MODIFICATION BULLETIN NO. 39 Page 1 of 3 ISSUED ON: July 31, ’91
Model M200/M201 Volt/Hz
Modified Article Black Development Roller
Reason for
To continue supplying parts
Modification
Draw
No.
Old Parts
No.
52163180 Black Development Roller 1 → 0 3 9 - 13
New Parts
No.
52169505 Development Roller Kit 0 → 1 X/O * 38 9 - 13
Description
Date of
Modification
A.B.C.
Rank Part No. Description Index No. Page
Q’ty Used
Old → New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
* New Index
Serial Number
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
DETAILS OF MODIFICATION
According to the M200/M201 MB No.31, the following parts were changed to standardize with the M210.
MODIFICATION BULLETIN NO. 39 Page 2 of 3 ISSUED ON: July 31, ’91
P/N 52163180 P/N AD031130
P/N 52163141 P/N A0273141
X/X
O/O (As a set)
X/X
However, P/N 52163180 (black development roller) is no longer available. To continue supplying parts to the
field, P/N 52169505 has been registered as a service part instead of P/N 52163180.
P/N 52169505 (Development Roller Kit)
Contents 1. P/N AD031130 (Development Roller) 1pc
2. P/N A0273141 (Development Bias Brush) 1pc
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 39 Page 3 of 3 ISSUED ON: July 31, ’91
JAPAN PRODUCTION RIF PRODUCTION
V/Hz DESTINATION
MODEL NAME
NASHUA 6115 115/60 S. AMERICA, etc. A005-16
RICOH FT2010 115/60 USA, CANADA A005-17
RICOH M100 110/60 TAIWAN A005-19
NASHUA 6115 220, 240/50 EUROPE, etc. A005-25 A005-45
KALLE 9016S 220, 240/50 EUROPE A005-26 A005-46
RICOH M100 220, 240/50 EUROPE, etc. A005-27 A005-47
CODE SERIAL NO. CODE SERIAL NO.
RICOH FT2220 115/60 USA, CANADA A005-57
aurora AC2501 110/60 TAIWAN A005-99
MODIFICATION BULLETIN NO. 40 Page 1 of 2 ISSUED ON: December 15, ’91
Model M200/M201 Volt/Hz
Modified Article Cooling Fan Motor
Reason for
Vendor Change
Modification
Due to vendor change, the part number of the cooling fan motor has been changed. The interchangeability is O/O.
Old P/N New P/N Description Page Index
A0055510 AX020061 Cooling Fan Motor - 115V/60HZ 9 7
A0055610 AX020062 Cooling Fan Motor - 220V/50HZ 9 7
Date of
Modification
Serial Number
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 40 Page 2 of 2 ISSUED ON: December 15, ’91
JAPAN PRODUCTION RIF PRODUCTION
MODEL NAME V/Hz DESTINATION
CODE SERIAL NO. CODE SERIAL NO.
NASHUA 6115 115/60 S. AMERICA, etc. A005-16
RICOH FT2010 115/60 USA, CANADA A005-17
RICOH M100 110/60 TAIWAN A005-19
NASHUA 6115 220, 240/50 EUROPE, etc. A005-25 A005-45
KALLE 9016S 220, 240/50 EUROPE A005-26 A005-46
RICOH M100 220, 240/50 EUROPE, etc. A005-27 A005-47
RICOH FT2220 115/60 USA, CANADA A005-57
aurora AC2501 110/60 TAIWAN A005-99
MODIFICATION BULLETIN NO. 41 Page 1 of 3 REISSUED ON: April 30, ’92
Model M200 Volt/Hz
Modified Article Paper Tray Magnet
Reason for
To facilitate manufacturing
Modification
Draw
No.
Old Parts
No.
AA020004 AA020015 Paper Tray Magnet
New Parts
No.
Description
Date of
Modification
A.B.C. Q’ty Used
Old →
Rank Part No. Description Index No. Page
New
1 → 1
Inter-
change-
ability
X/X 67 3
Part needed for replacement by new part Parts Catalog
Serial Number
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
MODIFICATION BULLETIN NO. 41 Page 2 of 3 REISSUED ON: April 30, ’92
DETAILS OF MODIFICATION
To facilitate manufacturing, the configuration of the tray magnet has been changed as shown in the illustration. Also, the material
of the magnet has been changed from ferrite to rubbermagnet.
Paper Tray Magnet
4mm
P/N AA020004
8mm
Old
P/N AA020015
3.5mm
5.5mm
New
The interchangeability of the magnet itself is X/X.
However, the interchangeability of the paper tray ass’y (Index 85, including the paper tray magnet) as shown in the illustration is
O/O (The part number is not changed.)
Paper Tray Magnet
(Paper Tray Ass’y)
85
53
41
T. Ito, Manager
Copier Technical Support
MODIFICATION BULLETIN NO. 41 Page 3 of 3 REISSUED ON: April 30, ’92
JAPAN PRODUCTION RIF PRODUCTION
MODEL NAME V/Hz DESTINATION
CODE SERIAL NO. CODE SERIAL NO.
NASHUA 6115 115/60 S. AMERICA, etc. A005-16 9520315720
RICOH FT2010 115/60 USA, CANADA A005-17 23203XXXXX
RICOH M100 110/60 TAIWAN A005-19 23202XXXXX
NASHUA 6115 220, 240/50 EUROPE, etc. A005-25 9520215616 A005-45
KALLE 9016S 220, 240/50 EUROPE A005-26 363032XXXX A005-46
RICOH M100 220, 240/50 EUROPE, etc. A005-27 23203XXXXX A005-47
RICOH FT2220 115/60 USA, CANADA A005-57 23203XXXXX
aurora AC2501 110/60 TAIWAN A005-99 0012020015
Reissued on: May 31, ’92
MODIFICATION BULLETIN NO. 42 Page 1 of 3 ISSUED ON: April 30, ’92
Model M200 / M201 Volt/Hz
Modified Article Caution Decal - Dev. Unit
Reason for
To instruct the customer to install the development unit properly
Modification
Draw
No.
Old Parts
No.
New Parts
No.
A0274879 Caution Decal - Dev. Unit 0 1 * 100 9 - 3
Description
Date of
Modification
A.B.C.
Rank Part No. Description Index No. Page
Q’ty Used
Old New
Inter-
change-
ability
Part needed for replacement by new part Parts Catalog
* New Index
Serial Number
Rank: A : Replace with new parts immediately. B : Replace with new parts at time of repair. C : Replace with new parts at time of overhaul.
Interchangeability:
(1) When old and new parts are not mutually interchangeable, use additional parts or an assembly part as indicated in "Parts needed for replacement by new part" to
install the new part.
(2) The mark to the left of the slash indicates whether the old part can be used in the new machine, and the mark to the right indicates whether the new part can be used
in the old machine. x = Not interchangeable o = Interchangeable
Copier Technical Support
DETAILS OF MODIFICATION
The pins of the
development unit must be
positioned on the grooves
of the development guide.
MODIFICATION BULLETIN NO. 41 Page 2 of 3 ISSUED ON: March 31, ’92
When the upper unit is opened and closed after the development unit is set
improperly, the front (P/N A0273160) and rear (P/N A0273162) development
guides may be damaged.
To instruct the customer to install the development unit properly, the caution
decal (P/N A0274879) has been added to the lower front cover as shown.
Caution Decal - Dev. Unit
(P/N A0274879)
T. Ito, Manager
MODIFICATION BULLETIN NO. 41 Page 3 of 3 ISSUED ON: March 31, ’92
JAPAN PRODUCTION RIF PRODUCTION
MODEL NAME V/Hz DESTINATION
CODE SERIAL NO. CODE SERIAL NO.
NASHUA 6115 115/60 S. AMERICA, etc. A005-16 9520315699
RICOH FT2010 115/60 USA, CANADA A005-17 232030XXXX
RICOH M100 110/60 TAIWAN A005-19 2320266080
NASHUA 6115 220, 240/50 EUROPE, etc. A005-25 9520215624 A005-45
KALLE 9016S 220, 240/50 EUROPE A005-26 3630220001 A005-46
RICOH M100 220, 240/50 EUROPE, etc. A005-27 232030XXXX A005-47
RICOH FT2220 115/60 USA, CANADA A005-57 232030XXXX
aurora AC2501 110/60 TAIWAN A005-99 0012020001
T. I\, Manage‘Copier
Technical Support
MODIFICATION BULLETIN NO. 43 Page 1 of 2 ISSUED ON: August 15, ’92
Model M200 Volt/Hz
Modified Article Operating Instructions - Chinese
Reason for
Customs clearance (Taiwan)
Modification
To clear this copier through Taiwan ese customs, the Chinese operat ing instructions now have
to be included in the machine carton box. Please add the following part number to your parts
catalog.
Page Index P/N Description
9 - 29 * 7 A0058608 Operating Instructions - Chinese
9 - 29 * 7 A0058609 Operating Instructions - Chinese (Aurora)
Date of
Modification
Serial Number
MODIFICATION BULLETIN NO. 43 Page 2 of 2 ISSUED ON: August 15, ’92
JAPAN PRODUCTION RIF PRODUCTION
MODEL NAME
NASHUA 6115 115/60 S. AMERICA, etc. A005-16
RICOH FT2010 115/60 USA, CANADA A005-17
RICOH M100 110/60 TAIWAN A005-19 2311165506
NASHUA 6115 220, 240/50 EUROPE, etc. A005-25 A005-45
KALLE 9016S 220, 240/50 EUROPE A005-26 A005-46
RICOH M100 220, 240/50 EUROPE, etc. A005-27 A005-47
RICOH FT2220 115/60 USA, CANADA A005-57
V/Hz DESTINATION
CODE SERIAL NO. CODE SERIAL NO.
aurora AC2501 110/60 TAIWAN A005-99 0011100001
Loading...