Rheem Value Series
Upflow/Horizontal Gas Furnace
FORM NO. G11-520 REV. 1
RGPS- Series
80% A.F.U.E.†
Input Rates 50-150 kBTU
• The Rheem Value Series line of upflow/horizontal gas
furnaces are designed for utility rooms, closets, alcoves,
or attics. Because of the model’s low-profile 34 inch
[864 mm] height, the upflow model can also be used to
satisfy most applications that traditionally call for a
horizontal furnace.
• The design is certified by CSA International.
• Unique solid door design leads to quiet operation.
• Patented heat exchanger, constructed of aluminized steel for the
maximum in corrosion resistance and thermal fatigue reliability.
• Low profile “34 inch” [864 mm] design is lighter and easier to
handle, and leaves room for optional equipment.
• Convertible from upflow to horizontal left or right without field
conversion.
• Left or right side gas and electric inlet connections allow
quick and simple change.
• Direct spark ignition with remote sense, features a integrated
board with an electronic air cleaner hookup.
• Prepaint galvanized steel cabinet.
• A slow-open gas valve and a specially designed draft inducer
motor make it one of the quietest furnaces on the market
today.
• Grab-holes in doors to aid in easy door removal and
replacement.
• A variety of cooling coils and plenums designed to use with
Rheem Value Series gas furnaces are available as optional
accessories.
Air
Gas Furnaces
RGPS Series
Annual Fuel Utilization Efficiency -
AFUE
THIS MODEL
97%78%
HIGH
MID
82% 88%
80.0%
✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
ENER UIDE
Air
Table of Contents
RGPS Series
2
TABLE OF CONTENTS
Standard & Optional Equipment ......................................................................3
Model Features/Physical Data & Specifications..................................................4
Model Number Identification ............................................................................5
Dimensional Data ........................................................................................6-7
Blower Performance Data ................................................................................8
Accessories....................................................................................................9
Limited Warranty ..........................................................................................10
Air
Standard & Optional Equipment
RGPS Series
3
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
DIRECT SPARK IGNITOR
IN-SHOT BURNERS
DRAFT INDUCER MOTOR
PATENTED HEAT EXCHANGER
INTEGRATED
FURNACE
CONTROL
STANDARD EQUIPMENT
Completely assembled and wired; induced draft; pressure switch;
redundant main gas control; blower compartment door safety switch;
solid state time on/time off blower control; limit control; manual shutoff valve, pressure regulator for natural and L.P. (propane) gas;
transformer; direct drive multi-speed blower motor. Furnaces are
equipped with cooling/heating relay and transformer (40VA) ready for
air conditioning applications. (Please note: a thermostat is not
included as standard equipment.) Flame sensor diagnostics.
OPTIONAL EQUIPMENT
Twinning Kit
Side and bottom filter frame assembly. Return air cabinet for all sizes.
NOTE: Furnace is not listed for use with fuels other than natural or L.P.
(propane) gas.
The complete terms of limited and other warranties are available at our
sales office, or through local installer.
All models can be converted by a qualified Rheem distributor or local
service dealer to use L.P. (propane) gas without changing burners.
Factory approved kits must be used to convert from natural to L.P.
(propane) gas and may be ordered as optional accessories from a
Rheem parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
NOTE: For natural and L.P. (propane) gas models, standard hot surface
ignition is 100% safety lockout type.
Air
Model Features/Physical Data & Specifications
RGPS Series
4
Physical Data and Specifications
NOTES: All models are 115V, 60HZ, 1 Ph. Gas connection size for all models is 1/2" [12 mm] N.P.T.
➀ In accordance with D.O.E. test procedures.
➁ See Conversion Kit Index Form for high altitude derate.
[ ] Designates Metric Conversions
• The design is certified by CSA International.
• Unique solid door design leads to quiet operation.
• Patented heat exchanger, constructed of aluminized steel for the
maximum in corrosion resistance and thermal fatigue reliability.
• Low profile “34 inch” [864 mm] design is lighter and easier to
handle, and leaves room for optional equipment.
• Convertible from upflow to horizontal left or right without field
conversion.
• Left or right side gas and electric inlet connections allow
quick and simple change.
• Direct spark ignition with remote sense, features a integrated
board with an electronic air cleaner hookup.
• Prepaint galvanized steel cabinet.
• A slow-open gas valve and a specially designed draft inducer
motor make it one of the quietest furnaces on the market
today.
• Grab-holes in doors to aid in easy door removal and
replacement.
Model Features
MODEL NUMBERS
RGPS- SERIES
Input-BTU/Hr [kW] ➁
Heating Capacity BTU/Hr [kW] ➀
Heat Ext. Static Pressure [kPa] .10 [.025] .12 [.029] .12 [.029] .15 [.037] .15 [.037] .15 [.037] .20 [.05] .20 [.05]
Blower (D x W) [mm]
Motor H.P.–Speed–
PSC Type [W]
Motor Full Load Amps 6.8 5.8 7.9 7.1 7.9 9.5 9.5 9.5
Heating Speed Med-Low Med Med Med Med Low Low Low
Cooling Speed High High High High High Med Med Med
Cooling CFM @ .5" E.S.P.
(Nominal) [L/s]
Max. E.S.P. (In. W.C.) [kPa] 0.5 [.12] 0.5 [.12] 0.5 [.12] 0.5 [.12] 0.5 [.12] 0.5 [.12] 0.5 [.12] 0.5 [.12]
Temperature Rise Range °F
[°C]
Max. Outlet Air Temp. °F
[°C]
Approx. Shipping Weight (Lbs.)
[kg]
Standard Filter (In.)
[mm]
Return Air Cabinets
(Opt.) RXGRFilter Size [mm]
AFUE–H.S.I. Models ➀
05EAUER
05NAUER
50,000 [15] 75,000 [22] 75,000 [22] 100,000 [29] 100,000 [29] 100,000 [29] 125,000 [37] 150,000 [44]
41,000 [12] 60,000 [18] 60,000 [18] 80,000 [23] 80,000 [23] 80,000 [23] 99,000 [29] 119,000 [35]
11 x 6
[279 x 152]
1
/2-4-PSC
[373]
1200
[566]
25-55
[13.9-30.6]
155
[68.3]
85
[39]
153/4 x 25
[400 x 635]
C14B
(2) 12 x 16
[305 x 406]
80.0% 80.0% 80.0% 80.0% 80.0% 80.0% 80.0% 80.0%
07EAMER
07NAMER
11 x 7
[279 x 178]
1
/2-3-PSC
[373]
1200
[566]
35-65
[19.4-36.1]
165
[73.8]
105
[48]
153/4 x 25
[400 x 635]
C17B
(2) 12 x 16
[305 x 406]
07EAMGR
07NAMGR
11 x 7
[279 x 178]
1
/2-3-PSC
[373]
1600
[755]
25-55
[13.9-30.6]
155
[68.3]
105
[48]
153/4 x 25
[400 x 635]
C17B
(2) 12 x 16
[305 x 406]
10EAMER 10EBRGR
11 x 7
[279 x 178]
1
/2-3-PSC
[373]
1200
[566]
45-75
[250-41.7]
190
[87.7]
115
[52]
153/4 x 25
[400 x 635]
C17B
(2) 12 x 16
[305 x 406]
11 x 10
[279 x 254]
1
/2-3-PSC
[373]
1845
[871]
30-60
[16.7-33.3]
170
[76.6]
120
[54]
191/4 x 25
[489 x 635]
C21B
(2) 20 x 16
[508 x 406]
10EBRJR
10NBRJR
11 x 10
[279 x 254]
3
/4-3-PSC
[560]
2060
[922]
30-60
[16.7-33.3]
170
[76.6]
120
[54]
191/4 x 25
[489 x 635]
C21B
(2) 20 x 16
[508 x 406]
12EARJR 15EARJR
11 x 10
[279 x 254]
3
/4-3-PSC
[560]
2115
[998]
35-65
[19.4-36.1]
180
[82.2]
140
[63]
223/4 x 25
[578 x 635]
C24B
(2) 24 x 16
[610 x 406]
11 x 10
[279 x 254]
3
/4-3-PSC
[560]
2080
[982]
50-80
[27.8-44.4]
190
[87.7]
150
[68]
223/4 x 25
[578 x 635]
C24B
(2) 24 x 16
[610 x 406]