Rheem Value Series 2-Stage Submittal Sheet
SUBMITTAL COVER SHEET
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A 01/12 QG FORM NO. M11-1640
PROJECT NAME
LOCATION
ARCHITECT
ENGINEER
CONTRACTOR
SUBMITTED BY DATE
UNIT SUMMARY
JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER UNIT MODEL NO.
SUBMITTED FOR APPROVAL RECORD COIL MODEL NO.
DATE AIR HANDLER MODEL NO.
SUBMITTAL SHEET FOR 16AJL SERIES
2 TO 5 NOMINAL TON [7.03 TO 17.6 kW], 16 SEER
AIR CONDITIONER
FORM NO. X33-1393
Supersedes Form No. X66-1317 Rev. 1
Low Pressure Control....................................................
High Pressure Control ........................................................
Low Ambient Control ..........................................................
Compressor Time Delay Control ........................................
Crankcase Heater ........................................................
Sound Enclosure ................................................................
ACCESSORIES
FEATURES FOR 16AJL SERIES
AIR CONDITIONERS
2 TO 5 NOMINAL TON [7.03 TO 17.6 kW]
• Painted louvered steel cabinet
• Easily accessible control box
• Grille/motor mount for quiet fan operation
• Condenser coils constructed with copper tubing and
enhanced aluminum fins (2-4 Tons)/MicroChannel (5 Ton)
• 10 easy-to-read diagnostic alert codes
• Filter Drier (shipped – not installed)
• Limited Warranty:
Conditional Compressor*
(Registration Required) ........................Ten (10) Years
Conditional Parts* (Registration Required) ..Ten (10) Years
*See Product Warranty Card for Details.
“Proper sizing and installation of equipment is critical to achieve
optimal performance. Ask your Contractor for details or visit
www.energystar.gov.”
UNIT DATA
COOLING PERFORMANCE
EFFICIENCY ................................
_______
SEER
TOTAL CAPACITY*..................
_______
MBH [kW]
SENSIBLE CAPACITY*............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
_______
°F [°C] WB
POWER INPUT REQUIREMENT ........
_______
kW
(*uses blower motor heat)
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ........
_______
kW
ELECTRICAL DATA
POWER SUPPLY ........................
___________Hz
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ..........
_______
AMPS
CLEARANCES
ACCESS SIDE 24" [609.6 mm]
AIR INLETS 6" [152.4 mm]
ABOVE UNIT 60" [1524 mm]
16.0
Loading...