MODIFICATION BULLETIN NO. 77 Page 1 of 2ISSUED ON: Jan. 31, ’91
ModelF85Volt/Hz
Modified ArticleScrew
Reason for
Parts Standardization
Modification
Due to parts standardization, the following parts have been changed. The interchangeability is O/O.
PageIndexOld P/NNew P/NDescription
171110951300509513005BPhilips Screw With Flat Washer - M3 x 5
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
Page 2
MODIFICATION BULLETIN NO. 77 Page 2 of 2ISSUED ON: Jan. 31, ’91
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36SERVICE PART ONLY
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46
RICOH FT5520220,240/50EUROPE, etc.A011 - 47
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 3
MODIFICATION BULLETIN NO. 79 Page 1 of 2ISSUED ON: April 15, ’91
ModelF85Volt/Hz
Modified ArticleCleaning Blade
Reason for
Parts standardization
Modification
For the purpose of parts standardization, a new cleaning blade (P/N A0073565) replaces
cleaning blade P/N 52053565 and P/N A0093565.
The interchangeability of the old and new blades is O/O.
Old P/NNew P/NDescriptionQ’tyinterchangeabilityIndex No.Page
52053565A0073565Cleaning Blade1 → 1O/O1323
Date of
Modification
Serial Number
P/NModel in which cleaning blade is used
52053565F3/4, F9, F30/31, F33/34, F80, F85, F90
A0093565F12, F13, F23, F24, F25
T .Ito, Manager
Copier Technical Support
Page 4
MODIFICATION BULLETIN NO. 79 Page 2 of 2ISSUED ON: April 15, ’91
Part needed for replacement by new partParts Catalog
* New Index
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
Page 10
DETAILS OF MODIFICATION
Seal - 15x26x3Seal - 15x26x5
MODIFICATION BULLETIN NO. 82 Page 2 of 3ISSUED ON: July 31, ’91
To ensure the adhesion of seal between the sensor holder and toner
collection bottle, the thickness of the seals (Holder Both Side Tape and seal
- 15x26x3) have been increased by around 2mm.
Also, the shape of the holder both side tape has been changed because of
part standardization with other models.
Note: The holder both sided tape (#52153888, Index No.45) is not listed in
the parts catalog. Please add it to your parts catalog.
7.5
48
24
7.5
48
7.5
0.1
38.5
54
31
8
40
23.5
32
15
29.5
23.5
35
2
53
T. Ito, Manager
Copier Technical Support
Page 11
MODIFICATION BULLETIN NO. 82 Page 3 of 3ISSUED ON: July 31, ’91
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36SERVICE PART ONLY
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46SERVICE PART ONLY
RICOH FT5520220,240/50EUROPE, etc.A011 - 47
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 12
MODIFICATION BULLETIN NO. 83 Page 1 of 2ISSUED ON: February 15, ’92
ModelF85Volt/Hz
Modified ArticleLeft Fusing Unit Guide
Reason for
Parts standardization
Modification
Due to parts standardization, the following part has been changed. The interchangeability is O/O.
PageIndexOld P/NNew P/NDescription
1742A0084100A0604190Left Fusing Unit Guide
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
Page 13
MODIFICATION BULLETIN NO. 83 Page 2 of 2ISSUED ON: February 15, ’92
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36SERVICE PART ONLY
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46SERVICE PART ONLY
RICOH FT5520220,240/50EUROPE, etc.A011 - 47
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 14
MODIFICATION BULLETIN NO. 84 Page 1 of 2ISSUED ON: June 30, ’92
ModelF85Volt/Hz
Modified ArticleDrum
Reason for
To standardize the part number
Modification
The part number has been changed to standardize the part number of the drum.
Old P/NNew P/NDescriptionQ’ty UsedInterchangeability
5205959052059510Drum
1 → 1
O/O
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
Page 15
MODIFICATION BULLETIN NO. 84 Page 2 of 2ISSUED ON: June 30, ’92
RPL PRODUCTIONREI PRODUCTION
MODEL NAMEV/HzDESTINATION
CODESERIAL NUMBERCODESERIAL NUMBER
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36
NASHUA 7130220/50EUROPE, etc.A011 - 45Service Parts Only
INFOTEC 9034Z220/50EUROPEA011 - 46Service Parts Only
RICOH FT5520220,240/50EUROPE, etc.A011 - 47Service Parts Only
INFOTEC 9134Z220/50EUROPEA011 - 66Service Parts Only
Page 16
MODIFICATION BULLETIN NO. 85 Page 1 of 2ISSUED ON: August 15, ’92
ModelF85Volt/Hz
Modified ArticleDecal - Paper Level (OEM only)
Reason for
Due to parts standardization
Modification
Due to parts standardization , th e following part has been changed. The interchangeability is O/O.
PageIndexOld P/NNew P/NDescription
72854134835AA002010Decal - Paper Level
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
Page 17
MODIFICATION BULLETIN NO. 85 Page 2 of 2ISSUED ON: August 15, ’92
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36Service Part Only
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46Service Part Only
RICOH FT5520220,240/50EUROPE, etc.A011 - 47
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 18
T. Ito, Manager
Copier Technical Support
---------- OEM only
MODIFICATION BULLETIN NO. 86 Page 1 of 2ISSUED ON: December 31, ’92
ModelF85Volt/Hz
Modified ArticleRear Side Fence
Reason for
Due to parts standardization (OEM only)
Modification
Due to parts standardizat ion , the rear side fence has been chan ge d. The interchangeability is O/O.
Old P/NNew P/NDescriptionQ’tyIndexPage
52152727A0082727Side Fence - Rear
1 → 1
267
Date of
Modification
Serial Number
Page 19
MODIFICATION BULLETIN NO. 86 Page 2 of 2ISSUED ON: December 31, ’92
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36Service Parts Only
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46
RICOH FT5520220,240/50EUROPE, etc.A011 - 47
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 20
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 87 Page 1 of 2ISSUED ON: December 31, ’92
ModelF85Volt/Hz
Modified ArticleParts Catalog
Reason for
Parts Catalog Correction
Modification
Please correct your parts catalog as follows:
1. Parts Number Correction
Incorrect P/NCorrect P/NDescriptionQ’tyIndexPage
52152716Front Side Fence
A0082715Side Fence - Front
1 → 0
0 → 1
317
317
2. Illustration Correction
Please add the paper level decal (Index No. 28) to the illustra tio n as shown.
31
Date of
Modification
Serial Number
Incorrect
3. Quantity Correction
P/NDescriptionQ’tyIndexPage
AA002010Decal - Paper Level
1 →2
28
Correct
287
Page 21
MODIFICATION BULLETIN NO. 87 Page 2 of 2ISSUED ON: December 31, ’92
Part needed for replacement by new partParts Catalog
* New Index
Serial Number
Rank: A : Replace with new parts immediately.B : Replace with new parts at time of repair.C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
Page 23
MODIFICATION BULLETIN NO. 88 Page 2 of 3ISSUED ON: January 15, ’93
DETAILS OF MODIFICATION
As per field request, LEDs on the operation panel board have been registered as spare parts.
LED - LB-203MP
(Magnification Ratio In dica tor)
LED - SL-7284-20
(Copy Counter Indicator)
T. Ito, Manager
Copier Technical Support
Page 24
MODIFICATION BULLETIN NO. 88 Page 3 of 3ISSUED ON: January 15, ’93
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36Service Parts only
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46Service Parts Only
RICOH FT5520220,240/50EUROPE, etc.A011 - 47Service Parts Only
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 25
ISSUED ON: March 31, ’93
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 89 PAGE 1 OF 2
ModelF85Volt/Hz
Modified ArticleParts Catalog (Ricoh and NSA version only)
Reason for
Parts Catalog Correction
Modification
Please correct your parts catalo g as follows:
PageIndexIncorrect P/NCorrect P/NDescription
2335215360252053602Seal - Front Outer
Date of
Modification
Serial Number
Page 26
ISSUED ON: March 31, ’93
MODIFICATION BULLETIN NO. 89 PAGE 2 OF 2
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36Service Parts Only
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46
RICOH FT5520220,240/50EUROPE, etc.A011 - 47Service Parts Only
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 27
MODIFICATION BULLETIN NO. 90 PAGE 1 OF 2
ISSUED ON:December 31, ’93
ModelF85Volt/Hz
Modified ArticleArm Holder
Reason for
Parts standardization
Modification
Due to parts standardization with other model, the arm holder has bee n cha ng ed.
Inter-
Old P/NNew P/NDescription
52152834A0691972Arm HolderO/O711
change-
ability
Index No.Page
Parts Catalog
Date of
Modification
Serial Number
S. Hamano, Assistant General Manager
Technical Support Department
Page 28
MODIFICATION BULLETIN NO. 90 PAGE 2 OF 2
ISSUED ON: December 31, ’93
MODEL NAMEV/HzDESTINATION
RICOH FT5520115/60USA, CANADAA011 - 06
NASHUA 7130115/60S. AMERICA, etc.A011 - 36Service Parts Only
NASHUA 7130220/50EUROPE, etc.A011 - 45
INFOTEC 9034Z220/50EUROPEA011 - 46
RICOH FT5520220,240/50EUROPE, etc.A011 - 47Service Parts Only
INFOTEC 9134Z220/50EUROPEA011 - 66
RPL PRODUCTIONREI PRODUCTION
CODESERIAL NUMBERCODESERIAL NUMBER
Page 29
MODIFICATION BULLETIN NO. 91 PAGE 1 OF 2
Reissued on: March 31, ’96
ISSUED ON: February 15, ’96
ModelF85Volt/Hz
Modified Article
Reason for
Modification
Hot Roller
Material standardization
To standardize the teflon material, the hot roller has been changed.
Inter-
Old P/NNew P/NDescriptionQ’ty Used
52154320AE011003Hot Roller
1 → 1
change-
ability
O/O1817
Date of
Modification
Parts Catalog
Index No.Page
Serial Number
M. Iwasa, Manager
Technical Support Departme nt
Page 30
MODIFICATION BULLETIN NO. 91 PAGE 2 OF 2
Reissued on: March 31, ’96
ISSUED ON: February 15, ’96