Rheem 024JEC, 036JEC Submittal Sheet
PROJECT NAME ______________________________________________________________________________
LOCATION __________________________________________________________________________________
ARCHITECT__________________________________________________________________________________
ENGINEER __________________________________________________________________________________
CONTRACTOR ______________________________________________________________________________
SUBMITTED BY ______________________________ DATE ________________________________________
UNIT SUMMARY
SUBMITTAL COVER SHEET
Quantity
Unit Designation
Model No.
Total Cooling
Sensible Cooling
Air Ent. Evaporator
Air Lvg. Evaporator
Heating Input
Heating Output
CFM/ESP
EER/SEER
Electrical
Minimum Ampacity
Min.-Max. Breaker
Net Unit Weight
Accessory
Catalog Form Number
ACCESSORIES: NOTES:
PRINTED IN U.S.A. 10-06 DC FORM NO. X11-1123 REV. 2
Supersedes Form No. X11-1123 Rev. 1
[ ] Designates Metric Conversions
FORM NO. X33-1268
Supersedes Form No. X33-1240
JOB NAME LOCATION
CONTRACTOR ORDER NO.
ENGINEER SUBMITTED FOR APPROVAL RECORD
DATE
MODEL NO.
AIR HANDLER MODEL NO.
INDOOR COIL MODEL NO.
DIMENSIONS
UNIT DATA
COOLING PERFORMANCE
EFFICIENCY ........................
_______
SEER/EER
TOTAL CAPACITY*..................
_______
MBH [kW]
SENSIBLE CAPACITY*............
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
_______
°F [°C] WB
HEATING PERFORMANCE
EFFICIENCY ................................
_______
HSPF
TOTAL CAPACITY*..................
_______
MBH [kW]
OUTDOOR DESIGN TEMP. ....
_______
°F [°C] DB
TEMP. OF AIR ENTERING
EVAPORATOR COIL............
_______
°F [°C] DB
SUPPLY AIR BLOWER PERFORMANCE
TOTAL AIR SUPPLY ................
_______
CFM [L/s]
TOTAL RESISTANCE EXTERNAL
TO UNIT......................................
_______
IWG
MOTOR RATING ........................
_______
HP [W]
ELECTRICAL DATA
POWER SUPPLY......................
____________ Hz
TOTAL UNIT AMPACITY................
_______
AMPS
MINIMUM WIRE SIZE ....................
_______
AWG
MAXIMUM OVERCURRENT DEVICE
FUSES/HACR BREAKER ..........
_______
AMPS
CLEARANCES
SERVICE ACCESS 24" [610 mm]
AIR INLETS 12" [305 mm]
ABOVE UNIT 60" [1524 mm]
SUBMITTAL SHEET FOR
(-)PRL- JEC 16 SEER
REMOTE TWO-STAGE
HEAT PUMP UNITS
2, 3, 4 & 5 NOMINAL TON
[7.03, 10.5, 14 & 17.58 kW]
Equipped with
Comfort Control
2
System
™
• Serial communication enabled
• Increased system reliability and efficiency
• 37+ on-board diagnostic and operating codes
• Active Protection
™
with homeowner “Call for Service” alert
• Exclusive Design with dual 7-segment LED display
“Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air
conditioners and heat pumps must be matched with appropriate coil components to meet ENERGY STAR
criteria. Ask your Contractor for details or visit www.energystar.gov <http://www.energystar.gov/>.”
AIR DISCHARGE
ALLOW 60⬙ [1524 mm] CLEARANCE
W
H
AIR INLETS
(LOUVERS)
ALLOW 12⬙ [305 mm]
MIN. CLEARANCE
3 SIDES
Model Number
(-)PRL-
024JEC/036JEC/
048JEC/060JEC
Height “H”
(Inches) [mm]
33 [838] 443/8 [1127] 311/2 [800]
L
Length “L”
(Inches) [mm]
earth friendly refrigerant
ACCESS
PANE L
ALLOW 24⬙ [610 mm]
ACCESS CLEARANCE
Width “W”
(Inches) [mm]
16.0
Loading...