WIRELESS CONTROL RELAYS WITH TWOWAY COMMUNICATION
RIBW01C-EN3
Enclosed EnOcean® Enabled Wireless Relay
Receiver / Repeater 5 Amp SPST-N/O,
120 Vac Power Input
Org
Blk
120 Vac
Wht
Neutral
Wireless
Receiver
Control
Circuit
SPECIFICATIONS
# Relays & Contact Type:
Expected Relay Life:
Operating Temperature:
Humidity Range:
Red LED:
Dimensions:
Wires:
Approvals:
Agency Compliance:
Gold Flash:
Override Switch:
Frequency:
Receiver Sensitivity:
Conducted Power:
Built-in Switch Modes:
N/O
Org
N/O
One (1) SPST Continuous Duty Coil
10 million cycles minimum mechanical
-30 to 140° F
5 to 95% (noncondensing)
Relay Status / Learn Mode Status (Flashing)
4.60
˝ x 1.20˝ x 1.70˝
16˝, 600V Rated
UL Listed, UL916, C-UL
FCCID: SZV-TCM320U
IC: 5713A-TCM320U
No
No
902 MHz
-93 dBm typical
5 mW typical
Alarm, Repeater, Delay, Rocker, Momentary,
and Toggle
RIBW02C-EN3
Enclosed EnOcean® Enabled Wireless Relay
Receiver / Repeater 5 Amp SPST-N/O,
208-277 Vac Power Input
Org
Blk
208-277 Vac
Red
Neutral or
Other Phase
Wireless
Receiver
Control
Circuit
Contact Ratings:
5 Amp Ballast @ 120/277 Vac
5 Amp Tungsten @ 120 Vac
5 Amp Electronic Ballast @ 120 Vac
Power Input Ratings:
75
mA @ 120 Vac ; 60 Hz (RIBW01C-EN3)
100 mA @ 208-277 Vac ; 60 Hz (RIBW02C-EN3)
N/O
Org
N/O
Made in USA
Meets
“Buy American”
of ARRA 2009
SMALLER SIZE DESIGN TO FIT INSIDE BALLAST
HOUSING OF FLUORESCENT LIGHT FIXTURE.
Notes:
• Compatible with Enocean® 902 MHz
Switches/Transmitters.
• Typical range: 50-150 ft.
• Open area transmission could be farther.
Consult factory for more information.
• Repeater function only rebroadcasts original
EnOcean® transmission. Up to two repeaters
can be used.
•
Version 1.5 rmware or later implements Functional
Devices, Inc.’s EnOcean® Manufacturer ID of 0x055.
• For setup instructions, see website for
-EN3 Series:
www.functionaldevices.com/pdf/bulletins/B1867_393231.pdf
or scan QR code with your smart phone.
071717
Loading...