MODIFICATION BULLETIN NO. 11 Page 1 of 1 ISSUED ON: October 31, ’92
Model SP35 only Volt/Hz
Mod i fied Article Main ROM
Reason for
Software bag
Modification
To fix the below problems, the main ROM has been changed.
1. The first bin of the mini-sorter is not lifted when the sort mode is selected just after the main switch is on.
2. The second original is not registered/centered on copy in series copy modes.
Old P/N New P/N Description Interchangeability Index No. Page
A0425130 A0425131 IC - AMC27C512-155DC X/O 1 39
Date of
Modification
A042-15 8320306179
Serial Numbe r
T. Ito, Man ager
Copier Technical Support
MODIFICATION BULLETIN NO. 14 Page 1 of 2 ISSUED ON: October 31, ’92
Model SP35 only Volt/Hz
Mod i fied Article Optic s
Reason for
Modification
Draw
No.
Old Parts
No.
A0001629 A0001629 Wing - Side 5 → 25333
A0421363 A0421364 Left Scale Bracket 1 → 1 X/O * New Index No. 8 3 3
Date of
Modification
A042-15 8320306179
To prevent SC22
New Parts
No.
A0521668 Wing - Center 0 → 3 X/O * 66 33
Description
A.B.C.
Rank Part No. Description Index No. Page
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
Serial Numbe r
Rank : A : Repla ce with new parts immediately. B : Replace with new parts at time of repai r. C : Repla ce with new parts at tim e of ov erhaul.
Interchangeability:
(1) W hen old and new parts are not mutually interchangeable, us e additional parts or an assembly part as indicated in " Parts nee de d for replacemen t by new part" to
install the ne w pa rt.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new pa rt can be used
in the old machine. x = Not interchangeable o = I nterchangea ble
MODIFICATION BULLETIN NO. 14 Page 2 of 2 ISSUED ON: October 31, ’92
DETAILS OF MODIFICATION
When the screws which fix the exposure lamp wings are caught at the edge of the exposure glass, SC22 turns on.
To prevent this, the gap between the exposure glass and the first scanner has been widen by modifying the wings.
Also, the left scale bracket has been modified to minimize the warp.
T. Ito, Man ager
Copier Technical Support
MODIFICATION BULLETIN NO. 16 Page 1 of 1 ISSUED ON: October 31, ’92
Model SP35 only Volt/Hz
Mod i fied Article Paper Feed Section/ Development Tank Unit
Reason for
Due to part standa rdization
Modification
Draw
No.
Old Parts
No.
A0422710 A0892710 Front Cassette Holder 1 → 1O/O 39 9
A0422715 A0892715 Rear Cassette Holder 1 → 1O/O 69 9
A0422607 A0892607 Relay Sensor Actuator 1 → 1 O/O 32 13
A0002621 A0892621 Upper Guide Plate - Upper Feed 1 → 1 O/O 17 13
A0422635 A0892635 Guide Plate - Cover Feed 1 → 1 O/O 21 13
A0423409 A0893409 Base - Tank 1 → 1 O/O 12 19
New Parts
No.
Description
Date of
Modification
A.B.C.
Rank Part No. Description Index No. Page
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
Serial Numbe r
A0423414 A0893414 Drive Plate - Upper 1 → 1 O/O 18 19
A0423300 A0523300 Development Tank Unit 1 → 1O/O * 19
A0423412 A0523412 Density Sensor Bracket 1 → 1 O/O 62 19
T. Ito, Man ager
Copier Technical Support
MODIFICATION BULLETIN NO. 23 Page 1 of 1 ISSUED ON: October 31,’92
Model SP25 / SP35 Volt/H z
Mod i fied Article Optic s
Reason for
Due to part standa rdization
Modification
Inter-
Old P/N New P/N Description
A0001835 A0891835 Lens Position Cam X/O 11 35
change-
ability
Part Catalog
Index No. Pa ge
Date of
Modification
A042 - 15 8320306241
A052 - 15 6620306728
Serial Numbe r
T.Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 26 PAGE 1 OF 1
ISSUED ON: July 15, ’93
Model SP35 / 25 Volt/Hz
Modified Article
Reason for
Part standardization
Modification
Old P/N New P/N Description
A0002101 A0892101 Main Corona Unit Casing 1 → 1O/O 4 25
Q’ty Used
Old → New
Inter-
change-
ability
Parts Catalog
Index No. Page
Service parts only
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
Loading...