RELAYS
10 AMP PILOT CONTROL RELAYS
RIBRL1C
DIN Mount Relay 10 Amp SPDT with
10-30 Vac/dc Coil
10-30V COM
Relay LED
Not Used
Open Lid this SideOpen Lid this Side
Specications
# Relays & Contact Type:
Expected Relay Life:
Operating Temperature:
Humidity Range:
Operate Time:
Relay Status:
Dimensions:
Terminal Strip:
Approvals:
Gold Flash:
Replacement Relay:
Accessories:
One (1) SPDT Continuous Duty Coil
10 million cycles minimum mechanical
-30 to 140° F
5 to 95% (noncondensing)
20mS
LED On = Activated
3.88˝ x 2.76˝ x 0.78˝
14-22 AWG wire
UL Listed, UL916, C-UL
Yes
ARL1C
ADIN35, ADIN35ES
C NC NO
RIBRL1S
DIN Mount Relay 10 Amp SPDT + Override
10-30 Vac/dc Coil
Override
Switch
PWR CTRL COM
Relay LED
CLOSED
OPEN
AUTO
Apply Continuous Power(10-30Vac/dc)
to PWR and COM.
Apply Coil Control(10-30Vac/dc)
to CTRL and COM.
Not Used
Open Lid this SideOpen Lid this Side
Contact Ratings:
10 Amp Resistive @ 277 Vac
10 Amp Resistive @ 28 Vdc
480 VA Pilot Duty @ 240/277 Vac
480 VA Ballast @ 277 Vac
Not rated for Electronic Ballast
600 Watt Tungsten @ 120 Vac (N/O)
240 Watt Tungsten @ 120 Vac (N/C)
1/3 HP @ 120-240 Vac (N/O)
1/6 HP @ 120-240 Vac (N/C)
1/4 HP @ 277 Vac (N/O)
1/8 HP @ 277 Vac (N/C)
C NC NO
Made in USA
Meets
“Buy American”
of ARRA 2009
Models ADIN35 and ADIN35ES sold
separately. See data sheet on website
for more product information.
Coil Current:
33 mA @ 10 Vac
35 mA @ 12 Vac
46 mA @ 24 Vac
55 mA @ 30 Vac
13 mA @ 10 Vdc
15 mA @ 12 Vdc
18 mA @ 24 Vdc
20 mA @ 30 Vdc
Power and Control Voltage:
10-30 Vac/dc ; 50-60 Hz
Drop Out = 2.1 Vac / 2.8 Vdc
Pull In = 9 Vac / 10 Vdc
ADIN35
DIN Rail Perforated
35mm x 7.5mm x 1m
ADIN35ES
Pair of End Stops
for 35mm DIN Rail
091918
Loading...