7. Please correct the title of page 120 and 121, and INDEX to PARTS CATALOG as follows:
IncorrectCorrect
51. PRINTER BOARD (A099)51. SCANNER MOTOR CONTROL BOARD (A099)
INDEX
NO.
140
152
143
138
139
148
139
148
146
139
S. Hamano, Assistant General Manager
Technical Support Department
MODIFICATION BULLETIN NO. 1 PAGE 6 OF 6
ISSUED ON: March 31, ’94
MODEL NAME
Ricoh DS5330115/60U. S. A.A099-17
V/HzDESTINATIONCODESERIAL NUMBER
MODIFICATION BULLETIN NO. 2 PAGE 1 OF 3
ISSUED ON: June 30, ’94
ModelC4MFVolt/Hz
Modified ArticleReverse Roller Drive Shafts
Reason for
To reduce rumbling noise
Modification
Draw
No.
Old Parts
No.
AA140350A0602828Drive Shaft
06320100GPin - M2 x 10
A0602616A0602827Reverse Driven Shaft
06320100GPin - M2 x 10
08053145Ball Bearing - 6 x 12 x 4mm
A0602804A0602825Reverse Roller Driven Shaft
New Parts
No.
DescriptionRank
Q’ty Used
Old→New
1 → 1
1 → 0
1 → 0
1 → 0
1 → 0
2 → 2
Date of
Modification
Inter-
change-
ability
X/O233
X/O433
X/O2043
Parts needed for replacement by new part
Part No.DescriptionNo.Page
Serial
Number
Parts
Catalog
10733
10733
10833
06320100GPin - M2 x 10
08053145Ball Bearing - 6 x 12 x 4mm
A0602807A0602826Reverse Roller Shaft
06320100GPin - M2 x 10
50530447Bushing - 6mm
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for
replacement by new part" to install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether
the new part can be used in the old machine. x = Not interchangeable o = Interchangeable
2 → 0
2 → 0
2 → 2
2 → 0
2 → 0
X/O2443
10843
10543
10843
2343
MODIFICATION BULLETIN NO. 2 PAGE 2 OF 3
ISSUED ON: June 30, ’93
DETAILS OF MODIFICATION
The cylindrical pins on the reverse roller drive shaf ts of the side, the first and the second fee d sta tio n ha ve been
changed to the spring pins. To facilitate servicing, the assembled part s will be supplied as service parts in stead of the
individual parts as shown below.
Parts Catalog page 32
Parts Catalog page 42
Old
Old
New
New
S. Hamano, Assistant General Manager
Technical Support Department