®
STAINLESS STEEL
AquaMAX sets a
“
new benchmark in electric water
heating with Stainless Steel
AUSTRALIAN MADE STAINLESS STEEL ELECTRIC WATER HEATERS
”
10 YEAR CYLINDER WARRANTY
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
A
Q
U
A
M
A
X
AQUAMAX
1
AQUAMAX
AQUAMAX
AQUAMAX
AQUAMAX
AQUAMAX
LIGHTER
Significantly lighter (up to 50%) than
water heaters with conventional vitreous
enamel cylinders, for easier handling.
NO ANODE
Unlike vitreous enamel cylinders,
Stainless Steel cylinders DO NOT require
a sacrificial anode to prevent corrosion.
So there is no need for inspection or
replacement of the anode over the life
of the water heater.
ENERGY EFFICIENT
Exceeds MEPS (Minimum Energy
Performance Standard) by up to
27% for greater energy efficiency.
A SIZE FOR ANY HOME
Models from 80 litres to 315
litres for indoor or outdoor installation
STAINLESS STEEL FITTINGS
For all water connections.
2
Stainless Steel cylinders can resist
corrosion for longer than conventional
vitreous enamel cylinders.*
TOP OF TANK HOT
WATER OUTLET
Maximises quantity of hot water
delivered. Universally fits either left
or right handed installations.
UP to 27%2
27
%
more efficient
than MEPS!
AquaMAX Stainless Steel
Electric Water Heaters
Experience the superior performance of stainless steel in the AquaMAX Stainless Steel
Electric Water Heater range. Stainless Steel cylinders resist corrosion for longer than
conventional vitreous enamel with the added assurance of purity from the material of
choice for kitchens and surgeries.
®
®
AquaMAX Stainless Steel Electric Water Heaters do not require sacrificial anode protection which,
combined with significant weight advantages, make them easier to transport, install and maintain.
Stainless Steel
fittings on all
outlets.
AQUAMAX STAINLESS STEEL
ELECTRIC WATER HEATER SPECIFICATIONS
AquaMAX sets a new
benchmark in electric
water heating
Stainless Steel Cylinder
•
1
• 10 year cylinder warranty
• Energy Efficient - Up to 27%
more efficient than MEPS
• No Anode
3
2
• Up to 50% Lighter
*Note: AquaMAX Stainless Steel Water Heaters are not recommended
for installation in some areas. Refer to the AquaMAX website for
details of areas not recommended and for which product is not
covered by warranty.
315 Litre 250 Litre 160 Litre 125 Litre 80 Litre
Stainless Steel Electric Specifications
PTR VALVE
PRESSURE & TEMP
RELIEF
VALVE (PTR Valve)
Rp15 (1/2”) Female
H
A
COLD WATER INLET
Rp20 (3/4”) Female
B
HOT WATER OUTLET
Rp20 (3/4”) Female
TOP VIEW
V
D
Water Heater Dimensions (mm)
C V O H A B D
315 145 710 1760 1750 1540 230 620
O
ELECTRICAL
COVER
WIRING ENTRY
C
FRONT VIEW
COLD WATER INLET
Rp20 (3/4”) Female
B
250 145 710 1440 1430 1220 230 620
160 110 580 1615 1605 1425 185 487
125 110 580 1295 1285 1105 185 487
80 110 580 885 875 695 185 487
Note: Allow additional top clearance for hot outlet
fittings and pipe work.
E315S36-SS
Number of People Serviced 4-6 4-6 3-5 3-5 2-4 2-4 2-3 2-3 1-2
Hot Water Delivery Litres 315 315 250 250 160 160 125 125 80
Weight (empty) kg 55 55 45 45 40 40 30 30 25
Maximum Loading Watts 3600 4800 3600 4800 2400 3600 1800 3600 3600
Heating Element Lower Watts 3600 4800 3600 4800 2400 3600 1800 3600 3600
Voltage (single phase) 240Vac 240Vac 240Vac 240Vac 240Vac
Maximum Supply Pressure
- with expansion control valve (ECV)
- without expansion control valve (ECV)
Pressure & Temp Relief Valve 1000 kPa 1000 kPa 1400 kPa 1400 kPa 1400 kPa
ECV setting 850 kPa 850 kPa 1200 kPa 1200 kPa 1200 kPa
Thermostat setting (Maximum) 75ºC 75ºC 75ºC 75ºC 75ºC
Hot & Cold Water connection Rp 20 (3/4") Female Rp 20 (3/4") Female Rp 20 (3/4") Female Rp 20 (3/4") Female
Warranty (Cylinder)
Warranty (Parts & Labour)
Protection rating IPX4 IPX4 IPX4 IPX4 IPX4
Watermark Licence No. WMKA00200 WMKA00200 WMKA00200 WMKA00200 WMKA00200
Electrical Safety Approval No. SGSEA/120769 SGSEA/120769 SGSEA/120769 SGSEA/120769 SGSEA/120769
Exceeds MEPS by: 20% 22% 15% 20% 27%
1
Full warranty details available on request from AquaMAX . Call Toll Free 1800 676 000 or view at www.aquamax.com.au
2
Refer to specification table for all models 3 Up to 50% lighter than vitreous enamel cylinders of the same capacity
1
1
680 kPa 680 kPa 960kpa 960kpa 960kpa
800 kPa 800 kPa 1120 kPa 1120 k Pa 1120 kPa
10 years 10 years 10 years 10 years 10 years
1 year 1 year 1 year 1 year 1 year
E315S48-SS
E250S36-SS
E250S48-SS
E160S24-SS
E160S36-SS
E125S18-SS
E125S36-SS
E80S36-SS
®
AquaMAX Australia Pty Ltd 463-467 Warrigal Road Moorabbin Vic 3189 Toll Free: 1800 676 000
Sales Fax: (03) 9532 5244 Service Fax: (03) 9556 5534
A.B.N. 37 138 189 689
Email: sales@aquamax.com.au For more information visit www.aquamax.com.au
© Copyright 2015 AquaMAX Australia Pty Ltd. Neither whole nor part of this publication may be reproduced without permission.
Materials, product data and specifications are subject to change without notice.
Part No. AQ0905047-C
Aug2016 RHE099
Loading...