Rice Lake Weighing Systems is an ISO 9001 registered company
Software revision 11439, September 2014, Rev. B
IIBariatric Handrail Scale Operation Manual
1.0Introduction
The Rice Lake Digital Bariatric Handrail Scale with fold down seat is designed for weighing bariatrics and
ensures sound, accurate weighing information. A non-skid platform paired with side rails assists persons who
need extra support and safety. The fold down chair allows patients to sit down while being weighed. The scale is
set up to use motion sensing technology, to determine the actual weight of a moving patient. The weight is
displayed on the indicator and can be displayed in pounds or kilograms and has a 1000 lb capacity.
This manual can be viewed and downloaded from the Rice Lake Weighing Systems web site at
www.ricelakehealth.com. Technical information on this product and othe
available on the Rice Lake We
ighing Systems web site.
r medical products are
Figure 1-1. Digital Bariatric Handrail Scale with Fold Down Chair (250-10-4)
1
Bariatric Handrail Scale Operation Manual
2.0Safety
Important
Caution
Warning
Warning
There are certain precautions that should be taken to prevent personal injury to the user and damage to your
scale.
2.1Safety Signals
Safety Signal Definitions:
Indicates a potentially hazardous situation that, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous s
moderate injury.
Indicates information about procedures that, if not observed, could result in damage to
equipment
.
tuation that, if not avoided, may result in minor or
i
2.2Safety Precautions
Do not operate or work on this equipment unless you have read and understand
instructions in the manual. Failure to follow the instructions or heed t
result in injury or death. Contact any Rice Lake Weighing Systems dealer for replacement
manuals. Proper care is your responsibility.
Before attempting to operate this unit, make sure every individual who operates or works
with this unit has read and understands the following safety informat
these instructions carefully.
•Do not drop the scale or subject it to violent shocks.
•For accurate weighing, the scale must be placed on a flat, stable surface.
•Do not transport the scale while someone is standing on it.
•Weight exceeding the maximum capacity (1000 lb/453 kg) may da
•Operating at voltages and frequencies other than
•If the
LO Bat indicator activates, for accurate weighing, replace the batteries or connect the scale to an AC
power source as soon as possible.
•To avoid cross contamination, the scale should be
•Avoid contact with excessive moisture.
•Do not allow minors (children) or inexperie
nced persons to operate this scale.
•Do not jump up and down on the scale.
•Do not use in the presence of flammable materials.
•Do not make alterations or modifications
to the scale.
•People with disabilities, or who are physically frail, should always be assis
using this scale.
•Do not use the scale on slippery surfaces, such as a wet floor.
•Do not use this scale when your body/feet a
re wet, such as after taking a bath.
specified could damage the equipment.
cleaned regularly.
he warnings could
ion. Please follow
mage your scale.
ted by another person when
2 Bariatric Handrail Scale Operation Manual
3.0Scale Assembly
Important
Note
3.1Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
•The scale
•This manual
•Six AA batteries
•6 mm Allen Key
3.2Repacking
If the Digital Bariatric Handrail Scale must be returned for modification, calibration or repair, it must be properly
packed with sufficient packing materials. Whenever possible, use original carton when shipping the scale back.
Damage caused by improper packaging is not
3.3Setting Up Your Scale
Use the following steps to set up the Digital Bariatric Handrail Scale with seat.
1. Locate the manual from inside the box and set aside
removal and set up.
2. Move the scale into the area where the weighing process will occur.
on a hard, level surface for the most accurate weighments. Thin carpeting is fine but not recommended.
3. Using two people, remove the scale out of the packaging material that it
of the box by the scale base.
covered by the warranty.
as it will provide instructions on the proper scale
It’s recommended to place the scale
came in by lifting the scale out
DO NOT lift the scale out of the box by its handle as this can cause the hinges to break.
4. Gently set the scale platform down to the floor.
5. Loosen the handles and unfold an
6. Tighten the two hinges on the scale by rotating the two handles. This will secure the handrail mounted
indicator
7. Screw in all four legs.
8. Attach the wrap around rails.
9. Tighten the hex screw head using the enclosed 6 mm Allen key
.
Figure 3-1. Secure the Handrail by Tightening the Durable Hinges