems (document jam, copy jam, communication error indication),
refer to the solving problems section in this manual.
7. If you cannot correct the problem, please contact the SAVIN CORPORATION at 1-203-9675000 for repair and warranty information. If it is causing harm to the telephone network, the telephone company may request you to disconnect the equipment from the network until the problem is resolved.
8. This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
❖❖❖❖ WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
CANADA (This information is for facsimile option users only.)
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets telecommunications network protective, operational, and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements document(s). The department does not
guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the requirement that the sum of
the Ringer Equivalence Numbers of all the devices does not exceed 5.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
cccc means STAND BY.
SAVIN CORPORATION
333 Ludlow Street, Stamford, CT 06904
203-967-5000
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions in
this manual. Please keep this manual in a handy place near the machine.
Please read the Safety Information before using this machine. It contains important information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Operator Safety
This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two
GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect
reflected) eye contact with the laser beam might cause serious eye damage. Safety precautions and
interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis
and laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, ⇒ P.1 “Machine Types”.)
• Type1: 2235
• Type2: 2245
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the inch version.
For good copy quality, Savin recommends that you use genuine toner.
Savin shall not be responsible for any damage or expense that might result from the use of parts other
than genuine parts in your office product.
Power Source
120V, 60Hz, 12A or more
Please be sure to connect the power cord to a power source as above. For details about power source,
⇒ P.237 “Power Connection”.
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
USA (This information is for facsimile option users only.)
❖❖❖❖ FCC Requirements
1. This equipment complies with Part 68 of the FCC rules. On the cover of this equipment is a label
that contains, among other information, the FCC registration number and ringer equivalence
number (REN) for this equipment. If requested, this information must be provided to the telephone company.
2. This equipment uses the following USOC jack: RJ11C
3. The REN is used to determine the quantity of devices which may be connected to the telephone
line. Excessive REN's on the telephone line may result in the devices not ringing in response to
an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0).
Contact the telephone company to determine the maximum REN for the calling area.
4. If this equipment causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
5. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make necessary modifications in order to maintain
uninterrupted service.
6. In the event of operation problems (document jam, copy jam, communication error indication),
refer to the solving problems section in this manual.
7. If you cannot correct the problem, please contact the SAVIN CORPORATION at 1-203-9675000 for repair and warranty information. If it is causing harm to the telephone network, the telephone company may request you to disconnect the equipment from the network until the problem is resolved.
8. This equipment cannot be used on telephone company-provided coin service. Connection to
Party Line Service is subject to state tariffs.
❖❖❖❖ WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS TO
EMERGENCY NUMBERS:
1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or late evenings.
CANADA (This information is for facsimile option users only.)
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets telecommunications network protective, operational, and safety requirements as prescribed in
the appropriate Terminal Equipment Technical Requirements document(s). The department does not
guarantee the equipment will operate to the user's satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on
an interface may consist of any combination of devices subject only to the requirement that the sum of
the Ringer Equivalence Numbers of all the devices does not exceed 5.
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
cccc means STAND BY.
SAVIN CORPORATION
333 Ludlow Street, Stamford, CT 06904
203-967-5000
R
R
AdonisC2_ENcopy122F_FM.book Page i Thursday, February 15, 2001 3:23 PM
Safety Information
When using your equipment, the following safety precautions should always be
followed.
Safety During Operation
In this manual, the following important symbols are used:
WARNING:
CAUTION:
Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.
R WARNING:
• Connect the power cord directly into a wall outlet and never use an extension cord.
•
Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
• To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this manual.
• Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following conditions exists:
• You spill something into the equipment.
•
You suspect that your equipment needs service or repair.
• Your equipment's cover has been damaged.
•
Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open flame.
•
Disposal can take place at our authorized dealer or at appropriate collection sites.
•
Dispose of the used toner bottle in accordance with the local regulation.
i
AdonisC2_ENcopy122F_FM.book Page ii Thursday, February 15, 2001 3:23 PM
R CAUTION:
• Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
• Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.
• Keep toner (used or unused) and toner bottle out of the reach of children.
• For environmental reasons, do not dispose of the equipment or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer or at appropriate collection sites.
• The inside of the machine could be very hot. Do not touch the parts with a
label indicating the “hot surface”. Otherwise it could cause a personal burn.
• Our products are engineered to meet high standards of quality and functionality, and we recommend that you only use the expendable supplies available at an authorized dealer.
ii
R
R
AdonisC2_ENcopy122F_FM.book Page iii Thursday, February 15, 2001 3:23 PM
How to Read this Manual
Symbols
In this manual, the following symbols are used:
WARNING:
This symbol indicates a potentially hazardous situation that might result in
death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section.
CAUTION:
This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are included in the Safety
Information section.
• WARNINGS and CAUTIONS are notes for your safety.
Important
If this instruction is not followed, paper might be misfeed, originals might be
damaged, or data might be lost. Be sure to read this.
Preparation
This symbol indicates the prior knowledge or preparations required before operating.
Note
This symbol indicates precautions for operation or actions to take after misoperation.
Limitation
This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.
Reference
This symbol indicates a reference.
[]
Keys that appear on the machine's display panel.
{}
Keys built into the machine's control panel.
iii
AdonisC2_ENcopy122F_FM.book Page iv Thursday, February 15, 2001 3:23 PM
TABLE OF CONTENTS
Machine Types ........................................................................................... 1
What You Can Do with This Machine (Copy Mode)................................ 2
Guide To Components .............................................................................. 5
Output Tray Guide......................................................................................... 7
Options....................................................................................................... 8
Control Panel ............................................................................................. 9
Display Panel ........................................................................................... 11
Displays and Key Operations...................................................................... 11
Function List Based on Options ............................................................ 13
1.Basics
Turning On the Power ............................................................................. 15
Turning On the Main Power ........................................................................ 15
Turning On the Power ................................................................................. 16
Turning Off the Power................................................................................. 16
Changing Modes...................................................................................... 18
Originals................................................................................................... 19
Sizes and Weights of Recommended Originals.......................................... 19
Sizes Detectable by the Auto Paper Select ................................................ 20
Missing Image Area .................................................................................... 21
Copy Paper............................................................................................... 22
Recommended Paper Sizes and Types...................................................... 22
Direction-fixed paper or 2-sided paper........................................................ 25
Non-recommended Paper........................................................................... 26
Paper Storage ............................................................................................. 26
Toner......................................................................................................... 27
Handling Toner............................................................................................ 27
Toner Storage ............................................................................................. 27
Used Toner ................................................................................................. 27
2.Copying
Basic Procedure ...................................................................................... 29
Setting Originals...................................................................................... 31
Setting Originals on the Exposure Glass .................................................... 31
Setting Originals in the Document Feeder .................................................. 32
Original Orientation ..................................................................................... 32
Setting Special Originals............................................................................. 33
Mixed Size mode......................................................................................... 34
Setting Custom Size Originals .................................................................... 35
iv
AdonisC2_ENcopy122F_FM.book Page v Thursday, February 15, 2001 3:23 PM
Basic Functions....................................................................................... 37
Adjusting Copy Image Density .................................................................... 37
Selecting Original Type Setting................................................................... 39
Selecting Copy Paper ................................................................................. 40
Auto Reduce/Enlarge.................................................................................. 43
Sort/Stack/Staple ..................................................................................... 44
Sort.............................................................................................................. 45
Stack ........................................................................................................... 48
Staple.......................................................................................................... 50
To Stop Scanning Temporarily.................................................................... 55
When Memory Reaches 0% ....................................................................... 55
To Remove the Paper from the Staple Unit ................................................ 55
Punch........................................................................................................ 56
Copying from the Bypass Tray .............................................................. 60
When Copying onto OHP Transparencies or Thick Paper.......................... 63
Programs.................................................................................................. 64
Storing a Program....................................................................................... 64
Deleting a Program ..................................................................................... 65
Recalling a Program.................................................................................... 66
Job Preset ................................................................................................ 67
Other Functions....................................................................................... 68
Energy Saver Mode .................................................................................... 68
Interrupt Copy ............................................................................................. 68
Original Beeper ........................................................................................... 69
Sample Copy............................................................................................... 69
Changing the Number of Sets..................................................................... 70
Preset Reduce/Enlarge ........................................................................... 71
Create Margin mode ................................................................................... 72
Zoom......................................................................................................... 73
Size Magnification ................................................................................... 75
Directional Magnification (%) ................................................................. 77
Directional Size Magnification (Inch)..................................................... 79
Duplex/Combine/Series .......................................................................... 81
Original Direction and Completed Copies ................................................... 82
Originals and Copy Direction ...................................................................... 82
Specifying Orientation of Bound Originals .................................................. 82
Duplex....................................................................................................... 84
1 Sided → 2 Sided ...................................................................................... 84
2 Sided → 2 Sided ...................................................................................... 85
Combine ................................................................................................... 87
1 Sided 2 Pages → Combine 1 Side........................................................... 88
1 Sided 4 Pages → Combine 1 Side........................................................... 89
1 Sided 8 Pages → Combine 1 Side........................................................... 90
1 Sided 4 Pages → Combine 2 Side........................................................... 91
v
AdonisC2_ENcopy122F_FM.book Page vi Thursday, February 15, 2001 3:23 PM
1 Sided 8 Pages → Combine 2 Side........................................................... 92
1 Sided 16 Pages → Combine 2 Side......................................................... 93
2 Sided 2 Pages → Combine 1 Side........................................................... 94
2 Sided 4 Pages → Combine 1 Side........................................................... 95
2 Sided 8 Pages → Combine 1 Side........................................................... 96
2 Sided 4 Pages → Combine 2 Side........................................................... 97
2 Sided 8 Pages → Combine 2 Side........................................................... 98
2 Sided 16 Pages → Combine 2 Side......................................................... 99
Series/Book ............................................................................................ 101
Series Copies............................................................................................ 101
Copying Book Originals............................................................................. 104
Edit Image .............................................................................................. 112
Image Repeat............................................................................................ 112
Double Copies........................................................................................... 113
Centering................................................................................................... 114
Positive/Negative ...................................................................................... 115
Erase....................................................................................................... 116
Border Erase............................................................................................. 117
Center Erase............................................................................................. 118
Center/Border Erase ................................................................................. 119
Margin Adjustment ................................................................................ 121
Stamp...................................................................................................... 123
Background Numbering ............................................................................ 123
Preset Stamp ............................................................................................ 124
User Stamp ............................................................................................... 126
Program/Delete User Stamp..................................................................... 128
Date Stamp ............................................................................................... 130
Page Numbering ....................................................................................... 132
Cover/Slip Sheet .................................................................................... 138
Front Cover ............................................................................................... 138
Front/Back Covers .................................................................................... 140
Designate.................................................................................................. 141
Chapter ..................................................................................................... 143
Slip Sheets............................................................................................. 145
Combination Chart ................................................................................ 147
vi
AdonisC2_ENcopy122F_FM.book Page vii Thursday, February 15, 2001 3:23 PM
3.Document Server
Overview................................................................................................. 149
Process ..................................................................................................... 150
Features and Benefits ........................................................................... 151
On Demand Printing.................................................................................. 151
File Merge Printing.................................................................................... 152
Facsimile Resend...................................................................................... 154
Operation from a Computer ...................................................................... 154
Scanning Originals................................................................................ 156
Scanning in Document Server mode ........................................................ 156
Scanning in Copy mode ............................................................................ 159
Printing Saved Documents................................................................... 161
Sample Printing......................................................................................... 163
Print First Page ......................................................................................... 163
Searching Saved Documents ............................................................... 164
To Search by File Name ........................................................................... 164
To Search by User Name.......................................................................... 164
To Check the Details of Stored Documents .............................................. 165
Deleting Saved Documents .................................................................. 166
4.Troubleshooting
If Your Machine Does Not Operate as You Want ................................ 169
General ..................................................................................................... 169
Document Server ...................................................................................... 171
Display ...................................................................................................... 172
If You Cannot Make Clear Copies ........................................................ 173
If You Cannot Make Copies As You Want ........................................... 175
General ..................................................................................................... 175
Adjust Image ............................................................................................. 176
Stamp........................................................................................................ 177
Combine.................................................................................................... 177
Duplex....................................................................................................... 178
When Memory Is Full ................................................................................ 179
B Loading Paper................................................................................... 180
Loading Paper in Tray 1or 2...................................................................... 180
Loading Paper in Tray 3 or 4..................................................................... 181
Loading Paper in the Large Capacity Tray................................................ 182
D Adding Toner .................................................................................... 183
x Clearing Misfeeds ............................................................................. 186
Changing the Paper Size ...................................................................... 194
Changing the Paper Size in Tray 1 or 2.................................................... 194
Changing the Paper Size in Tray 3 or 4.................................................... 196
vii
AdonisC2_ENcopy122F_FM.book Page viii Thursday, Februa ry 15, 2001 3:23 PM
d Adding Staples ................................................................................. 198
1000-Sheet Finisher.................................................................................. 198
2 Tray Finisher .......................................................................................... 200
e Removing Jammed Staples ............................................................. 202
1000-Sheet Finisher.................................................................................. 202
2 Tray Finisher .......................................................................................... 204
y Removing Punch Waste................................................................... 206
5.User Tools (Copy/Document Server Features)
Accessing the User Tools (Copy/Document Server Features) ......... 207
Exiting From the User Tools...................................................................... 208
User Tools Menu (Copier/Document Server Features) ...................... 210
General Features
General Features
General Features
General Features
Reproduction Ratio
Reproduction Ratio
1
Edit
/2..................................................................................................... 222
2
Edit
/2..................................................................................................... 224
Stamp...................................................................................................... 227
Background Numbering ............................................................................ 227
Preset Stamp
User Stamp
Date Stamp ............................................................................................... 230
Page Numbering
Input/Output ........................................................................................... 233
1
/4.............................................................................. 212
2
/4.............................................................................. 215
3
/4.............................................................................. 217
4
/4.............................................................................. 218
1
/2.......................................................................... 219
2
/2.......................................................................... 220
1
/4-4/4.................................................................................. 227
1
/2-2/2..................................................................................... 229
1
/2-2/2............................................................................. 231
viii
AdonisC2_ENcopy122F_FM.book Page ix Thursday, February 15, 2001 3:23 PM
6.REMARKS
Do's And Don'ts..................................................................................... 235
Where to Put Your Machine.................................................................. 236
Machine Environment ............................................................................... 236
Moving....................................................................................................... 236
Power Connection..................................................................................... 237
Access to the Machine.............................................................................. 237
Maintaining Your Machine .................................................................... 238
Cleaning the Exposure Glass.................................................................... 238
Cleaning the Platen Cover ........................................................................ 238
Cleaning the Document Feeder ................................................................ 238
7.Specification
Mainframe............................................................................................... 239
Document Feeder (Option) ................................................................... 243
1000-Sheet Finisher (Option)................................................................ 244
2 Tray Finisher (Option) ........................................................................ 245
Punch Kit (Option)................................................................................. 247
Internal tray 2 (1 bin tray) (Option)....................................................... 248
Extarnal Tray (Option) ........................................................................... 249
Large Capacity Tray (LCT) (Option)..................................................... 250
Paper tray unit (Option) ........................................................................ 251
INDEX...................................................................................................... 252
ix
AdonisC2_ENcopy122F_FM.book Page x Thursday, February 15, 2001 3:23 PM
x
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
Machine Types
This machine comes in two models which vary by copy speed. To make sure
which model you have, see the inside front cover.
Type 1 Type 2
Copy speed
35 copies/minute (A4K, 8
×
11"K)
1
/2"
45 copies/minute (A4K, 81/2"
×
11"K)
1
AdonisC2_ENcopy122F_FM.book Page 2 Thursday, February 15, 2001 3:23 PM
What You Can Do with This Machine (Copy
Mode)
Positive/Negative
2
AdonisC2_ENcopy122F_FM.book Page 3 Thursday, February 15, 2001 3:23 PM
*1 Optional 2 Tray finisher is reguired.
*2 Optional Bridge unit and optional finisher are reguired.
Series/Book
Document Server
Front & Back
1 Sided & Booklet
2 Sided & Booklet
1 Sided & Magazine
2 Sided & Magazine
3
AdonisC2_ENcopy122F_FM.book Page 4 Thursday, February 15, 2001 3:23 PM
“Selecting Original Type Setting”
1.
⇒⇒⇒⇒
P.39
“Adjusting Copy Image Density”
2.
⇒⇒⇒⇒
P.37
“Setting Special Originals”
3.
“Image Repeat”
4.
“Double Copies”
5.
“Centering”
6.
“Erase”
7.
“Margin Adjustment”
8.
“Positive/Negative”
9.
10.
11.
12.
13.
Side”
14.
Side”
15.
Side”
16.
Side”
17.
Side”
18.
Side”
19.
Side”
20.
Side”
21.
Side”
22.
Side”
⇒⇒⇒⇒
“Stamp”
“1 Sided
“2 Sided
“1 Sided 2 Pages
⇒⇒⇒⇒
P.88
“1 Sided 4 Pages
⇒⇒⇒⇒
P.89
“1 Sided 8 Pages
⇒⇒⇒⇒
P.90
“2 Sided 2 Pages
⇒⇒⇒⇒
P.94
“2 Sided 4 Pages
⇒⇒⇒⇒
P.95
“2 Sided 8 Pages
⇒⇒⇒⇒
P.96
“1 Sided 4 Pages
⇒⇒⇒⇒
P.91
“1 Sided 8 Pages
⇒⇒⇒⇒
P.92
“1 Sided 16 Pages
⇒⇒⇒⇒
P.93
“2 Sided 4 Pages
⇒⇒⇒⇒
P.97
⇒⇒⇒⇒
P.114
P.116
⇒⇒⇒⇒
P.123
2 Sided”
→→→→
2 Sided”
→→→→
⇒⇒⇒⇒
⇒⇒⇒⇒
P.112
P.113
→→→→
→→→→
→→→→
→→→→
→→→→
→→→→
→→→→
→→→→
→→→→
→→→→
⇒⇒⇒⇒
P.121
⇒⇒⇒⇒
P.115
⇒⇒⇒⇒
P.84
⇒⇒⇒⇒
P.85
Combine 1
Combine 1
Combine 1
Combine 1
Combine 1
Combine 1
Combine 2
Combine 2
Combine 2
Combine 2
⇒⇒⇒⇒
P.33
“2 Sided 8 Pages
23.
Side”
⇒⇒⇒⇒
P.98
“2 Sided 16 Pages
24.
Side”
⇒⇒⇒⇒
P.99
“Book
25.
“Book
26.
“Front & Back
27.
P.103
“1 Sided
28.
“2 Sided
29.
“1 Sided
30.
“2 Sided
31.
“Preset Reduce/Enlarge”
32.
“Zoom”
33.
“Size Magnification”
34.
“Directional Magnification (%)”
35.
⇒⇒⇒⇒
P.77
“Directional Size Magnification
36.
(Inch)”
“Document Server”
37.
“Punch”
38.
“Sort”
39.
“Rotate Sort”
40.
“Stack”
41.
“Staple”
42.
“Front Cover”
43.
“Front/Back Covers”
44.
“Designate”
45.
“Chapter”
46.
“Slip Sheets”
47.
“Auto Reduce/Enlarge”
48.
⇒⇒⇒⇒
1 Sided”
→→→→
2 Sided”
→→→→
→→→→
→→→→
→→→→
→→→→
⇒⇒⇒⇒
P.79
⇒⇒⇒⇒
⇒⇒⇒⇒
P.45
⇒⇒⇒⇒
⇒⇒⇒⇒
Booklet”
Booklet”
Magazine”
Magazine”
P.73
P.56
P.48
P.50
⇒⇒⇒⇒
⇒⇒⇒⇒
P.143
⇒⇒⇒⇒
→→→→
⇒⇒⇒⇒
P.45
⇒⇒⇒⇒
P.138
P.141
P.145
Combine 2
→→→→
Combine 2
→→→→
⇒⇒⇒⇒
P.101
⇒⇒⇒⇒
P.102
2 Sided”
⇒⇒⇒⇒
⇒⇒⇒⇒
⇒⇒⇒⇒
⇒⇒⇒⇒
P.149
⇒⇒⇒⇒
P.105
P.106
⇒⇒⇒⇒
P.108
⇒⇒⇒⇒
P.109
⇒⇒⇒⇒
P.75
P.140
⇒⇒⇒⇒
P.43
⇒⇒⇒⇒
P.71
4
AdonisC2_ENcopy122F_FM.book Page 5 Thursday, February 15, 2001 3:23 PM
Guide To Components
1.
Document Feeder (ADF)
The document feeder automatically feeds
a stack of originals one by one.
2.
Exposure glass
Place originals here face down for copying. ⇒ P.19 “Originals”
3.
Internal tray
Copied paper is delivered here face
down.
4.
Main power switch
If the machine does not operate after
turning on the main power switch, check
if the main power switch is turned on. If
it is off, turn it on.
5.
Main power indicator
This indicator light up when the main
power switch is turned on, and goes off
when the switch is turned off.
6.
On indicator
This indicator lights up when the operation switch is turned on, and goes off
when the switch is turned off.
7.
Operation switch
Press this switch to turn the power on
(the On indicator light up). To turn the
power off, press this switch again (the On
indicator goes off).
8.
Control panel
⇒ P.9 “Control Panel”
9.
Duplex unit (Unit for two-sided
copies)
Makes two-sided copies.
10.
Front cover
Open to access the inside of the machine.
11.
Paper tray
Set paper here.
12.
Paper tray unit (Option)
13.
Holding stand
5
AdonisC2_ENcopy122F_FM.book Page 6 Thursday, February 15, 2001 3:23 PM
1.
Bypass tray
Use when copying onto OHP transparencies, adhesive labels, translucent paper,
postcards, and custom size paper.
1.
Ventilation hole
Prevents overheating. Do not obstruct
the ventilation hole by placing an object
near it or leaning an object against it. If
the machine overheats, a fault might occur.
2.
Right side cover
Open this when a paper jam occurs.
6
AdonisC2_ENcopy122F_FM.book Page 7 Thursday, February 15, 2001 3:23 PM
Output Tray Guide
When copying onto OHP transparencies and translucent paper, raise the guide.
This prevents copies from being curled when delivered.
❖❖❖❖ To copy onto normal paper and thick paper
Slide the guide in the direction of the arrow.
❖❖❖❖ To copy onto OHP transparencies and translucent paper
Insert your forefinger into the indent on the guide and slide the guide to the
right.
❖❖❖❖ To copy onto A3, 11” ×××× 17” paper
Raise the end fence.
7
AdonisC2_ENcopy122F_FM.book Page 8 Thursday, February 15, 2001 3:23 PM
Options
1.
1000-Sheet Finisher
Sorts, stacks, and staples copies.
2.
External tray
If you selected this as the output tray,
copied paper is delivered here face
down.
3.
Platen cover
Lower this cover over originals for copying.
4.
Document feeder (ADF) ⇒⇒⇒⇒ P.32
Insert a stack of originals here.
They will be fed automatically.
5.
Internal tray 2 (1 bin tray)
If you selected this as the output tray,
copied paper is delivered here face
down.
8
6.
Large Capacity Tray (LCT)
Holds 1,500 sheets of paper.
7.
Paper tray unit
Consists of two paper trays.
8.
Bridge unit
Relays copies to the external tray or finisher.
9.
2 Tray Finisher
Sorts, stacks, and staples copies. You can
also punch copies. (The Punch function is
optional.)
• 1: Finisher shift tray 1
• 2: Finisher shift tray 2
Loading...