Rheem CMR50245 User Manual
Your Marathon is warranted not to leak for as long as you own your home*…
The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard
tank construction…A seamless blow molded polybutylene inner tank with a filament wound
fiberglass outer tank for maximum strength. Superior performance, high-efficiency and low
operating cost…for a lifetime*!
*See Residential Warranty Information Brochure at your dealer for complete warranty information.
C
5-3/4"
A B
TANK CAPACITY ROUGHING IN DIMENSIONS (SHOWN IN INCHES) SHIPPING WEIGHT
ELEMENT TANK HEIGHT TO
IMPERIAL WATTAGE HEIGHT WATER CONN. DIAMETER
MODEL NUMBER GALLONS LITRES @ 240 VOLTS AMPERAGE A B C LBS. KG
CMR50245 40 180 4500/4500 18.75 62-3/4 66-3/4 23-1/2 103 46.7
CMR75245 60 270 4500/4500 18.75 58-1/2 62-1/2 28-1/4 127 57.6
MARATHON
™
Residential Electric Water Heaters
Available in 40 and 60 Imperial Gallon Electric Models
Lifetime Limited Tank Warranty* 5 Year Limited Parts Warranty*
•
The seamless, blow-molded, polybutylene
tank is impervious to rust and corrosion
•
Multiple layers of filament wound fiberglass
give the tank unmatched strength
•
The tank is designed, built and warranted
not to leak “for as long as you own your
home”
•
Envirofoam insulation is free of ozone
depleting CFC’s and HCFC’s so it saves
the planet and it saves energy
•
Pipe wrap energy kit included to reduce
heat loss from plumbing lines
•
Recessed drain valve is out of the way of
brooms and scrubbers
•
Tough molded outer shell resists dents and
scratches
•
Factory installed temperature and pressure
relief valve for greater value and security
•
Conduit between control boxes facilitates
wiring for “off-peak” use
•
All plastic tank eliminates the need for an
anode rod – preventing potential odor
problems
•
C191.1 CSA Energy Efficiency
*See Residential Warranty Information Brochure for
complete warranty information.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd.,128 Barton Street West, Hamilton, Ontario L8N 3P3
Customer Service 1-800-268-6966
Warranty 1-800-263-8342
FORM NO. 101-42CAN Rev.1 09/05 WP
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
EST. 1947
RHEEM
CANADA
LTD/LTÉE
THANKS TO OUR EMPLOYEES
WE ARE
ISO9002
REGISTERED
CONSTRUCTION FEATURES
1. Energy Saving Pipe Wrap Kit – reduces heat loss through plumbing
lines.
2. Temperature and Pressure Relief Valve – factory installed.
3. Water Tight Grommets – keep out overhead moisture and condensation.
4. Seamless Molded Non-metallic Inner Tank – can’t rust or corrode.
5. Fill Tube – high temperature material to withstand thermal storage and
other high temperature applications.
6. High-tech Heating Elements – upper element fused to protect tank
against “dry fire”. Bottom element low watt, stainless steel for long life.
7. Polyethylene Outer Jacket – resists dents and scratches during transit,
installation and beyond.
8. Envirofoam™ – a great energy saver and friendly to the ozone layer.
It’s made without CFC’s and HCFC’s.
9. Fiberglass Tank – has unmatched strength.
10. Recessed Drain Valve – protected from damage.
Loading...