How it Works
Rheem
Loading...
TANKLESS WATER HEATING
User Manual
28 pgs3.08 Mb0

Rheem TANKLESS WATER HEATING User Manual

Tankless Gas Water Heating
Replacement Parts and Accessories Catalog
TANKLESS WATER HEATING
PARTS & ACCESSORIES
2016 CATALOG
Ruud.com
Table Of Contentes
2
General Terms and Conditions
A comprehensive catalog of approved replacement parts
for Ruud® and Rheem
Freight Allowance
Please see the Tankless Parts and Accessories Price Sheet for Freight Allowances.
Taxes
Prices are subject to the addition of any tax imposed by any present or future Federal, State, County or Municipal law on the sale of such material, unless we have a tax exemption certificate on file.
Acceptance of Orders
All orders are subject to final approval on the terms and conditions contained in our standard customer acknowledgment form.
Materials Return
Saleable, current component parts in a new or unused condition must have prior authorization by the Parts Packaging Supervisor or Customer Service before being returned. Parts may only be considered for return within 90 days from the original invoice date. Invoice numbers must be provided to Customer Service prior to obtaining a return authorization number. All parts returned without prior authorization will be destroyed or sent back to the sender at their expense. All returns will be subject to our inspection and a 25% restocking charge. Returned parts that are damaged or in a condition that prevents resale will not be credited. Service/Warranty Parts returned in accordance with warranty claim provisions do not require prior authorization, but will be subject to our inspection. See Price Sheet for Additional Conditions.
®
tankless gas water heaters*.
Parts Warranty
All tankless service parts are warranted for the remainder of the parts warranty covering the product they are being used to service. If no warranty is remaining on said product then the warranty will be for a period of 90 days from the date of purchase. Contact Technical Service for warranty information.
Accessories Warranty
All tankless accessories are warranted for a period of 1 year from the date of original purchase unless covered by a manufacturers warranty. Contact Technical Service for warranty information.
* For Rheem, replace RUTG with RTG
for Ruud tankless water heaters | 3
Contact Information
CONTACT INFORMATION
Customer Service
800-621-5622
Product Information/Online Lookup ruudparts.com
Warranty
MyRuud.com Fax: 800.535.9538 Email: parts@rheem.com
Technical Service
866.720.2076 Email: techserv@rheem.com
To Place an Order
800.621.5622
Fax: 800.535.9538
Located in Randleman, North Carolina with a 185,000 sq. ft. distribution center,
the Replacement Parts Division provides products and services including
the support of new equipment sales by providing OEM replacement parts, and parts identification.
In addition, we sell and market aftermarket parts and products that are included in the installation,
maintenance and servicing of HVAC equipment,
water heaters and other residential power equipment.
4 | for Ruud tankless water heaters
Parts Kits
TANKLESS GAS WATER HEATER PARTS KITS
for Ruud Tankless Water Heaters
Ruud introduces the Tankless Gas Water Heater Service parts kits. These kits, designed with the contractor in mind, provide all the basic parts necessary for a complete repair of a Ruud tankless gas water heater.
PROTECH PD966349 - Mid-Efficiency direct vent models (RUTG-95DVL-1, RUTG-84DVL-1, RUTG-64DVL-1)
PROTECH PD966350 - Mid-Efficiency outdoor models (RUTG-95XL-1, RUTG-84XL-1, RUTG-64XL-1)
PROTECH PD966351 - Condensing models (RUTGH-95DVL-1, RUTGH-90DVL-1, RUTGH-84DVL-1)
(RUTGH-95XL-1, RUTGH-90XL-1, RUTGH-84XL-1)
These kits include 1 each of the following:
Control Board Thermistors Gas Valve Flame Rods Flame Rod Wires Ignitor Coil Ignitor Rod Gas Valve Assembly Gas Inlet Connector Blower Motor Water Control Valves Drain Plug Inlet Water Filter Screw Kit O-ring Kit Remote Control
PROTECH Kits for Older Models:
PROTECH PD966332 - Mid-Efficiency direct vent models (RUTG-95DVL, RUTG-84DVL, RUTG-64DVL)
PROTECH PD966333 - Mid-Efficiency outdoor models (RUTG-95XL, RUTG-84XL, RUTG-64XL)
PROTECH PD966334 - Condensing models (RUTGH-95DVL, RUTGH-90DVL, RUTGH-84DVL)
(RUTGH-95XL, RUTGH-90XL, RUTGH-84XL)
for Ruud tankless water heaters | 5
Tankless Accessories
Finish and Appearance
Cosmetic Pipe Covers
Pipe covers enhance an indoor or outdoor installation by concealing the piping beneath the water heater. It provides protection from tampering and weather conditions. These covers come in a grey finish to match the tankless heater.
Dimensions: Width and depth of the heater, all are 16-1/2” tall.
• RTG20227 (grey)
For the RUTGH-95DV, RUTGH-95X, RUTGH-90DV, RUTGH-90X, RUTGH-84DV, and RUTGH-84X models*
• RTG20217DVG (grey)
For the RUTG-95DV, RUTG-84DV, RUTG-64DV and RUTG-66DV models*
• RTG20217XG (grey)
For the RUTG-95X, RUTG-84X, RUTG-64X and RUTG-66X models*
*Kits also applicable to models with “-1”
Outdoor Recess Boxes
Recess boxes enhance an outdoor installation by protecting the tankless unit from damage and tampering. It also provides additional protection from extreme weather. These boxes come in a grey finish and can be painted by the customer.
• RTG20226
For the RUTGH-95, RUTGH-90 and RUTGH-84 X and XL models* Rough-in Dimensions: 46" High, 19-1/2" Wide, 9-1/2" Deep
• RTG20253 - Recess Box for Stucco Applications
For the RUTGH-84XL, RUTGH-90XL and RUTGH-95XL models* Rough-in Dimensions: 46" High, 19-1/2" Wide, 9-1/2" Deep
• RTG20218
For the RUTG-64, RUTG-84, and RUTG-95 X and XL models* Rough in Dimensions: 42" High, 14-1/2” Wide, 8-1/2" Deep
• RTG20238 - Retrofit Kit for 74X Recess Box
Allows an RUTG-95XL, RUTG-84XL, RUTG-64XL models*, to be installed in a first generation 74 Series Recess box without changing the box out. Kit includes 2 brackets, hardware, and instructions.
• RTG20243 (grey)
For the RUTG-95, RUTG-84, RUTG-64 DV and DVL models*
• RTG20248 - Recess Box for Stucco Applications
For the RUTG-64XL, RUTG-84XL, and RUTG-95XL models* Rough in Dimensions: 42" High, 14-1/2” Wide, 8-1/2" Deep
*Kits also applicable to models with “-1”
Maintenance and Service
Tankless Service Valves
Allow for easy maintenance and service, such as flushing, for your tankless water heater.
• RTG20220AB
Webstone service valves, clean brass for low lead code, includes relief valve
Tankless Flush Kit
Connects easily to tankless service valves. Allows for the flushing the heat exchanger with a cleaning solution such as white vinegar. Simple to use.
• RTG20124
Includes: 5-gallon bucket, submersible pump, and two hoses
Pressure Relief Valve
Provides protection against excessive water pressure for your tankless water heater.
• AP12993C
Watts pressure relief valve, Rated at 150psi – 3/4" threads
Remote Control Options
Tankless Remote Controls
Allow for easy temperature adjustment and maintenance information access. Connect up to 3 remote controls, one of each type, to your tankless system.
• RTG20006DW
UMC-117 Main Remote Control, Generic without branding
AllClear™ Water Treatment System
Combat hard water and scale build up
• RTG20251
AllClear™ Water Treatment System
• RTG20252
Replacement Cartridge
Maximum Comfort
Recirculation Pump Kit (Timer Based)
For use with RUTGH-84DVLN/XN-1, RUTGH-90DVLN/XN-1, RUTGH-95DVLN/XN-1, RUTG-64DVLN/XN-1, RUTG-84DVLN/XN-1
and RUTG-95DVLN/XN-1
• AP17920
Kit contains: valve, (2) Stainless steel flanges and flange gaskets, (4) 7/16"–14 Bolts and nuts, and (1) Installation instruction sheet
6 | for Ruud tankless water heaters
1) Taco® 0015 recirculation pump with internal check
• RTG20006DU
USC1-117 Bath Remote Control, Generic without branding
• RTG20006DV
USC2-117 Second Bath Remote Control, Generic without branding
• RTG20009-1
10-ft. Thermostat Wire, 1 pair 18AWG
Tankless Manifold Systems
EZ-Link™: Connect two tankless water heaters
EZ-Link™ Cable
Connect two tankless water heaters together in a manifold*** This will allow two heaters to communicate together and operate as a single unit. Perfect for when one tankless is just not enough.
†
• RTG20040
6-ft. Long Cable with Connectors, and Wire Support Clamps.
*** Only two units may be connected together with the EZ-Link™ cable. † Only Identical models: all RUTG-95, RUTG-84, RUTG-64, RUTGH-84,
RUTGH-90, and RUTGH-95 models can be used with the EZ-Link Cable.
™
EZ-Link
Cable
MIC-6 Manifold Controller System
Connect up to 6 tankless water heaters
MIC-6 Manifold Controller System
For the RUTGH-95, RUTGH-84, RUTGH-90, RUTG-95, RUTG-84, and RUTG-64 series models only. Connect up to 6 tankless water heaters together in a manifold. This kit mounts inside a single tankless unit and connects to up to 5 additional units for a total of 6.
Notice: This kit will not work on any model manufactured before Jan 2010.
• RTG20213A
Connect up to 6 tankless water heaters together in a manifold Includes (1) 1-ft. control cable, and (1) 6-ft. control cable. Additional Type Q cables are necessary and listed below.
Manifold Control Cables (Type Q)
One required for each tankless water heater installed in a manifold. Connects a single tankless water heater to the MIC-6.
Notice: These cables will not fit the MIC-185 System.
.
MIC-6 Kit
Enlarged
™
EZ-Link Cable Connector
• RTG20213B - MIC-Q-1 1-ft. Control Cable
• RTG20213C - MIC-Q-6 6-ft. Control Cable
• RTG20213D - MIC-Q-18 18-ft. Control Cable
MIC-185 Manifold Controller System
Connect up to 20 tankless water heaters
MIC-185 Manifold Controller System
• RTG20126A
Manifold and control up to 6 tankless models.* Includes installation cabinet for indoor
or outdoor applications.
MICS-180
MIC-185
* All RUTG-95, RUTG-84, RUTG-64, RUTGH-84, RUTGH-90 and RUTGH-95 models.
Commercial upgraded models will be limited to 185°F in a manifold system. Residential models are limited to 140°F.
** This card provides control cable connection points for 7 - 20 units in multi-unit manifold.
MICS-180 Manifold Controller Expansion Card
• RTG20126B
Add on to the MIC-185 for up to 20 units in total.** Installations of 7 to 20 units require this expansion card. Mounts inside the MIC-185 cabinet. Includes cables
to connect to the MIC-185 board.
Replacement Manifold Control Board
• RTG20126W - MIC-185 Board
Replacement board for the MIC-180 or MIC-185.
MIC-6
Installed
Manifold Control Cables (Type K)
One required for each tankless water heater installed in a manifold. Connects a single tankless water heater to the MIC-180.
Notice: These cables will not fit the MIC-6.
• RTG20126C - MIC-K-16
16-ft. Control Cable
• RTG20126D - MIC-K-32
32-ft. Control Cable
• RTG20126E - MIC-K-65
65-ft. Control Cable
for Ruud tankless water heaters | 7
Tankless Venting
PVC Termination Kits
for RUTGH-84DV, RUTGH-90DV and RUTGH-95DV
Horizontal Vent Termination
• SP20286 for 3” PVC PTX-129
• SP20285 for 2” PVC RXGY-G02
11-3/4” Wide, 8” Tall, 2-1/2” Deep Fits PVC, ABS piping. Offers a clean in­stallation of the intake and exhaust pipes of the condensing tankless water heater.
Exhaust Intake
Horizontal or Vertical Concentric Vent Termination
• SP20245 for 3” PVC RXGY-E03A
39” Long, 7-1/4” Diameter, 4-1/2” opening required. Fits PVC, ABS piping. Offers a clean installation by combining the intake and exhaust pipes of the condensing tankless water heater into a single concentric vent termination.
Exhaust
Intake
Exhaust
Intake
ExhaustIntakeIntake Exhaust ExhaustIntake
3”/5” Stainless Steel Concentric Vent Kits by Metal Fab, Inc.
for RUTG-64DVL, RUTG-84DVL and RUTG-95DVL models
Low-Profile Horizontal Vent TerminationKit by Metal Fab, Inc.
• RTG20231
Contains: 90-Degree Elbow, Short Low-Profile Termination, Screws. For 2” x 4” Wall with 1-1/2” Siding. For up to 6" walls. Can be extended.
MF3CGVVPHK3
• RTG20234
Contains: 90-Degree Elbow, Short Low-Profile Termination, Screws.For 2” x 6” Wall with 1-1/2” Siding. For up to 8" walls.Can be extended.
MF3CGVVPHK4
• RTG20257
Contains: 90-Degree Elbow, Short Low-Profile Termination, Trim Ring, Screws. For up to 10" walls. Can be extended.
• RTG20258
Contains: 90-Degree Elbow, Short Low-Profile Termination, Trim Ring, Screws. For up to 12" walls. Can be extended.
• RTG20230
4” Short Low-Profile Termination
• RTG20233
6” Long Low-Profile Termination
• RTG20259
8” Long Low-Profile Termination
• RTG20260
10” Long Low-Profile Termination
Horizontal Vent Termination Kit by Metal Fab, Inc.
• RTG20210
Contains: 94-Degree Elbow, Long Termination, (1) 12” Wall Plate, Screws. For up to 10" walls. Can be extended.
MF3CGVPHK1
Vertical Vent Termination Kitby Metal Fab, Inc.
• RTG20211
Contains: Storm Collar, 6/12 to 12/12 Pitched Cone Flashing, Vertical Termination with Rain Cap.Does not include vertical vent pipe.
MF3CGVVK1
8 | for Ruud tankless water heaters
Tankless Venting
3"/5” Stainless Steel Concentric Tankless Venting by Metal Fab, Inc.
for RUTG-64DV, RUTG-84DV and RUTG-95DV models
6” Vent Length
• RTG20151W
5.66” overall length
MF3CGV6
90-Degree Elbow
• RTG20151A-1
8.1” rise - 8.1” run
MF3CGV90L
12” Vent Length
• RTG20151R
11.66” overall length
MF3CGV12
45-Degree Elbow
• RTG20151B-1
8.6” rise - 3” run
MF3CGV45L
24” Vent Length
• RTG20151C-1
23.66” overall length
MF3CGV24
Stucco Wall Thimble
• RTG20151Z
17” Wide - 12” Tall Up to 6” Deep Wall with Drywall and Stucco Rings
MF3CGVWPKS
36” Vent Length
• RTG20151D-1
35.66” overall length
MF3CGV36
Wall Thimble
• RTG20151X
12” Square, Up to 8” Deep Wall
MF3CGVWPK
Adjustable Vent Length
• RTG20151E-1
7.5” to 22” overall length
MF3GVL22
Wall Hanger
• RTG20151H
2-point pivot mounting
MF3CGVWH1
Adjustable Vent Length
• RTG20151Y
13” to 20” overall length
MF3CGVVAL20
Wall Support
• RTG20151G
3-point mounting
MF3CGVWS1
Vertical Cap Termination
• RTG20151P
12” overall height
MF3CGVPVT
Appliance Adapter
• RTG20144-3
Fits RUTG-66 or 53DV 5” overall length
MF3CGVPA
Storm Collar
• RTG20151M-1
split ring galvanized
MF3CGVSC
Condensate Drain
• RTG20151S
horizontal and vertical
8.6” overall length
MF3CGVVDS
6/12 to 12/12 Roof Flashing
• RTG20151L-1
15” square base galvanized
MF3CGVF-12
Horizontal Termination
• RTG20128-2
Short for 4” inch wall horizontal only
MF3CGVPHT
2/12 to 5/12 Roof Flashing
• RTG20151K-1
15” square base galvanized
MF3CGVF
Silicone Condensate Drain Tube Kit
• RTG20150A
6’ high temperature silicone tube, 2 clamps, 2 wire ties, instructions
Tall Cone Roof Flashing
• RTG20151J-1
15” square base galvanized
MF3CGVFT
Storm Collar
• RTG20151M-1
split ring galvanized
MF3CGVSC
Trim Ring
• RTG20151AA
Indoor/Outdoor
8.9” Dia - 5.25” Hole - Galv
MF3CGTR
for Ruud tankless water heaters | 9
Support Plate
• RTG20151T
17” square base support/fire stop
MF3CGVPS
NOTICE: The components listed on this page are manufactured by Metal Fab, Inc. and are not compatible with venting components manufac­tured by Heat-Fab listed in previous versions in the Tankless Parts and Accessories Catalog, or any other brand of vent­ing. Make no attempt to use venting components manufactured by dif­ferent companies on a single installation.
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use