R for Rabbit HUNNY BUNNY Instructional Manual

INSTRUCTIONAL MANUAL

The Amazing Baby Company

HUNNY BUNNY

WARNING!

1. Never leave child unattended. Always keep child in view while in stroller.

2. To avoid serious injury from falling or sliding out. Always use seat belt. After fastening buckles, adjust belts
to get a snug t around your child.

3. Never carry more than one child at a time in the stroller.

4. Do not hang any items on the handles of the stroller as this makes the stroller unstable.

5. Ensure that children are clear of moving parts before making any adjustments to the stroller.

6. Ensure that all persons who operate this stroller know how to operate it safely.

7. Do not allow children to play with or hang on the stroller.

8. Do not use your stroller for anything other than its intended purpose.

9. Be careful when going up or down curbs, stairs, and escalators. Remove your child and fold the stroller
when going up or down stairs or escalators.

10. Your child is ready for this stroller if: He/She is at least 6 months old and no greater than 36 months old.

11 .Before use remove and dispose of all plastic bags and packaging material and keep them out of reach from
children.

12. Use the swivel wheel mode on smooth surfaces, we recommend you to lock the swivel wheels on uneven
surfaces.

13. Do not use any accessories, spare parts, or components that were not supplied by the manufacturer. They
may make the stroller unsafe.

14. Do not use the stroller if any part is lost or damaged.

15. Any unauthorized modications to this stroller will invalidate any manufacturer guarantees.

ASSEMBLY INSTRUCTIONS:

Step 1: Open the packaging and take all the parts out. There should be 8 sets of parts as shown in gure
below:

1. Stroller Frame

2. Brake

3. 2 Back Wheels

4. 2 Front Wheels

5. Carry Cot cum Seat

6. Bumper Bar

7. Cup holder

8. Leg Cover

Step 1: Open the stroller frame by pulling the frame
upwards as shown in Fig 1

Step 2: Insert the brake frame on the back side as
shown in g. below till you hear click sound.

Step 3: Insert the wheels in the frame as shown in gure
below

To remove front wheels push the button on the wheels
and pull out from the frame as shown below.

Step 4: Insert the front wheels as shown in gure below
till you hear click sound.

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

Step 5: Insert the frame of carry cot/ seat on the
stroller frame as shown in Figure below.

Step 8: To brake the stroller pull down the link brake
as shown in below g.

Step 6: Fix the bumper bar as shown below in the
seat/carry cot.

Step 7: Insert the cup holder as shown in gure
below on the hook

To remove the front wheels push the button the stop
of the frame as shown in g below.

Fig 10

Fig 7

Fig 8

Fig 9

Fig 6

Step 9: To Stop 360 degree rotation of the front wheels
pull down the swivel lock as shown in g below.

Step 10: Take out the belts from the side pockets and
x the belts as shown in Fig 12, 13 and 14. This is will
convert carry cot into seat position.

Step 11: To make the carry cot/seat recline, push the
button and pull down the frame. Seat will recline as
shown in below Fig.

Step 12: To adjust the handle bar push the button as
shown in below gure and adjust the handle position

Fig 11

Fig 12

Fig 13

Fig 14

Fig 15

Fig 16

Step 13: To reverse the carry cot/seat insert the seat in
reversible direction as shown in below g.

Step 14: To x the winter leg pad insert the zipper in the
frame of the stroller as shown in below g.

Step 15: To fold the stroller, pull the hooks on the handle
bar on both the sides and push the stroller forward to
fold it.

Step 16: To lock the frame after folding insert the lock
hook in the frame as shown in below g.

Fig 17

Fig 18

Fig 19

Fig 20

MAINTENANCE & CARE:

Clean the plastic parts of the pram with a damp cloth. Do not use abrasives or bleach.

Clean and lubricate the wheels, safety locks (where appropriate). For sliding parts use light oil or a silicon

spray.

Do not use heavy oil-based lubricants as this will attract dust and grit which tends to clog and damage

moving parts.

FABRIC CARE:

If the pram becomes wet, do not fold the hood when you take the pram indoors. Always leave the pram to

dry naturally and do not expose pram to strong heat sources like res, radiators and direct sunlight.

Whilst fabrics are carefully selected and tested, washing, wearing and exposure to direct sunlight may cause

the colour to fade or change.

The exposed edges of fabric covers are often the rst to wear and fray. Remember this when storing or

transporting your pram and accessories.

Light soiling to the pushchair can be removed with a damp sponge and a mild detergent.

WASHING INSTRUCTIONS:

Wipe only, do not use abrasives or bleach.

R for Rabbit Baby Products Pvt. Ltd.

G-508, Titanium City Center, Anand Nagar Road, Prahaladnagar,

Ahmedabad, Gujarat – 380015

Phone: [phone]

Email: [e-mail]

Website: www.rforrabbit.com

For support, complaints or feedback, please contact: