Rheem Classic Series 80 AFUE 2-Stage PSC Motor Specification

Rheem Classic®Series Super Quiet 80

™

A.F.U.E.†Two-Stage Downflow
Gas Furnaces

FORM NO. G11-515 REV. 1

RGLQ- Series

Models with Input Rates from
50,000 to 150,000 BTU/HR
[15 to 44 kW]
(U.S. & Canadian Models)

• The Rheem Classic

®

Series Super Quiet 80

™

2-Stage line of
downflow gas furnaces is designed for installation in closets,
alcoves, utility rooms, or attics. The design is certified by CSA
International.

• Patented heat exchanger, constructed of aluminized steel for the
maximum in corrosion resistance and thermal fatigue reliability.

• Low profile “34 inch” [864 mm] design is lighter and easier to
handle, and leaves room for optional equipment.

• Left or right side gas and electric inlet connections with quick,
simple change.

• Direct spark ignition.

• Integrated control board with humidifier and electronic air
cleaner hookups.

• Insulated blower compartment, a two stage gas valve and a
specially designed two speed draft inducer motor make it one
of the quietest furnaces on the market today.

• Pre-paint galvanized steel cabinet.

• Grab-holes in doors to aid in easy door removal and
replacement.

• Compatible with single or two-stage thermostat. (For optimal
performance, two-stage thermostat recommended.)

• A variety of cooling coils and plenums designed to use with
Rheem Classic

®

Series Super Quiet 80

™

2-Stage gas furnaces

are available as optional accessories.

Air

Gas Furnaces

RGLQ Series

✝A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with

Department of Energy test procedures.

Annual Fuel Utilization Efficiency -

AFUE

THIS MODEL

97%78%

HIGH

MID

82% 88%

80.0%

ENER UIDE

Air

Table of Contents

RGLQ Series

2

TABLE OF CONTENTS

Standard & Optional Equipment ......................................................................3

Model Features/Physical Data & Specifications..................................................4

Model Number Identification ............................................................................5

Dimensional Data............................................................................................6

Blower Performance Data ................................................................................7

Accessories....................................................................................................8

Limited Warranty ............................................................................................9

Air

Standard & Optional Equipment

RGLQ Series

3

STANDARD EQUIPMENT

Completely assembled and wired; 2 speed induced draft blower;
high and low pressure switches; 2 stage redundant main gas control;
blower compartment door safety switch; solid state time on/time off
blower control; limit control; transformer; direct drive multi-speed
blower motor. Furnaces are equipped with cooling/heating relay
and transformer (40VA) ready for air conditioning applications.
(Please note: a thermostat is not included as standard equipment.)
Flame sensor diagnostics; fused-protection (secondary).

NOTE: Furnace is not listed for use with fuels other than natural or L.P.

(propane) gas.

The complete terms of limited and other warranties are available
at our sales office, or through local installer.

OPTIONAL EQUIPMENT

All models can be converted by a qualified Rheem professional or
local service dealer to use L.P. (propane) gas without changing
burners. Factory approved kits must be used to convert from natural
to L.P. (propane) gas and may be ordered as optional accessories.

For L.P. (propane) operation, refer to Conversion Kit Index Form.

NOTE: For natural and L.P. (propane) gas models, direct spark ignition

is 100% lockout type.

WARNING

THIS FURNACE IS NOT APPROVED

OR RECOMMENDED

FOR USE IN MOBILE HOMES

INTEGRATED
FURNACE
CONTROL

HEAT EXCHANGER

IN-SHOT BURNERS

DIRECT SPARK IGNITOR

REMOTE SENSOR

TWO-SPEED DRAFT
INDUCER MOTOR

Air

Model Features/Physical Data & Specifications

RGLQ Series

4

Physical Data and Specifications

U.S. and Canadian Models

• Patented heat exchanger, constructed of aluminized steel for the
maximum in corrosion resistance and thermal fatigue reliability.

• Low profile “34 inch” [864 mm] design is lighter and easier to
handle, and leaves room for optional equipment.

• Left or right side gas and electric inlet connections with quick,
simple change.

• Direct spark ignition.

• Integrated control board with humidifier and electronic air
cleaner hookups.

• Insulated blower compartment, a two stage gas valve and a
specially designed two speed draft inducer motor make it one
of the quietest furnaces on the market today.

• Pre-paint galvanized steel cabinet.

• Grab-holes in doors to aid in easy door removal and
replacement.

• Compatible with single or two-stage thermostat. (For optimal
performance, two-stage thermostat recommended.)

• A variety of cooling coils and plenums designed to use with
Rheem Classic

®

Series Super Quiet 80

™

2-Stage gas furnaces

are available as optional accessories.

Model Features

NOTES: All models are 115V, 60HZ, 1Ø. Gas connection size for all models is 1/2" [12.7 mm] N.P.T.

➀

In accordance with D.O.E. test procedures.

➁

See Conversion Kit Index for high altitude derate in U.S. applications. For Canadian applications, reference the furnace installation instructions.

[ ] Designates Metric Conversions

MODEL NUMBERS
RGLQ- SERIES

High Input–BTU–BTU/Hr [kW] ➁
Heating Capacity–BTU/Hr [kW] ➀
Low Input–BTU/Hr [kW] 35,000 [10] 52,500 [15]
Heating Capacity–BTU/Hr [kW] 28,000 [8] 41,600 [12]
Heating–Ext. Static Pressure [kPa] .10 [.025] .12 [.029] .15 [.037] .15 [.037] .20 [.05] .20 [.05]

Blower (D x W) [mm]

Motor H.P.–[W]
Speeds–Type

Motor Full Load Amps 6.8 7.1
Heating Speed–High Fire MED-LOW MED-HIGH
Heating Speed–Low Fire LOW MED-LOW LOW LOW LOW LOW
Cooling Speed HIGH HIGH
Cooling CFM @ .5" [kPa] E.S.P.

(Nominal) [L/s]
Max. E.S.P. (In. W.C.) [kPa] 0.5 [.12] 0.5 [.12]
Temperature Rise Range °F [°C]

High Input
Temperature Rise Range °F [°C]

Low Input
Max. Outlet Air Temp. °F

[°C]
Standard Filter–In.

[mm]
Approx. Shipping Weight (Lbs.)

[kg]
AFUE ➀

05EAUER
05NAUER

50,000 [15] 75,000 [22]
40,360 [12] 61,020 [18]

11 x 6

[279 x 152]

1

/2 [373]

4-PSC

1200
[566]

25-55

[13.9-30.6]

20-50

[11.1-27.8]

155

[68.3]

(1) 14 x 20

[356 x 508]

85

[39]

80.0% 80.0%

07EAMER

07NAMER

11 x 7

[279 x 178]

1

/2 [373]

4-PSC

1200
[566]

35-65

[19.4-36.1]

30-60

[16.7-33.0]

165

[78.3]

(2) 12 x 20

[306 x 508]

105
[48]

10EAMER
10NAMER

100,000 [29] 100,000 [29] 125,000 [37]

81,600 [24] 81,040 [24] 101,750 [29]
70,000 [20] 70,000 [20] 87,500 [25]
56,000 [16] 56,000 [16] 70,000 [20]

11 x 7

[279 x 178]

1

/2 [373]

4-PSC

7.1 9.5 9.5

MED-HIGH MED-HIGH MED-HIGH

HIGH HIGH HIGH
1200

[566]

0.5 [.12] 0.5 [.12] 0.5 [.12]
45-75

[25.0-41.7]

20-50

[11.1-27.8]

180

[82.2]

(2) 12 x 20

[306 x 508]

115
[52]

80.0% 80.0% 80.0%

10EBRJR
10NBRJR

11 x 10

[279 x 254]

3

/4 [559]
4-PSC

2000

[944]

30-60

[16.7-33.3]

35-65

[19.4-36.1]

180

[82.2]

(2) 14 x 20

[356 x 508]

120
[54]

12EARJR
12NARJR

11 x 10

[279 x 254]

3

/4 [559]

4-PSC

2000
[944]

35-65

[19.4-36.1]

25-55

[13.9-30.6]

180

[82.2]

(2) 14 x 20

[356 x 508]

140
[63]

15EARJR
15NARJR

150,000 [44]
121,550 [35]
105,000 [30]

84,000 [24]

11 x 10

[279 x 254]

3

/4 [559]

4-PSC

9.5

MED-HIGH

HIGH
2000

[944]

0.5 [.12]
50-80

[27.8-44.4]

30-60

[16.7-33.3]

190

[87.7]

(2) 14 x 20

[356 x 508]

150

[68]

80.0%