“Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air conditioners and heat pumps must be matched with
appropriate coil components to meet ENERGY STAR criteria. Ask your Contractor for details or visit www.energystar.gov <http://www.energystar.gov/>.”
Equipped with Comfort Control
2
System
™
• Serial communication enabled
• Increased system reliability and efficiency
• 32+ on-board diagnostic and operating codes
• Active Protection
™
with homeowner “Call for Service” alert
• Exclusive Design with dual 7-segment LED display
RASL- JEC
Five Models
18 SEER Two-Stage Cooling
Efficiencies up to 19.50 SEER/14.30 EER
Nominal Size 2 to 5 Ton [7.03 to 17.6 kW]
Cooling Capacity
24,600 to 57,200 BTU/HR [7.21 to 16.76 kW]
GENERAL TERMS OF LIMITED WARRANTY
Rheem will furnish a replacement for any part of this product which fails in
normal use and service within the applicable period stated, in accordance
with the terms of the limited warranty.
Limited Parts Warranty:
Rheem Prestige Series
®
equipment features a 10-year limited parts warranty.*
*This ten-year limited parts warranty is applicable only to single-phase products installed in
residential applications.
For Complete Details of the Limited Warranty, Including Applicable Terms and Conditions,
See Your Local Installer or Contact the Manufacturer for a Copy.
RASL- JEC Conditional Replacement Warranty:
Rheem will provide a replacement model (if an exact replacement is not
available, an equivalent product will be provided) to the original purchaser if
the compressor fails within 10 years. See product warranty card for additional
information.
Starting at:
Price $
The Rheem Prestige Series™ High Efficiency Two-Stage RASL- JEC Condensing Unit was designed with performance in mind. These units offer
comfort, energy conservation and dependability for single, multi-family and
light commercial applications. The Rheem Prestige Series™ Two-Stage
RASL- JEC Condensing Units are the result of an ongoing development
program for improved efficiencies. With system SEER’s as high as 19.5,
these units continue a tradition of delivering high efficiency.
■ Industry’s lowest profile design: 33" maximum height
■ The Comfort Control
2
System™ provides over 32+ on-board diagnostics
and fault history codes for condensing units with single-phase compressors by detecting system and electrical problems. The integrated diagnostics with Active Protection™ prevents compressor operation when
potentially harmful conditions are detected. Sends “Call for Service” alert
notification to the thermostat to alert the homeowner of required service.
■ Serial Communication Enhanced – When installed with a Serial
Communicating Air Handler (RHPL/RHPN-HM****JC) and user interface
control (RHC-TST501CMMS) Series 500 thermostat this unit offers 4 or 2
wire installation, auto-configuration, and diagnostic messaging with full
communicating capability.
■ Legacy Enabled – Unit can be conventionally wired using 24VAC with
non-communicating Rheem Prestige air-handlers or furnaces with noncommunicating thermostat.
■ Features a 10-year conditional unit replacement warranty and 10-year
parts warranty when properly installed with a new Rheem air handler or
Rheem indoor coil with a Rheem gas furnace. See product warranty card
for additional information.
■ Reliable Two-Stage operation for precise temperature control with On-
Demand dehumidification feature. When matched with ECM gas furnace or
air-handler, the system adjusts airflow to help control humidity for unsurpassed comfort in the cooling mode.
■ All controls are accessible by removing one service panel. Removable
top grille provides access to the condenser fan motor and condenser coil.
■ Attractive, louvered wrap-around jacket protects the coil from yard haz-
ards and weather extremes. Top grille is steel reinforced for extra
strength. Cabinet is powder painted for all-weather protection.
■ For quiet operation and improved efficiency, models feature an ECM two-
speed condenser fan motor with a 3-blade outdoor fan.
■ All models meet or exceed a 1000-hour salt spray test per ASTM B117
Standard Practice for Operating Salt Spray Testing Apparatus.