Rheem 874T26PF Specifications Sheet
RHEEM 26 CONTINUOUS FLOW
PRODUCT DATA
RHEEM 26 CONTINUOUS FLOW
GAS HOT WATER
B
A
*
1
Continuous Flow Warranty Conditions:
10 Years parts and 3 Years labour on H eat Exchanger, 3 Years parts & labour on oth er components,
when installed in a d omestic dwelling. For all o ther installations, the w arranty period is 1 Year part s
and labour on Heat Exc hanger and other components . Conditions apply. See the Rhe em warranty set
out in the Owner's Gui de & Installation Instruc tions or view at www.rhe em.com.au/warrant y.
2
60ºC and higher temp erature models and some applic ations require a tempering valve in acc ordance
with AS 3500.4.
3
Rheem Flue D iverters 299287/299285 are approved fo r use on Rheem 876T26NF and 874T26NF
models only. ey must no t be fitted to other Rheem mo dels or other branded mod els, as this may
create an unsafe operating situation.
Information cur rent as at 01/09/2017. Mater ials and data are subject to chan ge without notice.
® Registered Trademark of R heem Australia Pty Ltd .
™ Trademark of SAI G lobal.
SPECIFICATION
Model Number
Natural G as: 876T26NF
Propane: 876 T26PF
Pre-set Temperature á* 50 60
Number of Peop le 2 – 5
Gas Type
Gas Energy Rating Stars 6.0
-SV^9H[L'á*9PZL L/min 26
Min. Operating Flow Rate L/min 2.0
5VTPUHS.H Z*VUZ\TW[PV U MJ/hr 199
Dimensions
Height A mm 520
Width B mm 355
+LW[O* mm 187
Depth – from wall to
Hot Water Outlet
Depth – from wall to
*VSK>H[LY0USL[
Depth – from wall to
.HZ0USL[
Weight (empty ) kg 16
Max. Water Supp ly Pressure kPa 1000
Min. Water Supply Pr essure kPa 120
*VSK>H[LY*VUULJ[PVU R ¾
/V[>H[LY*VUULJ [PVU R ¾
.HZ*VUULJ[PVU R ¾
Accessories
7PWL*V]LY 299426
9LJLZZ)V_ 299842
>HSS4V\U[:LJ \YP[`2P [ 299868
-S\L+P]LY [LYZ¶:[HUK HYK
– Extended
mm 87
mm 68
mm 77
874T26NF
874T26PF
Natural Gas/
Propane
299287
299285
NEW
RHEEM AUSTRALIA Pty Ltd
Rheem Australi a Pty Ltd.
1 Alan Street, Ryd almere, New South Wales 2116, Austr alia
PO Box 7508, S ilverwater, New South Wales 2128 , Australia.
| www.rheem.com.au | sales 132 552 | service 131 031
• New look
• New features
Rheem - IDHMK T Gas 26CF Brch r
• A New Standard in Continuous Flow
COMES ON STEADY, HOT AND STRONG INSTALL AINSTALL A
RHEEM 26 CONTINUOUS FLOW
COLD WATER
INLET
GAS INLET
HOT WATER
OUTLET
POWER
CONNECTION
GAS HOT WATER
NEW RHEEM 26
CONTINUOUS FLOW
All-new technology from Australia’s favourite hot water brand.
More features, more flexibility and the performance you expect from
Rheem to keep you in endless hot water.
• 6 Star efficiency
• Sleek new design:
- Concealed screws for a clean look
- Modern, designer colour
• 50ºC models available for greater safety – adjustable up to 53ºC
at installation for hotter water at the tap
• Digital OK monitor:
- Displays error codes should a fault occur
- Shows your set hot water temperature when operating
• More compact than some 26L units (even better for small spaces):
520mm H x 355mm W x 187mm D
• Improved hot water delivery at cold start up
(improved flow, while saving water)
• More flexible (so it’s installable in more places with confidence):
- Just 2L/minute minimum operating water flow
- Minimum water supply pressure just 120kPa
- Maximum water supply pressure 1,000kPa
• Compatible with Rheem Flue Diverters – both Standard & Extended
• 10 Year Heat Exchanger warranty
• Flamesafe® overheat protection, automatically shuts down your
water heater should it overheat
• Rheem EZ Link
®
compatible, to link two units for up to
52L/minute delivery
• Rheem Q Factor
®
equipped, for hot water with minimal fluctuation
when multiple taps demand hot water
• Remote Temperature Controllers available for convenience
and added safety
2
1
RHEEM FLUE DIVERTERS
Rheem Flue Diverters provide added flexibility in installation while enabling compliance with relevant national and local regulations.
NOTE: You should confirm with your local authorities that the installation complies with all regulations applicable in the area.
• Fits to Rheem 26 standard unit (Natural gas models only)3
• Stainless steel finish
• Left or right handed fitting
• Fixed heat shield for added homeowner safety
• Easily fitted using brackets provided
• Can be fitted to unit mounted in a Rheem recess box
• Rheem Extended Flue Diverter allows for added flexibility in design - to set the Rheem unit back in the balcony
• Rheem Extended Flue Diverter includes an additional wall support bracket for installations where this is necessary
Rheem Standard Flue Diverter
22.5
380
119 137
HOT WATER
OUTLET
POWER
CONNECTION
GAS INLET
COLD WATER
INLET
287
Rheem Extended Flue Diverter
355
782
1139
924NO GREATER THAN
36
EDGE OF
BALCONY
119 137
#
287
1
# Refer to your State or Territory gazetted regulation revision of AS/NZS 5601-XXXX to ensure installation compliance.
COMES ON STEADY, HOT AND STRONG INSTALL A
Loading...