Rheem Front or Bottom Return - Slab Coil with PSC Motor Submittal Sheet
PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY ______________________________ DATE ________________________________________
UNIT SUMMARY
SUBMITTAL COVER SHEET
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A. 10-06 DC FORM NO. X11-1123 REV. 2
Supersedes Form No. X11-1123 Rev. 1
FORM NO. X33-1297
Supersedes Form No. X33-1241 Rev. 1
JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER SUBMITTED FOR APPROVAL RECORD
DATE OUTDOOR UNIT MODEL NO.
MODEL NO. INDOOR COIL MODEL NO.
SUBMITTAL SHEET FOR
FRONT RETURN AIR HANDLER
UNIT DATA
COOLING PERFORMANCE
TOTAL CAPACITY*..................
_______
MBH [kW]
SENSIBLE CAPACITY*............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TOTAL SUPPLY AIR ................
_______
CFM [L/s]
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
_______
°F [°C] WB
POWER INPUT REQUIREMENT ........
_______
kW
(*uses blower motor heat)
HEATING PERFORMANCE
TOTAL CAPACITY*..................
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
ELECTRIC HEAT CAPACITY ............
_______
kW
POWER INPUT REQUIREMENT ........
_______
kW
(*uses blower motor heat)
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
BLOWER SPEED ..........................
_______
RPM
POWER OUTPUT REQUIREMENT ..
_______
BHP
MOTOR RATING ........................
_______
HP [W]
POWER INPUT REQUIREMENT ........
_______
kW
ELECTRICAL DATA
POWER SUPPLY......................
____________ Hz
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ..........
_______
AMPS
CLEARANCES
SERVICE ACCESS FRONT 24" [609.6 mm]
RHBL- High Efficiency featuring New Industry Standard R-410A Refrigerant
RHAL- High Efficiency featuring New Industry Standard R-410A Refrigerant
FEATURES/ACCESSORIES
■
Front or Bottom* Return (*Requires RXHK-B01/B02 Kit)
■
Flow Check Piston for cooling or heat pump operation
■
Wall-hanging brackets
■
Built in Filter Rack (Uses Standard Filter Size)
■
Suitable for R-410A or R-22 Refrigerants (RHAL Only)
■
AHRI Certified
■
UL Certified
■
Molex Plug Connections for field installed heater kits
■
Dual Voltage Direct Drive Blower with multi-speed motor
■
Thermoplastic Drain Pan with bottom primary and secondary
connections
■
Optional Decorative Grill for front return applications (RXHK-C01/C02)
■
Optional Decorative Wall Grill (RXHK-D01)
■
Optional Factory Installed Condensate Float Switch which shuts off
the outdoor unit in event the condensate pan becomes clogged
Loading...