SCROLL SAW 90W
SSM4002
Original Instructions
EN
2
Fig. A
Fig. B
EN
3
Fig. C
Fig. E
Fig. D
EN
4
Fig. F
Fig. H
Fig. G
EN
5
SCROLL SAW MACHINE FFZ-400R
Thank you for buying this Rhyas product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Rhyas are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions
carefully before using this device.
Familiarise yourself with its functions
and basic operation. Service the device
as per the instructions to ensure that it
always functions properly. The
operating instructions and the
accompanying documentation must be
kept in the vicinity of the device.
Introduction
This scroll saw is great for making toys, puzzles,
games, fretwork and jewelry. Because of its
cutting capacity it is a handy do-it-yourself tool. It
cuts wood up to 40 mm thick as well as plastics
and non-ferrous metals.
Contents
1. Machine data
2. Safety instruction
3. Installing accesoires
4. Operation
5. Maintenance
1. MACHINE DATA
Technical data
Voltage 230 V~
Frequency 50 Hz
Power consumption 90 W
Speed count w/o load/min 1440/min.
Max saw depth 90° 40 mm
Max saw depth 45° 10 mm
Weight 12.5 kg
Lpa (sound pressure) w/load 73 dB(A)
Lpa (sound pressure) w/o load 86 dB(A)
Contents of the package
1 Scroll saw
1 Protective cover
2 Screw for installing the protective cover
10 Saw blades
2 Adapters for universal saw blades
2 Allen key
1 Dust blow pipe
3 Rubber feet
3 Screws with nuts and rings for installing the
rubber feet
1 Cross guide
1 Operating manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig.A
1. On/off switch
2. Locking nut
3. Cross guide
4. Saw blade holder
5. Protective cover
6. Spanner
7. Dust blow pipe
8. Rubber feet
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss
of life or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Wear ear and eye protection
Specific safety instructions
• Wear safety goggles and a dust mask.
• This scroll saw machine is for indoor use only.
• Ensure that the teeth of the saw point
downwards prior to using the machine.
• If teeth of the saw blade are missing or
are damaged, then the saw blade must be
EN
6
replaced immediately.
• Use the scroll saw machine on a stable and flat
surface.
• Never exert pressure on the sides of the saw
blade because it may break.
• Check wooden work pieces for possible
protruding nails etc. and remove these.
• Do not touch the sawing surface with your
hands.
• Never leave the sawing machine unattended
while it is running.
• Do not remove any wood debris etc, in the
vicinity of the saw with your hands while it is
running. Turn the machine off before removing
the wood debris.
Immediately switch off the machine when
• Interruption in the mains plug, mains lead or
mains lead damage.
• Defect switch.
• Smoke or stench of scorched isolation.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply
corresponds to the voltage on the
rating plate.
Mains connection
Only use earthed sockets with earthing wire
connected per the regulations.
Replacing the mains connection cable
The mains connection cable may only be replaced
by a special cable in a specialised workshop.
Replacing cables or plugs
Dispose of old cables or plugs immediately after
replacing them. It is dangerous to connect the
plug of a loose cable to a wall socket.
Using extension cables
Only use an approved extension cable,
corresponding to the machine power use. The
wires must have a minimum cross section of 1.5
mm2. If the cable is on a reel, it must be fully paid
out.
3. INSTALLING ACCESSORIES
Always disconnect the machine from
the main power supply before
carrying out any maintenance work
Installing the protective cover
Fig.B
• Before commissioning the machine, the
protective cover (5) must be installed.
• Insert the screw from the inside left, then
affix the washer and the safety ring from the
right side. The safety ring (A) may be left out
optionally.
• Screw the knurled nut in tight.
Installing the cross guide
Fig.C
The cross guide (3) allows material to be bevelled,
and can be simultaneously used to support the
material as it is fed through the saw.
Mounting the rubber feet
Fig. G
The enclosed rubber feet contribute to a steady
position of the scroll saw on your worktable
• Place the rubber foot on its place
• Connect the rubber foot with help of the
enclosed bolt, ring and nut
• Tighten the nut with a wrench
Sawdust blower
Fig. H
The sawdust blower keeps the workpiece clean
for more accurate scroll cuts. For best results,
always direct air flow from the blower tube at
blade and workpiece. To adjust, simply bend to
desired position.
Installation
• Place the sawdust blower on the hole on top of
the machine
• Turn the blow pipe clockwise into the hole
EN
7
4. OPERATION
Always observe the safety
instructions and obey the relevant
regulations.
Start - Push the green ON-switch to start the
machine
Stop - Push the red OFF-switch to stop the
machine
Tilting the table
Fig.D
The scroll saw table can be tilted through 45°. To
do so:
• Lock the locking arm underneath the table.
• Manually tilt the table until the desired angle
has been reached (see the graduated scale on
the machine).
• Retighten the locking arm.
Adapters for universal saw blades
Fig. F
The enclosed adapters should only be used with
universal (= without pins on the end) saw blades
• Unscrew the Allen screws on the adapter
counterclockwise
• Slide the universal saw into the gap between
the Allen screws
• Tighten the Allen screws clockwise so the saw
is clamped
• Install the saw blade (see INSTALLING THE
SAW BLADE)
Installing the saw blade
Fig.E
Always disconnect the machine from
the main power supply before
carrying out any maintenance work
Use universal saw blades from any
better DIY shop or machine shop.
• Select the correct blade for the kind of wood to
be cut.
• Push the spanner upwards. (6).
• Push the saw blade through the slot, with the
teeth pointing downwards. Make sure that the
bolt of the saw blade (or saw-blade adapter)
slides into the lower saw blade holder.
• Pull the saw blade up, so that the upper bolt
(or saw-blade adapter) slides into the upper
holder.
• Tighten the tensioner button until the saw
blade has the required tension.
• Remove all tools and other objects from the
saw table. Activate the current and allow the
saw blade to run before starting to saw. The
saw blade should run quietly.
Removing the saw blade
Always disconnect the machine from
the mains before carrying out any
maintenance work.
• Loosen the spanner until the spring is slack.
• Carefully push down the upper saw-blade
holder and slightly lift the blade in order to
facilitate its removal.
• Allow the blade to drop down slightly and push
it forward, in order to loosen it from the lower
holder.
Basic scroll saw operations and tips
• There is a learning curve for each person who
wants to use this saw. During that period of
time it is expected that some blades will break
until you learn how to use the saw and receive
the greatest benefit from the blades.
• Blades wear faster when:
• cutting plywood, which is very abrasive;
• when sawing wood which is thicker than the
blade stroke;
• when sawing hardwood;
• when side pressure is placed on the blade
The saw blade saws only during the downward
stroke.
• Using both hands, slowly and with minimum
pressure push the workpiece across the table
towards the saw blade. This will prevent the
blade from breaking or twisting.
• For optimal results, the saw blade must be
sharp.
• Use the proper saw blade. The selection of the
saw-blade depends on the thickness of the
wood and the cut you would like to achieve.
Keep the following in mind as a general rule:
The thinner and harder the wood, the finer the
teeth of the saw blade. Use a small blade to
saw sharp curves.
EN
8
5. MAINTENANCE
Always disconnect the machine from
the mains before carrying out any
maintenance work.
The machine is designed to function faultlessly for
a long period and with a minimum of maintenance.
Extend its lifespan by regularly cleaning the
machine and treating it correctly.
Cleaning
Regularly clean the machine with a soft cloth,
preferably after each use. Keep the ventilator
slot free of dust and other deposits. Remove any
tenacious deposits with a soft cloth moistened
with soap. Do not use solvents (petrol, alcohol,
ammonia, etc.) as they will damage the plastic
parts.
Lubrication
The machine does not need lubricating.
Faults
If a fault arises (due to e.g. element wear), contact
the service address listed on the warranty card.
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Damaged and/or disposed of
electrical or electronic devices must
be dropped off at recycling stations
intended for that purpose.
Warranty
Read the warranty conditions on the separately
supplied warranty card.
EN
9
EN
10
Spare parts list SSM1005
No. Description Position
209882 Blade spanner 17 - 20
209865 Sawblade holder (upper) 28
209866 Connection plate + bearing 33+34
209867 Lower arm 39
209868 Sawblade holder (lower) 41
209883 Blowpipe complete 42 - 44
209884 Protection cover 47
209885 Air cell 49
209886 Knob 51
209872 Cam 52
209876 Mitre guide complete 68 - 71
EN
11
80
81
Artikel : SSM 1005
Model : FFZ-400R
Versie : 050105-2
EN
12
GENERAL SAFETY INSTRUCTIONS
Warning!
Read all instructions. Failure to follow all instruc tions listed
below may result in electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool. Save these instructions.
1) Work area
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive atmos pheres,
such as in the presence of flam mable liquids, gasses
or dust. Power tools cre ate sparks which may ignite the
dust of fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs which
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of elec tric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use redu ces the risk of electric shock. Always
use tool in con junction with a residual circuit breaker
device.
3) Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medi ca tion. A moment of inattention while
opera ting power tools may result in serious personal
injury.
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the off
position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better con trol of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewel lery or long hair can be
caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
h. Use clamps or a vice to hold work. It’s safer than using
your hand and it frees both hands to operate tool.
4) Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalign ment or binding
of moving parts, breakage of parts and any other
condition that may affect the po wer tools operation.
If dama ged, have the po wer tool repaired before use.
Many acci dents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in hazardous situation.
(EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU
of the European parliament and of the council of 9 June on the restriction of the use of certain
hazardous substances in electrical and electronic equipment is in conformity and accordance with the
following standards and regulations:
EN
13
EN 55014-1, EN 55014-2-16, EN 51044-1, EN 50144-2,
EN 61000-3-2, EN 61000-3-3
2006/42/EC, 2006/95/EC, 2004/108/EC, 2002/96/EC, 2006/95/EC
Zwolle, 01-05-2014 W. Dekens
CEO Mactool Industrial BV
It is our policy to continuously improve our products and we therefore reserve the right to change the product specification
without prior notice.
Mactool Industrial BV • Lingenstraat 6 • 8028 PM • Zwolle The Netherlands
DECLARATION OF CONFORMITY
SSM4002
h. Damaged switches must be replaced at a cus to mer
service repair centre. Do not use power tools that
cannot be switched on and off.
i. Do not leave power tools unattended while they are
switched on. Always switch off the tool and wait until it
has come to a full standstill before leaving.
j. If the mains cable has been damaged, it must be
replaced with a special mains cable. These can be
obtained from the manufacturer or the manufacturer’s
custo mer service department. The mains cable
may only be replaced by the manufacturer, the
manufacturer’s customer service department or equally
qualified persons.
5) Battery tool use and care
a. Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
c. Use power tools only with specifically desig nated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
d. When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns of a fire.
e. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritations or burns.
6) Service
a. Please use a qualified expert who uses original
replacement parts to repair your power tool. This will
ensure proper functioning of the power tool.
b. Caution! The use of any accessories or additional tools
other than those recommended in this manual may
lead to an increased risk of injury. Only use original
replacement parts.
1405-02
Loading...