Rheem Front or Bottom Return - Slab Coil with PSC Motor, High Efficiency - ECM Motor - Standard N Coil, High Efficiency - X-13 Motor - 35 Cabinet Height, High Efficiency - X-13 Motor - Standard N Coil, RH1T Product Literature

Lightweight & Durable – With All the Right Connections.

RHEEM AIR HANDLERS & COILS

We Thought of Everything... And Then Some.

The new Rheem aluminum coil used in our air handlers, cased coils and replacement coils is not only more durable
than a traditional copper coil, it’s also lighter and easier to handle. And you’re going to love the copper refrigerant
connections we’ve included, making installation so easy, you’ll be able to finish the job in no time.

360˚ Performance

The new Rheem aluminum coil is built to perform like
a champion. Its all-aluminum construction makes it
extra durable, allowing the coil to run better and last
longer. Even the endplates are aluminum, so the unit
looks as good as it runs. Every coil is factory-tested,
checked for leaks and held to the highest industry
standards. If it doesn’t pass the test, it doesn’t go in
the box. We’re also proud that the coil’s robust design
far exceeds normal operating pressures. Precise
heat-control of the automated brazing oven during the
brazing process means you get a quality braze joint
every time. So, you can guarantee your customers
one of the most durable, long-lasting products on the
market today.

360˚ Integration

™

EcoNet

EcoNet is an exclusive technology that allows Rheem heating, cooling and water
heating products to communicate with each other on one integrated network. In
addition to giving homeowners an easy way to control the most energy-consuming systems in the home – from home or
on-the-go – it also makes it faster and easier for you to accurately install, set up and maintain a complete home comfort system.

™

™

360˚ Installability

We thought long and hard about features that would
make our new aluminum coil easier to install – like
our factory-provided copper refrigerant connections.
These transitions allow you to braze copper to copper
in the field to create a familiar field braze joint, making
installation faster and easier. Our new multi-poise
coils are also lighter and can handle any installation
orientation. And the condensate drain connections are
angled at 45 degrees, providing maximum clearance –
so the entire system installs like a breeze.

™

360˚ Serviceability

Servicing a new Rheem aluminum coil takes less
time due to several deliberate changes. For starters,
we’ve redesigned the mechanical TXV fittings, so
if the expansion valve needs replacing, you won’t
need to un-sweat the connections. We’ve also given
you easier access to the internal components of the
coil, and you won’t need any special jobsite tools. A
standard nut driver or drill attachment will do the trick,
getting you in and out faster, and saving you time and
your customers money.

™