RF Technologies Application Disruption Alarm Installation And User Manual

Application Disruption Alarm

Installation and User Guide

0510-1084-C

Released 08/21/13

Copyright 2009, 2011, 2013 by RF Technologies, Inc.

All Rights Reserved. No Part of this work may be reproduced or copied in any form
or by any means without written permission from RF Technologies, Inc.

Users must read this Guide before using the Product.

Important Warnings

It is important for your facility to implement and enforce the following WARNINGS in
order to keep all equipment functioning properly. Disregarding the information and
instructions in this document is considered abnormal use and may result in injury or
system failure.

WARNING

ACCESSORIES (SUPPLIES)—To ensure patient safety and proper operation of
equipment, use only parts and accessories manufactured or recommended by RF
Technologies, Inc. Parts and accessories not manufactured or recommended by RF
Technologies, Inc. may not meet the requirements of the applicable safety and
performance standards.

Failure to use the components and supplies specified by RF Technologies, Inc. may
result in equipment and/or system failure.

WARNING

EXPLOSION HAZARD—This device should not be used in the presence of flammable gas
mixtures. It should also not be used in oxygen enriched atmospheres.

WARNING

INSTALLATION AND CONFIGURATION—It is the responsibility of the facility to
follow the installation instructions carefully, as outlined in the current Series Software
Administrator Guide, and to use the components and supplies specified by RF Technologies,
Inc. for all installations.

Failure to use the components and supplies specified by RF Technologies, Inc.
may result in equipment and/or system failure.

WARNING

INSTRUCTIONS FOR SET UP AND USE—It is the responsibility of the facility to
follow the instructions for set up and use carefully, as outlined in this manual, and to use
the components and supplies specified by RF Technologies, Inc. for set up and use. Do
not attempt to use extension cords or other equipment not supplied by RF Technologies,
Inc.

Failure to use the components and supplies specified by RF Technologies, Inc. may
result in equipment and/or system failure.

WARNING

PRODUCT WARRANTIES—Failure to follow the Warnings and Cautions in this
guide voids any and all Product Warranties.

WARNING

STATIC DISCHARGE—Do not touch the conductor portion of any conductor or
port. Damage to the device may result.