Rheem X-13 Specification
Rheem Air Handler
FORM NO. H11-545
RHBL- Series
X-13 (ECM) Motor
Efficiencies up to 16 SEER
RHAL- Series
PSC Motor
Efficiencies up to 14.5 SEER
• Front or Bottom Return
• Flow Check Piston for cooling or heat pump operation
• Wall-hanging brackets
• Built in Filter Rack
• Suitable for R-410A or R-22 Refrigerants (RHAL Only)
• AHRI Certified
• UL Certified
• Molex Plug Connections for field installed heater kits
• Dual Voltage Direct Drive Blower with multi-speed motor
• Thermoplastic Drain Pan with bottom primary and secondary
connections
• Optional Decorative Grill for front return applications
• Optional Factory Installed Condensate Float Switch which
shuts off the outdoor unit in event the condensate pan
becomes clogged
Air
Air Handlers
RHBL/RHAL Series
Air
Table of Contents
RHBL/RHAL Series
2
TABLE OF CONTENTS
Engineering Features ......................................................................................3
Model Number Identification ............................................................................4
Dimensional Data ........................................................................................5-6
Airflow Performance Data ............................................................................7-9
Piston Sizing Chart........................................................................................10
Electrical Data ..............................................................................................11
Accessories ............................................................................................................12
Limited Warranty ..........................................................................................13
Air
Engineering Features
RHBL/RHAL Series
3
Engineering Features
RHBL/RHAL- Series
• The most compact unit design available, all standard heat air
handler models only 36" [915 mm].
• Rugged wall steel cabinet construction, designed for added
strength and versatility.
• 1.0" foil faced insulation for excellent thermal and sound
performance.
• Four leg blower motor mount.
• Traditional open wire element design for heat applications.
• Indoor coil design provides low air side pressure drop, high
performance and extremely compact size.
[ ] Designates Metric Conversions
• Coils are constructed of aluminum fins and internally grooved
copper tubing.
• Molded polymer corrosion resistant condensate drain pan is
provided for all indoor coils.
• Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside
of the air handler cabinet.
• Concentric knockouts are provided for power connection to
cabinet. Installer may pull desired hole size up to 1
3
/8 inch
inches [35 mm] for
7
/8 inch [22 mm] conduit.
Air
Model Number Identification
RHBL/RHAL Series
4
Model Number Identification
R H A L — FR 24 P J N 00 A 000
Options
417 = Float Switch
Design Variation
Electric Heat
00 = NO HEAT
03 = 3 kW
05 = 5 kW
08 = 8 kW
10 = 10 kW
Disconnect Configuration
N = None
B = Breaker
Voltage
J = 208/240/1/60
Metering
P = Piston (R22 or R410A)
T = TXV (R410A)
Capacity
18 = 18,000 BTU/H [5.30 kW]
24 = 24,000 BTU/H [7.03 kW]
30 = 30,000 BTU/H [8.80 kW]
36 = 36,000 BTU/H [10.6 kW]
FR = Front Return
Refrigerant
L = 410A
Front Return/Wall Mount
A = PSC Motor –
Standard Efficiency
Classification
H = Air Handler
Rheem
Available Models at J Voltage
RHAL-FR18PJ
RHAL-FR24PJ
RHAL-FR30PJ
RHAL-FR36PJ
RHAL-FR36TJ
RHBL-FR24TJ
RHBL-FR36TJ
• Supply circuit protective devices may be fuses or
“HACR” type circuit breakers.
• Largest motor load is included in single circuit.
• If non-standard fuse size is specified, use the next
larger fuse size.
• J Voltage (230V) single-phase air handler is
designed to be used with single or three phase 230
volt power. In the case of connecting 3-phase
power to the air handler terminal block, bring only
two leads to the terminal block. Cap, insulate and
fully secure the third lead.
• The air handlers are shipped from the factory with
the proper indoor coil installed, and cannot be
ordered without a coil.
R H B L — FR 24 T J N 00 A 000
Options
417 = Float Switch
Design Variation
Electric Heat
00 = NO HEAT
03 = 3 kW
05 = 5 kW
08 = 8 kW
10 = 10 kW
Disconnect Configuration
N = None
B = Breaker
Voltage
J = 208/240/1/60
Metering
T = TXV (R410A only)
Capacity
24 = 24,000 BTU/H [7.03 kW]
36 = 36,000 BTU/H [10.6 kW]
FR = Front Return
Refrigerant
L = 410A
Front Return/Wall Mount
B = X13 (ECM) Motor – High Efficiency
Classification
H = Air Handler
Rheem
[ ] Designates Metric Conversions
Air
Dimensional Data
RHBL/RHAL Series
5
Unit Dimensions
Dimensional Data
RHAL-18 20 [508] 600 [283] — 80 [36] / 90 [41]
RHAL-24 20 [508] 800 [378] — 80 [36] / 90 [41]
RHAL-30 23 [584.2] 1000 [472] — 95 [43] / 105 [48]
RHBL-24 20 [508] 600 [283] 800 [378] 95 [43] / 105 [48]
RHBL-36 23 [584.2] 1000 [472] 1200 [566] 95 [43] / 105 [48]
241/2 [609.6]
211/2 [546.1]
211/2 [546.1]
241/2 [609.6]
211/2 [546.1]
36 [914.4]
36 [914.4]
36 [914.4]
36 [914.4]
36 [914.4]
241/2 [609.6] 36 [914.4]RHAL-36 23 [584.2] 1200 [566] — 95 [43] / 105 [48]
21 [533.4]
17 [431.8]
17 [431.8]
21 [533.4]
17 [431.8]
21 [533.4]
213/88 [542.9]
177/16 [442.9]
213/88 [542.9]
177/16 [442.9]
213/88 [542.9]
177/16 [442.9]
Model
(C) Unit
Depth
In. [mm]
(D) Return
Air Opening
Width
In. [mm]
Air Flow
CFM (Nom.) [L/s]
Unit Weight/
Shipping Weight (Lbs.) [kg]
(A) Unit
Width
In. [mm]
(B) Unit
Height
In. [mm]
Low High
(E) Return
Air Opening
Height
In. [mm]
Unit Dimensions & Weights
[ ] Designates Metric Conversions
Loading...