RHINO RAv2, RES4601a Instruction Manual

1
RES4601a
RES4601aRES4601a
RES4601a
A U S T R A L I A N S T A N D A R D S A P P R O V E D R EM O TE CO N TR OL E N G I N E I M M O B I L I S E R AN D A L A R M .
This product complies with AS/NZS 3749.1 2003 Class A. Volumetric Sensing must be enabled to comply with a Class A installation (refer ‘feature programming’).
Class A VSAS (Vehicle security alarm system) includes control equipment including setting and unsetting facilities, all sensors, warning devices and provisions for immobilization of the vehicle and the volumetric sensing device (glass break/shock).
This product complies with AS/NZS 3749.1 2003 Class B. Volumetric Sensing must remain disabled to comply with a Class B installation (refer ‘feature programming’).
Class B VSAS (Vehicle security alarm system) includes control equipment including setting and unsetting facilities, all sensors, warning devices and provisions for immobilization of the vehicle.
This product complies with AS/NZS 4601:1999/Amdt 1: 2003
This product is to be installed in accordance with the methods & principles detailed in AS 3749.2:1997
Instruction Manual
RAv2 031106.doc
Thank you for purchasing a Rhino Engine Immobiliser. Please read this manual carefully
before commencing installation and keep it in a safe place for future reference.
Has your insurer specified fitting a
“RES2001”?
For details, please
refer to page 12
N517
Proudly D
esigned
in Australia
2
Contents
Contents ................................................................................................................................................................................................ 2
Features................................................................................................................................................................................................. 3
Standard System Features ..............................................................................................................................................3
Selectable System Features (These features can be turned on and off)........................................................................3
Optional Accessories .......................................................................................................................................................3
Detailed Feature Descriptions ............................................................................................................................................................... 4
Auto Immobilise ...............................................................................................................................................................4
Automatic re-arm & relock (Programmable)....................................................................................................................4
Door Ajar Warning (Programmable) ................................................................................................................................4
Timed Headlight Delay (Optional connection by installer at extra cost) ..........................................................................4
Perimeter Night Light (Programmable)............................................................................................................................4
Dome Light Extension (Programmable) ..........................................................................................................................4
Glass Break Sensor.........................................................................................................................................................4
Door Lock On Ignition (Programmable)...........................................................................................................................5
Pre-Alert (2 Stage) Car Body Impact Warning with ETS™ .............................................................................................5
Auto Bypass.....................................................................................................................................................................5
Operation .............................................................................................................................................................................................. 6
Remote Control Functions .................................................................................................................................................................... 6
Operation .............................................................................................................................................................................................. 6
Your Remote Control .......................................................................................................................................................6
Arming and Disarming Your Immobiliser .........................................................................................................................7
Activate Panic or Car Finder Function .............................................................................................................................7
Remote Boot Release......................................................................................................................................................7
Programming Additional Remote Controls / Erasing Lost Remote Controls...................................................................7
Overriding the Immobiliser................................................................................................................................................................... 8
Programming......................................................................................................................................................................................... 8
How to Program the Selectable Features .......................................................................................................................8
How to Change REGISTER 1: ........................................................................................................................................9
How to Change REGISTER 2: ......................................................................................................................................11
Installation .......................................................................................................................................................................................... 12
“RES2001” Insurance Requirements.............................................................................................................................12
Installing the Main Control Unit......................................................................................................................................12
Internal Connector Diagram ..........................................................................................................................................12
Installing the BBSC siren ...............................................................................................................................................15
Connecting To An Existing Electric Boot Release Motor ..............................................................................................15
Installing Additional Sirens ............................................................................................................................................15
Installing Timed Headlight Delay ...................................................................................................................................15
Connecting Your System To Central Locking ...............................................................................................................16
WARRANTY TERMS & CONDITIONS .........................................................................................................................19
3
Features
Standard System Features
Microprocessor Controlled
Three Point Engine Immobilisation (Onboard Relays)
Auto Immobilise (Passive Arming)
Code Hopping Remote Technology (Anti-Scanning, Anti-Code Grabbing)
Two SSR™ Solid State Remote Controls with 4 Function Operation (Arm / Disarm, Boot Release, Panic & LED
Torch)
Long Life Lithium Cell Remote Control Batteries (Each Remote Uses 2 x CR2025)
Automatic Re-arm in case of Accidental Disarm
Ultra-Bright Red Flashing LED Light
Visual Arming and Disarming via Indicators (1 Flash For On, 2 Flashes For Off)
Safety Circuit Prevents Arming While Ignition On
Learning Mode for Adding Additional Remote Controls (maximum of 5)
Negative On Alarm Output for Optional Internal Cabin Siren
Onboard Central Locking Relay Outputs
All points of entry alarm protection (doors, boot, bonnet)
Personal panic button via remote control (siren sounds & indicators flash)
Auto Bypass (prevents false alarms caused by faulty sensors / or switches)
Selectable System Features (These features can be turned on and off).
Arm / disarm beeps (if optional siren fitted)
Door ajar warning (indicators flash & siren (if fitted) beeps for 3 seconds if a door is left ajar i.e. Vehicle’s interior
light circuit sees door in open position)
Electric boot release output via remote control – no delay (standard feature is to hold button for 3 seconds)
Timed headlight delay (optional feature at additional installation cost)
Multiple vehicle remote control (control 2 cars separately from the 1 remote)
Central closure (allows electric window / sunroof closure on arming of some vehicles)
Door lock on ignition (anti hi-jack)
Perimeter night light (indicators hold on for 20 seconds on disarm)
Dome Light Extension (interior light turns on for 20 seconds on disarm)
User programmable override code in case of loss or damage of remotes (over 63,000 possible codes)
Compatible with Transformer interface for vehicles with factory keyless entry systems. Allows for factory remote
controls to arm/disarm the system.
Compatible with Wireless Keypad to allow arm/disarm of the system without remote controls.
In-built 2 stage pre-alert car body impact sensor with ETS
Audio discriminating glass break sensor
Alarm memory (allows recall of the10 most recent alarm activations in order)
Optional Accessories
Internal Cabin Siren (Part No: DPS)
Ultrasonic Sensors (Part No: UD6)
Microwave Sensor (Part No: UD5)
Electronic Tilt Sensor (Part No: TILTSENSE2)
Paging System (Part No: APAGER)
Transformer Interface (Part No: TRANS TX)
Wireless Keypad (Part No: WKPB)
4
Detailed Feature Descriptions
Auto Immobilise
The immobiliser will always automatically activate 38 seconds after the ignition is turned off no matter what. The dash mounted LED will come on constantly to confirm the system has entered auto immobilise mode. The vehicle cannot be started now unless the remote is pressed first. When disarming, if you do not switch the ignition on within 38 seconds, the immobiliser will also enter auto immobilise mode again. If you take longer than 38 seconds to exit your car & press the remote thinking you are locking it, in fact you will actually be just turning the immobiliser off temporarily & leaving your car unlocked. You must in this instance press your remote a second time to lock your vehicle.
Automatic re-arm & relock (Programmable)
This feature prevents accidental disarming by the owner i.e. the owner turns the immobiliser off but is then distracted and forgets that they have deactivated the system. If a door is not opened or ignition turned on within 60 seconds from when the system is turned off by the remote, the system will fully re-arm & re-lock the vehicle. Note: The immobiliser will enter auto immobilise mode after 38 seconds (the LED will come on constantly to indicate the vehicle is immobilised). At the 60-second mark, the system will fully arm & the doors will lock – the blinkers will flash once & the siren will beep once & the LED will start flashing.
Door Ajar Warning (Programmable)
If the vehicles doors are not properly closed when you try to activate your immobiliser system, the indicators will flash and the siren will beep for 3 seconds to alert you that the vehicle is not secure.
Timed Headlight Delay (Optional connection by installer at extra cost)
You can have your car headlights turn on automatically for 15 seconds when you arm the immobiliser by remote control. This may allow you for instance to see your way to your front door, or out of a dark car park. You can turn the lights off before the 15-second period ends by pressing the left button on your remote.
Perimeter Night Light (Programmable)
When this feature is on, the indicators will stay on constantly for 20 seconds on disarm, or until the ignition is turned on. This allows for illumination around the vehicle at night.
Dome Light Extension (Programmable)
The dome (interior) light comes on automatically when the system is disarmed via remote, enabling the owner to verify the vehicle is safe inside. The light stays on for 20 seconds, or until the ignition is turned on. The dome (interior) light also comes on automatically when the ignition is turned off, enabling the owner to quickly gather belongings before exiting the car. The light stays on for 20 seconds, or until the system is armed via remote, or until the ignition is turned on again. NOTE: If you activate the Automatic Rearm & Relock Feature, this feature will be disabled.
Glass Break Sensor
The RES4601A with the addition of a special cabin microphone incorporates intelligent glass break sensing circuitry. This inbuilt device will trigger the alarm system, provided it registers the correct sound frequency parameters for breaking glass & that the impact sensor also registers a corresponding vibration to the vehicle. This ensures accurate detection of glass breakage.
5
Door Lock On Ignition (Programmable)
If you have central locking connected, when this feature is on the doors will lock when the ignition is turned to on, and unlock when the ignition is turned to off. This is to prevent anyone but occupants in the vehicle from being able to open the doors.
Pre-Alert (2 Stage) Car Body Impact Warning with ETS™
This special feature provides a two-stage impact sensing system. It gives the security conscious owner a sensitive car body impact sensor that will give a potential thief prior warning that the vehicle is protected by this most formidable alarm system. On detection of a low level impact i.e. from a tyre kick, the siren will simply beep for a few seconds to warn away the would-be thief. If the vehicle is attacked any further, the system will move into full siren mode. The unique ETS™ Environment Tuned Sensor is able to distinguish between environmental shocks caused by aircraft, trucks, or extreme weather conditions, and the impact caused by any thief attempting to break in or other heavy impacts. Furthermore the system features the unique Rhino "Auto Adjust” process, where during the 45 sec. arming delay, the alarm samples the background noise where the vehicle is parked, and will if necessary automatically reduce the sensitivity of the impact sensor to an appropriate level. This process allows a trouble free sensitivity that ordinary alarms simply cannot provide. The sensitivity level reference point can be adjusted to suit your particular needs. Please refer to the programming section contained later in this manual.
Auto Bypass
Auto bypass is designed to reduce false alarms caused by faulty switches or external sensors. If the alarm is triggered 3 times by the same sector then the particular sector will be bypassed. (i.e. the sector will become inactive.) The sector will only be bypassed for one arming period. The next time the system is armed the sector that was bypassed will become active again.
6
Operation
Remote Control Functions
TOP
BUTTON
Operation
Your Remote Control
CENTRE
BUTTON
Press and hol
d for 3
seconds to activate the
boot release feature.
Press to activate panic
feature, press again to
cancel.
LEFT BUTTON
RIGHT BUTTON
Press to
Arm and
Disarm.
Press for
high
intensity
LED torch.
Loading...
+ 14 hidden pages