Page 1
ELECTRIC BOOSTER WATER HEATERS
6 KW THRU 18 KW
RHEEM-RUUD Electric Booster Water Heaters
are specifically designed to fit under counters and
deliver 180°F (82°C) sanitizing rinse water for all
stationary rack and conveyor type commercial
dishwashers. They will raise preheated or cold
water to 180°F (82°C) rinse temperature for
compliance with Local Health Department
Sanitation Codes. In addition, these models can
be used as circulating tank commercial electric
water heaters for gravity or pump circulation to
an auxiliary storage tank.
SYSTEM SENTINEL – An exclusive Element
Diagnostic Panel. Our new line of electric commercial water heaters now includes a compact
instantaneous heater in an expanded range of
KW power inputs. The completely redesigned
single panel control center with hinged stainless
steel door provides ready access to all controls,
available for either single or three phase operation, these units provide the most versatile and
dependable operation we have ever offered in a
compact commercial water heater.
Engineering Information
Rheemglas
®
compact commercial electric water
heaters are quality engineered models designed
to provide the maximum amount of hot water from
the energy input of the heating elements. These
models include Rheem-Ruud’s System Sentinel
™
,
an exclusive Element Diagnositic Panel. A light
emitting diode monitors each element’s on-off
cycle and identifies any nonfunctioning element.
The precision thermostat(s) is easily adjustable
from 100°F to 180°F (38°C to 82°C), with positive
off position at low end temperature range. With
the design capability to be connected to 208, 240
and 600 volt, single or three phase power installations, they are ideally suited for a wide variety of
water heating systems. Detailed engineering
information is available in Tables A & B.
10 U.S. GALLON
(37.8 L) CAPACITY
208, 240 AND
600 VOLTAGES
COMPACT FOR UNDERCOUNTER
INSTALLATIONS
COMMERCIAL
WATER HEATERS
®
Page 2
Construction Features
GLASS LINED STORAGE TANK – Heavy
duty steel tank protects with double coating of
exclusive Rheemglas
®
to resist the corrosive
action of hot water. Designed for 150 PSI working
pressure. Each tank is supplied with cleanout and
two factory installed magnesium anode rods for
maximum cathodic protection.
WATER CONNECTIONS – Hot outlet and
cold inlet are 1-1/4" NPS brass nipples which
prevent excessive turbulence of heated water
and result in optimum tank draw.
HEAVY INSULATION – An effective blanket
of insulation completely surrounds tanks to limit
heat loss and assure high operating efficiency.
STAINLESS STEEL DOOR AND
CONTROL PANEL – Ideal for food service
applications.
HEATING ELEMENTS – Separate elements
are of the screw-in type and are made of top
quality Nichrome
®
embedded in magnesium oxide
sealed in a tinned copper tube to afford corrosion
resistance and long life.
AUTOMATIC TEMPERATURE
CONTROL – Water temperature is maintained
by an external easily adjustable thermostat
starting with an OFF position and ranging from
100°F to 180°F (38°C to 82°C) that insure instant
power shut off at the selected temperature.
Over temperature protection is provided by an
immersion high temperature limit control, factory
set at 200°F (93°C).
MAGNETIC CONTRACTORS – All models
equipped with contractors, factory wired for
simplicity of installation and economical
maintenance throughout life of unit.
240 VOLT CONTROL CIRCUIT – all
units are furnished with a 240 volt control circuit.
All controls (thermostats, high temperature limit,
etc.) are operated off of this basic 240 volt control
circuit.
ELECTRICAL CONNECTIONS – Pre-wired,
accessible control box with knock-outs on the side
in size selections to match the Canadian Electrical
Code. Sizes range from 1/2" to 2". New terminal
block will accept both copper and aluminum wire.
STANDARD EQUIPMENT ASME T&P
RELIEF VALVE – This is a double safety valve
that relieves when temperature or pressure
becomes excessive.
STAINLESS STEEL 6" LEGS
SYSTEM SENTINEL
™
– An element
diagnostic panel, utilizing light emitting diodes
(LED) corresponding to the number and location
of each heating element are energized when the
electric elements are operating. An unlit LED
pinpoints the exact location of a non-functioning
element, making element operation diagnosis
simple and positive.
Optional Equipment
ELEMENT FUSING – In addition to all the
above construction features, there is internal
fusing available that protects all elements,
magnetic contractors, thermostats and internal
wiring circuits.
For optional fusing, suffix “F” should be added to
the model number. Ex. EG10CF-12KW
Page 3
TABLE B – RECOVERY CAPACITIES
Recovery in U.S. Gallons/Hr. (GPH) and Liters/Hr. (LPH) at Various Temperature Rises
INPUT EQUIVALENT 40°F 50°F 60°F 70°F 80°F 90°F 100°F 110° F 120°F 130°F 140°F
KW BTU/HR. UNITS (22°C) (28°C) (33° C) (39° C) (45° C) (50°C) (56° C) (61° C) (67° C) (72°C) (78°C)
6 20,473 GPH 62 50 41 35 31 28 25 23 21 19 18
LPH 235 188 157 134 117 104 94 85 78 72 67
9 30,710 GPH 93 74 62 53 47 41 37 34 31 29 27
LPH 352 282 235 201 176 157 141 128 117 108 101
12 40,946 GPH 124 99 83 71 62 55 50 45 41 38 35
LPH 470 376 313 268 235 209 188 171 157 145 134
15 51,183 GPH 155 124 103 89 78 69 62 56 52 48 44
LPH 587 470 391 335 294 261 235 213 196 181 168
18 61,420 GPH 186 149 124 106 93 83 74 68 62 57 53
LPH 705 564 470 403 352 313 282 256 235 217 201
TABLE A – ELECTRICAL CHARACTERISTICS
6 3 2000 29 17 25 14 6 2 2 2 1
9 3 3000 43 25 38 22 9 6 3 2 1
12 3 4000 58 33 50 29 12 6 3 2 1
15 3 5000 72 42 63 36 15 6 3 2 1
18 3 6000 87 50 75 43 18 6 3 2 1
INPUT
KW
NUMBER
OF
ELEMENTS
ELEMENT
WATTAGE
FULL LOAD CURRENT
IN AMPERES
208V
PHASE
1 3
240V
PHASE
1 3
600
PHASE
3
NUMBER
OF CONTRACTORS
208/240V 600V
NUMBER
OF FUSES
30A CLASS G
208/240V 600V
3
/4" T&P FEMALE
VALVE TAPPING
213/4"
1
8
/4"
OUTLET
3
/4"
17"
13
6"
3
/4"
3
/4"
5
4
INLET
DRAIN
VALVE
NSF LABEL
CONTACTORS
FUSE BLOCKS (FUSED MODELS ONLY)
1
/4" HOT
1
OUTLET
NIPPLE
11/4" COLD
INLET
NIPPLE
TRANSFORMER
TERMINAL
BLOCK
APPROXIMATE WEIGHT 110 LBS.
OPTIONAL THERMOSTATS
(EGF MODELS ONLY)
THERMOSTAT
TEMPERATURE
LIMIT CONTROL
ELEMENT AND
CLEANOUT
ACCESS PANEL
CONTROL
CENTER
HINGED DOOR
1
21
/2"
Page 4
RHEEM-RUUD COMMERCIAL ELECTRIC
BOOSTER WATER HEATERS
SAMPLE SPECIFICATIONS (for trade reference only)
Water heater shall be Rheemglas Commercial Electric Model ________________ having an input of
__________ kW and a recovery rate of _____________ GPH at a ________° temperature rise and
equipped for ________volt, _________phase operation. Water heater shall be prewired, factory tested
and CSA listed. Tank shall be lined with a double coating of exclusive Rheemglas high temperature glass
formula and furnished with anode rods rigidly supported. Tank shall be designed for 150 psi working
pressure and shall be approve-listed and constructed in accordance with Canadian Electric Code and
shall be equipped with cleanout. Tank shall be completely insulated with a heavy blanket of insulation.
Water heater tank shall be covered by a limited three year warranty against tank failure.
Water heater shall be equipped with immersion “screw-in” elements, immersion thermostat(s), magnetic
contactors, and manual reset high temperature limit control. Large terminal block that accepts either CU
or AL filed conect wore, plus grounding screw for attaching equipment grounding connector. Water heater
shall include a factory installed System Sentinel™, and Element Diagnostic Panel utilizing light emitting
diodes. Each L.E.D. will correspond to the number and location of the heating elements and monitor their
on-off function.
THREE YEAR LIMITED WARRANTY
This product features a three year limited warranty against tank leaks. Please refer to Commercial
Warranty Information brochure for complete warranty information.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
Customer Service 1-800-268-6966
Warranty 1-800-263-8342
FORM NO. RR102CE-2CAN Rev.2 03/05 WP
In keeping with its policy of continuous progress and product improvement, Rheem-Ruud reserves the right to make changes without notice.
EST. 1947
RHEEM
CANADA
LTD/LTÉE
THANKS TO OUR EMPLOYEES
WE ARE
ISO9002
REGISTERED
COMMERCIAL
WATER HEATERS
Loading...