Rheem 191045G7 Specifications Sheet

RHEEM COMPACT ELECTRIC
Indoor/
Outdoor
1
INSTALLATION
ELECTRIC
45L
DELIVERY*
7
YEAR
WARRANTY
FEATURES
• The Most Compact available in the over-40L capacity range
• Just 668mm HIGH (including anode cap)
• Smallest Diameter on the market – 393mm
• 45L Delivery*
• 7 Year Cylinder Warranty
• Designed for restricted space installations
• Dual Handed – easier to install
• Available in 2.4 and 3.6kW ratings plus a 2.4kW model with power cord
1
HANDED
MOST COMPACT
OVER-40L AVAILABLE
668mm Height
393mm Diameter
1
• Recessed Plug Fittings
WHY CHOOSE RHEEM
• Backed by over 70 years of Rheem water heating experience
• Capacities to suit every application and hot water requirement
• Mains pressure water delivery for water that comes on steady, hot and strong!
• Full technical support through Rheem’s National Service Network
INSTALL A
RHEEM COMPACT ELECTRIC
Cold Water Inlet
Cold Water Inlet
D
E
F
A
Hot Water Outlet
DESIGNED FOR EASY INSTALLATION
Rheem COMPACT has been specifically designed for a fast and easy installation. Whilst suitable for indoor or outdoor installation†, its compact size means it is the unit of choice when replacing water heaters underneath the kitchen bench, in cupboards, or in the laundry. And with dual handed fittings and recessed plugs it can be rotated to fit into tight spaces.
RHEEM’S INSIDE STORY IS JUST AS STRONG
A ceramic lining is bonded to the inside of the cylinder providing long life protection against the varying water conditions found across Australia, backed by a 7 year cylinder warranty.
RHEEM IS TOUGH
The Rheem storage cylinder is made from specially formulated steel tough enough to withstand varying water and heating cycle pressures.
RHEEM® COMPACT SPECIFICATIONS
Warranty Model
Rheem Single Element Dual Handed
7 Years
1
Hot Water Delivery Litres 45*
Storage Capacity Litres 49
Dimensions A mm 668
B mm 393
C mm 429
D mm 346
E mm 14 2
F mm 80
H degrees 26
J degrees 59
kW rating 2.4
3.6
Approx. Weight Empty kg 22
Inlet/Outlet Connections Rp ¾/20
Relief Valve Setting kPa 140 0
ECV Setting# kPa 120 0
Max. Supply Pressure kPa
With Expansion Control Valve 960
Without Expansion Control Valve 112 0
191045 191045/P
4
4
SERVICE
Hot Water Outlet
A
D
All water heaters operate on 240 volt single phase electricity supply.
# ECV not supplied with water heater.
Rated hot water deliver y is 40L in accordance with AS/NZS4692.1.
*
Actual deliver y is 45Ls when tested to AS/NZS4692.1.
† Plug and lead model available in 2.4kW Rating only, this model is only suitable
for indoor installations.
1 Warranty: 7 Years on Cylinder, 3 Years Labour on Cylinder, 1 Year Par ts & Labour
warranty on all other components for Domestic (non- Commercial) installations.
Conditions apply. See the Rheem warranty set out in the Owner’s Guide
& Installation Instructions or view at www.rheem.com.au/warranty.
E
Cold Water Inlet
Australia
131 031
COMPACT
MAINS PR ESS URE EL ECTRI C WATER HEATER - FORGE D TOUG H
Hot Water Outlet
Relief ValveRelief Valve
Cold Water Inlet
F
Relief Valve Fittings (Valve shown for Left hand installation)
B
C
HH
JJ
Rheem Australia Pty Ltd.
1 Alan Street, Rydalmere, New South Wales 2116, Australia PO Box 6, Rydalmere, New South Wales 2116, Australia.
Version 3.0 (March 2014)
RHEEM AUSTRALIA Pty Ltd | www.rheem.com.au | sales 132 552 | service 131 031
FLAME_RHEE692A_03/14
INSTALL A
Loading...