Hop a Little
The Bassinet cum Rocking Cradle
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
BS EN 1130-1:1997 Furniture-Cribs and cradle - Safety Requirements
WARNING
• Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the
rocking cradle are not compromised;
• This cradle was designed for an infant having a maximum weight of 9kg.
• Remove any tools or excess parts including plastic packaging from the cradle vicinity after
its assembly;
• Discontinue use of the rocking cradle before the infant can sit up by itself;
• Any padding and cushioning materials, including the mattress, to be sufficiently firm to
preclude conforming to the contours of the infant’s face;
• Ensure that the infants face is not positioned face down into the mattress;
• Ensure that proper ventilation is maintained in and around the cradle by limiting bed clothes,
extra pillows or toys;
• Ensure the rocking cradle is placed at a reasonable distance from curtains, blinds, heaters
and power points;
• Keep medication, string, elastic, small toys or small items such as money out of reach from
any position in the rocking cradle;
• Be aware that ribbons or lace associated with bedding may entangle the infant.
Recommended Mattress Size:
This cradle has been manufactured for use with a mattress which measures 450mm wide by
900mm long and 50mm in thickness.
CAUTION: RECOMMENDED MATTRESS SIZE. IT IS RECOMMENDED THAT THE MATTRESS USED IN THIS
ROCKING CRADLE BE A SNUG FIT AND NOT EXCEED 50 MM IN THICKNESS.
INSTRUCTIONS FOR ASSEMBLY
1. 2. 3.
4. 5. 6.
“press here”
To assemble the structure, the most convenient way is to put top frame on the floor (pic 1).
Then, join cradles legs in the direction shown in (pic 2 and 3). To assemble each leg
correctly it is necessary to push the red buttons situated on the ends of each leg towards the
frame. Esure the unlock systems are active like in the picture; after assembling this piece will
be situated to the left. (see leg assembly below)
The next step would be to lock the legs to the frame as shown in pic 4. Make sure this is done
for both legs. You would then need to add the mattress as shown in pic 5.
The fully assembled cradle should look like the one in pic 6.
Leg Assembly
When you hear the click
this means the leg is assembled
correctly
This cradle has 3 use positions: Rock ,Stop and Move.
Rock Position: Push the bottom legs of the cradle from the curved upright position
to the curved downwards position. As shown in Pics 1 and 2 you can push the position
of the leg from upwards to downwards with your foot or hand.
Stop Position: Push the bottom legs of the cradle from the curved downward position
to the upright position. As shown in Pics 2 and 1 it is a reverse of the steps for the rocking
position. You can just kick up the legs with your hand or foot.
Move position: Push the bottom legs of the cradle to the side position. As shown in
Pics 3 and 4 you can push the legs to the side and you can move the cradle around.
You can move the leg with your hand or foot.
Press this button when you need to turn the bottom over
to use as a rocker or to leave upright
CARE AND MAINTENANCE
All products have one year warranty from the date of purchase.
It is recommended to regularly inspect and maintain movement of locking
devices and security of essential components.
To prolong the life of your cradle keep it clean and do not leave it in direct
sunlight for extended periods of time.
Regularly check all parts for wear and tear. Lubricate if tight.
The fabric may be cleaned using warm water with a household soap or mild
detergent. Allow it to dry completely before re-use.
Non-removable fabrics and trims may be spot cleaned using a damp sponge
with soap or mild detergent. Allow it to dry completely before folding or
storing away.
Never clean with abrasive, ammonia based bleach based or spirit type
cleaners.
If the wheels become damaged or worn discontinue use and replace.
Mattress can be machine washed (30° maximum, neutral soap only)
Metallic and plastic parts can be hand washed with tepid water and neutral soap.
Do not use aggressive substances.
Contact Us
R for Rabbit Baby Products Pvt. Ltd.
A1-305, Palladium, Corporate Road,
Makarba, Ahmedabad, Gujarat,380051
India
http://www.facebook.com/therforrabbit
Loading...