MODIFICATION BULLETIN NO. 35 Page 1 of 3ISSUED ON: November 15, ’90
ModelF33/34Volt/Hz
Modified ArticlePositioning Stud
Reason for
To prevent the holder from flexing
Modification
Draw
No.
Old Parts
No.
AA143032Positioning Stud - End Block2 ---- 1X/2545
New Parts
No.
AA143302
AA148256Cap Nut0 ---- 1/X7745
Description
Positioning Stud - Front End
Block
Date of
Modification
A.B.C. Q’ty Used
Old →
RankPart No.DescriptionIndex No. Page
New
0 ---- 1/X as a set x/o7645
Inter-
change-
ability
Part needed for replacement by new partParts Catalog
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
DETAILS OF MODIFICATION
The positioning stud-end block (P/N AA143032) has been modified so that it can accept a cap nut. The cap nut
prevents the holder from flexing which could cause noise from the cleaning unit.
The old part (#AA143032) and new parts (P/N AA143302, P/N AA148256) are interchangeable as a set.
MODIFICATION BULLETIN NO. 35 Page 2 of 3ISSUED ON: November 15, ’90
Holder
Old
#25
P/N AA143032
Holder
#77
P/N AA148256
#76
P/N AA143302
New
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 35 Page 3 of 3ISSUED ON: November 15, ’90
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhall.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 38 Page 2 of 3ISSUED ON: Jan. 31, ’91
DETAILS OF MODIFICATION
1. As per field request the operation panel cover has been registered as a service part
2. Please correct the index No. in the illustration
1 62
# 1
# 1 # 62
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 38 Page 3 of 3ISSUED ON: Jan. 31, ’91
JAPAN PRODUCTIONREI PRODUCTION
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBERCODESERIAL NUMBER
P.B. D743115/60USA, CANADAA045-11A045-07
SAVIN 7430115/60USA, CANADAA045-15A045-08
NASHUA 3943D115/60S. AMERICA etc.A045-16
RICOH FT5570115/60USA, CANADAA045-17A045-06
NASHUA 3943D220,240/50EUROPE etc.A045-25
INFOTEC 9143DZ220,240/50EOROPE A045-26
RICOH FT5570220,240/50EUROPE etc.A045-27
NASHUA 3943115/60S. AMERICA etc.A045-56
NASHUA 3943220,240/50EUROPE etc.A045-65
INFOTEC 9143Z220,240/50EUROPE A045-66
RICOH FT5550220,240/50EUROPE etc.A045-67
P.B. D735115/60USA, CANADAA046-11A046-07
SAVIN 7334115/60USA, CANADAA046-15A046-08
NASHUA 3035115/60S. AMERICA etc.A046-16
RICOH FT5540115/60USA, CANADAA046-17A046-06
NASHUA 3035220,240/50EUROPE, etc.A046-25
INFOTEC 9135DZ220,240/50EUROPEA046-26
RICOH 5540220,240/50EUROPE, etc.A046-27
MODIFICATION BULLETIN NO. 40 Page 1 of 2ISSUED ON: April 15, ’91
ModelF33/34Volt/Hz
Modified ArticleCorona Wires
Reason for
To facilitate service
Modification
To facilitate service, the platinum corona wires have been registered as service parts.
For details, please refer to F33/34 RTB No. 014.
MODIFICATION BULLETIN NO. 40 Page 2 of 2ISSUED ON: April 15, ’91
JAPAN PRODUCTIONREI PRODUCTION
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBERCODESERIAL NUMBER
P.B. D743115/60USA, CANADAA045-11Service Parts OnlyA045-07Service Parts Only
SAVIN 7430115/60USA, CANADAA045-15Service Parts OnlyA045-08Service Parts Only
NASHUA 3943D115/60S. AMERICA etc.A045-16Service Parts Only
RICOH FT5570115/60USA, CANADAA045-17Service Parts OnlyA045-06Service Parts Only
NASHUA 3943D220,240/50EUROPE etc.A045-25Service Parts Only
INFOTEC 9143DZ220,240/50EOROPE A045-26Service Parts Only
RICOH FT5570220,240/50EUROPE etc.A045-27Service Parts Only
NASHUA 3943115/60S. AMERICA etc.A045-56Service Parts Only
NASHUA 3943220,240/50EUROPE etc.A045-65Service Parts Only
INFOTEC 9143Z220,240/50EUROPE A045-66Service Parts Only
RICOH FT5550220,240/50EUROPE etc.A045-67Service Parts Only
P.B. D735115/60USA, CANADAA046-11Service Parts OnlyA046-07Service Parts Only
SAVIN 7334115/60USA, CANADAA046-15Service Parts OnlyA046-08Service Parts Only
NASHUA 3035115/60S. AMERICA etc.A046-16Service Parts Only
RICOH FT5540115/60USA, CANADAA046-17Service Parts OnlyA046-06Service Parts Only
NASHUA 3035220,240/50EUROPE, etc.A046-25Service Parts Only
INFOTEC 9135DZ220,240/50EUROPEA046-26Service Parts Only
RICOH 5540220,240/50EUROPE, etc.A046-27Service Parts Only
MODIFICATION BULLETIN NO. 41 Page 1 of 2ISSUED ON: April 15, ’91
ModelF33/34Volt/Hz
Modified ArticleCleaning Blade
Reason for
Parts standardization
Modification
For the purpose of parts standardization, a new cleaning blade (P/N A0073565) replaces
cleaning blade P/N 52053565 and P/N A0093565.
The interchangeability of the old and new blades is O/O.
Old P/NNew P/NDescriptionQ’tyinterchangeabilityIndex No.Page
52053565A0073565Cleaning Blade1 → 1O/O4845
Date of
Modification
Serial Number
P/NModel in which cleaning blade is used
52053565F3/4, F9, F30/31, F33/34, F80, F85, F90
A0093565F12, F13, F23, F24, F25
T .Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 41 Page 2 of 2ISSUED ON: April 15, ’91
JAPAN PRODUCTIONREI PRODUCTION
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBERCODESERIAL NUMBER
P.B. D743115/60USA, CANADAA045-11A045-07
SAVIN 7430115/60USA, CANADAA045-15A045-08
NASHUA 3943D115/60S. AMERICA etc.A045-16
RICOH FT5570115/60USA, CANADAA045-17A045-06
NASHUA 3943D220,240/50EUROPE etc.A045-25
INFOTEC 9143DZ220,240/50EOROPE A045-26
RICOH FT5570220,240/50EUROPE etc.A045-27
NASHUA 3943115/60S. AMERICA etc.A045-56
NASHUA 3943220,240/50EUROPE etc.A045-65
INFOTEC 9143Z220,240/50EUROPE A045-66
RICOH FT5550220,240/50EUROPE etc.A045-67
P.B. D735115/60USA, CANADAA046-11A046-07
SAVIN 7334115/60USA, CANADAA046-15A046-08
NASHUA 3035115/60S. AMERICA etc.A046-16
RICOH FT5540115/60USA, CANADAA046-17A046-06
NASHUA 3035220,240/50EUROPE, etc.A046-25
INFOTEC 9135DZ220,240/50EUROPEA046-26
RICOH 5540220,240/50EUROPE, etc.A046-27
MODIFICATION BULLETIN NO. 42 Page 1 of 3ISSUED ON: April 30, ’91
Part needed for replacement by new partParts Catalog
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 42 Page 2 of 3ISSUED ON: April 30, ’91
DETAILS OF MODIFICATION
1. In answer to the field’s request, we have registered the cleaning brush drive shaft set
(#A0079520) as a service part. (This part number is mentioned in RTB No. 12)
This set is composed of the following parts:
ItemP/NDescriptionQ’ty
1A0073570Cleaning Brush Drive Shaft1
2AA143302Positioning Stud - Front End Block1
3AA148256Cup Nut1
2
1
3
2. The cleaning brush drive shaft included in this set (#A0079520) will be changed
from #A0073570 (round type pin) to #A0073573 (square type pin).
Therefore, the part number for the cleaning brush drive shaft set will be changed
from #A0079520 to #A0079521.
ItemP/NDescriptionQ’ty
1A0073573Cleaning Brush Drive Shaft1
2AA143302Positioning Stud - Front End Block1
3AA148256Cap Nut1
NOTE: An another MB for the change of the drive shaft will separatedly be issued as
soon as new shaft is fitted to the production machines.
Round Pin
2
1
Square Pin
T. Ito, Manager
Copier Technical Support
3
MODIFICATION BULLETIN NO. 42 Page 3 of 3ISSUED ON: April 30, ’91
JAPAN PRODUCTIONREI PRODUCTION
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBERCODESERIAL NUMBER
P.B. D743115/60USA, CANADAA045-11A045-07
SAVIN 7430115/60USA, CANADAA045-15A045-08
NASHUA 3943D115/60S. AMERICA etc.A045-16
RICOH FT5570115/60USA, CANADAA045-17A045-06
NASHUA 3943D220,240/50EUROPE etc.A045-25
INFOTEC 9143DZ220,240/50EOROPE A045-26
RICOH FT5570220,240/50EUROPE etc.A045-27
NASHUA 3943115/60S. AMERICA etc.A045-56
NASHUA 3943220,240/50EUROPE etc.A045-65
Modified ArticleCleaning Brush Drive Shaft and Cleaning Unit
Reason for
To improve durability
Modification
To improve durability the cleaning brush drive shaft has been changed from the round pin type to the square pin type.
For details please refer to RTB No. 12 issued on Feb. 15, ’91.
Old P/NNew P/NDescriptionQ’tyInterchangeabilityIndex No.Page