Model Number: S3
Bluetooth Speaker
Quick Start Guide
1
2 Mode / Charging LED indicator 7 Mini USB socket
3
4
5 Pause/Play/Hands-free 10 Foot Cushion
Power on/o ff
V / Previous Song 8 Micro Hole
+ V+ / Next Song
6 Aux-in Hole
9 Strap-Hook
Charging The Bluetooth Speaker
1. Connect the Bluetooth Speaker’s Mini USB socket (7) with the Computer’s USB port
through USB cable.
2. The Charging LED (2) will turn ON in red light; the rechargeable battery is in
charging.
3. The Charging LED (2) red light will turn OFF when the rechargeable battery is fully
charged.
Bluetooth Speaker Pairing / Reconnecting
1. Press and hold the button (1) for 2 - 3 seconds, a tone sound will announce
from speaker and the Mode LED (2) will blinking between blue and red, the device
is turned ON and goes into reconnect / searching mode for pair depend on status;
2. Now, turn ON the Bluetooth function on your device, search for device name
“BLT-10” and select it to pair.
3. If pairing is successful, a tone sound will announce from speaker and the Mode LED
(2) light will switch to slow blink in blue (every 3 seconds once).
4. The Bluetooth Speaker will be reconnecting automatically if your mobile phone has
been paired. (Depend on the mobile phone’s type and configuration, manual
reconnection may require on some devices)
5. Press and hold the
Bluetooth speaker turned to OFF when you not use it.
button (1) for 2 - 3 seconds, a tone sound will announce and
1
Note: During in searching / pairing mode, the Bluetooth Speaker will power OFF
automatically in 5 minutes if no device is connected and idle.
Bluetooth Speaker Control Function
1. In playing music, press button (5) to pause music, press it once again to play.
2. Pressing or press and hold the + button (4) to increases the volume level.
3. Pressing or press and hold the
4. When maximum or minimum volume is reached, a tone sound will be heard.
5. Press the + button (4) to play next music file.
6. Press the
button (3) to play previous music file.
button (3) to decreases the volume level.
Hand Free Function
1. When there is an incoming call;
2. The ringing sound will up and the playing music will pause automatically.
3. Press
4. Now you have hand free function with the Bluetooth speaker.
5. Press
6. The paused music will start to play automatically.
Tip: speak to the MIC hole (8) direct with distance in 30 cm to get the best
speakerphone performance when necessary.
button (5) to pick up the call if you want.
button (5) again to hang up the call when finished.
Redial For Last Call function
1. To redial for last called number by the Bluetooth Speaker, even it is in music playing
mode.
2. Press twice the
switch to hand free function for redial.
3. Press the
button (5) to enter into redial function, the playing will pause and
button (5) again to hang up the redial call.
Low Power Reminder And Auto Sleep
1. The Bluetooth Speaker will send tone sound once in very few seconds, when you
heard this tone sound, please connect the device to the USB power for charging if
you still want to use the device.
2. If not, the Bluetooth Speaker will power Off to sleep mode when the battery is
keeping low energy level in minutes.
Reset The Bluetooth Speaker
1. In some circumstances the device’s function may hanging and need to reset. T o reset
the Bluetooth speaker;
2. Press and hold the
reset and will turn Off and turn On automatically.
Important: Do not reset the device if it is proper working.
button (3) and + button (4) at the same time. The device is
2
Loading...