RIB,Relay In A Box,Functional Devices RIBTWX2401SB-LN Data Sheet

RELAYS

The relay will go to the default state when the communication timer times out. Setting the timer value
to zero will cause the communication to never time out.

It is recommended to put a value in nci Max Send T to ensure the RIB re-synchronizes itself on the net­work after power loss. It is the responsibility of the user to ensure this value does not cause conicts in
network trac. (No value = No “heartbeat” updates / no re-sychronization; Low Value = Many updates
but may cause many trac collisions; High value = Few updates but many less collisions.)

Notes:

• Normally Open or Normally Closed selected by yellow

jumper wire.

•

Order NEMA 4 housing by adding “-N4” to end of model

number. (RIBTWX2401SB-LN-N4)

• Order with grey lid by adding “-GY” to end of model

number. (RIBTWX2401SB-LN-GY)

• Order NEMA 4 housing with grey lid by adding “-N4-GY”

to end of model number. (RIBTWX2401SB-LN-N4-GY)

• When connecting 24 Vac to both the RIB(s) and a

half-wave device, damage to device can occur.
Option 1: Use separate transformers for each device.
Option 2: Add diode between devices, see Option 2
note below. ^^

Contact Ratings:

20 Amp Resistive @ 277 Vac
20 Amp Ballast @ 120/277 Vac (N/O)
10 Amp Ballast @ 120/277 Vac (N/C)

Not rated for Electronic Ballast

10 Amp Tungsten @ 120 Vac (N/O)
1110 VA Pilot Duty @ 277 Vac
770 VA Pilot Duty @ 120 Vac
2 HP @ 277 Vac
1 HP @ 120 Vac

Power Input Ratings:

105 mA @ 24 Vac
78 mA @ 24 Vdc
105 mA @ 120 Vac

Current Sensor Range:

0.25 - 20 Amps

Threshold xed at .25 Amps.

RIBMNWX2401SB-LN

2.75˝ Track Mount LonWorks® Twisted-Pair FT-10

Network Dual I/O Device; One Binary Output (20
Amp Relay SPST + Override); One Binary Input
(Current Sensor 0.25 - 20 Amp, Relay Load
Sensing), 24 Vac/dc or 120 Vac Power Input

RIBTWX2401SB-LN

Enclosed LonWorks® Twisted-Pair FT-10 Network

Dual I/O Device; One Binary Output (20 Amp
Relay SPST + Override); One Binary Input
(Current Sensor 0.25 - 20 Amp, Relay Load
Sensing), 24 Vac/dc or 120 Vac Power Input

LON

LON

Internal
Current

Sensor

Open Loop

Sensor Object *

CLOSED

OPEN

AUTO

Selectable Jumper Wire

Not used

GREEN LED = Network Status

RED LED = Relay Activated

YELLOW LED = Service

PINK LED = Current Flow

Service Button

24 Vac/dc

Com

120 Vac

Com

Channel:

Transceiver Type:

Functional Blocks:

Downloadable Files:

# Relays & Contact Type:

Expec

ted Relay Life:

Operating Temperature:

Humidity Range:

Operate Time:

Green LED:

Red LED:

Yellow LED:

Dimensions:

Track Mount:

Approvals:

Housing Rating:

Gold Flash:

Override Switch:

One (1) SPST Continuous Duty Coil
10 million cycles minimum mechanical

-30 to 140° F
5 to 95% (noncondensing)
18ms
Network Status
Relay Status
Service Status

6.00˝ x 2.75˝ x 1.75˝ (RIBMNWX2401SB-LN)

7.00˝ x 4.28˝ x 2.00˝ with .75˝ NPT N

ipple
(RIBTWX2401SB-LN)
MT212-6 Mounting Track Provided
FCC, LonMark®
UL Listed, UL916, C-UL
UL Listed, NEMA 1, C-UL, CE Approved,
UL Accepted for Use in Plenum,
Also available NEMA 4 / 4X
No
Yes

TP/FT-10
FT5000 Smart Transceiver
0000 Node Object
0004 Closed Loop Actuator Object
0001 Open Loop Sensor Object
PDF, XIF, APB, VSS and NXE
available on website.

Made in USA

Meets

“Buy American”

of ARRA 2009

Node Object

nvi Request nvo Status

NV1 NV2

DESCRIPTION SNVT NAME SNVT TYPE

Command to open/close relay nvi Value SNVT_switch

Command status of relay nvo Value Fb SNVT_switch

Default state of relay on/o nci Default SNVT_switch

Communication timer nci Max Receive T SNVT_elapsed_tm

Status of Binary Input nvo Value SNVT_switch

Invert status of Binary Input nci Invert SNVT_lev_disc

Max time between updates nci Max Send T SNVT_elapsed_tm

Min time between updates nci Min Send T SNVT_elapsed_tm

Closed Loop Actuator

Node Object

nvi Value

NV1

nvo Value Fb

NV2

nci Default

nci Max Receive T

nvi Request nvo Status

NV1 NV2

(Binary Output)

Closed Loop Actuator

Node Object

nvi Value

NV1

nvo Value Fb

NV2

nci Default

nci Max Receive T

* Open Loop Sensor Object

nvo Value

NV1

nvi Request nvo Status

nci Invert
nci Max Send T
nci Min Send T

NV1 NV2

(Binary Output)

(Binary Input)

SPECIFICATIONS

NETWORK COMPATIBLE RELAY / CURRENT SENSOR COMBOS

Half-Wave Device

RIBMNWX2401SB-LN or RIBTWX2401SB-LN

Com

24 Vac/dc

Com

24 Vac

24 Vac

IN4004

Add diode on 24 Vac power (Com) interconnection
between devices. Band on diode faces towards RIB(s).

^^ Option 2:

071417