RL-UM12BS V1.0
Product Specifications
WLAN 11b/g/n USB module (1T1R)
http://www.rf-link.net
Version: V1.0
Overview
UM12BS is a WLAN 11n USB module, which fully supports the
features and
Functional compliance of IEEE 802.11n,e and i standards. It
supports up to
150Mbps high-speed wireless network connections.
It is designed to provide excellent performance with low power
Consumption and enhance the advantages of robust system and
cost-effective.
It is targeted at competitive superior performance, better power
Management applications.
Features
*
Operates in 2.4 GHz frequency bands
*
1x1 technology improves effective throughput and range
existing 802.11 b/g products
* Data rates: up to 150Mbps
*
802.11e-compatible bursting and I standards
*
BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
*
WEP, TKIP, and AES, WPA, WPA2 hardware encryption schemes
http://www.rf-link.net
General Specification
Model
Product Name WLAN 11n USB module
Major Chipset Realtek RTL8188EUS
Standard 802.11b/g/n, 802.3, 802.3u
Data Transfer
Rate
Modulation
Method
Frequency Band
Spread Spectrum
RF Output Power < 13dBm@11n,< 18dBm@11b,< 14dBm@11g
Operation Mode Ad hoc, Infrastructure
Receiver
Sensitivity
Operation Range Up to 180 meters in open space
RL-UM12BS V1.0
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and
maximum of 150Mbps
BPSK/ QPSK/ 16-QAM/ 64-QAM
2.412~ 2.462 GHz
IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum)
IEEE 802.11g/n:OFDM (Orthogonal Frequency Division
Multiplexing)
11Mbps -86dBm@8%,54Mbps -73dBm@10%,130Mbps
-66dBm@10%
LED
OS Support
Security WEP, TKIP, AES, WPA, WPA2
Interface USB 2.0
Power
Consumption
Operating
Temperature
Storage
Temperature
Humidity 5 to 90 % maximum (non-condensing)
Dimension 12ˊ9032 x 12.1920 x 1.6mm (LxWxH) +-0.2MM
Windows 2000,XP32-64,Vista 32/64,Win7 32/64,Linux,Mac,
WIN CE
DC3.3V
Maximum power dissipation in 80MA
-20 ~ +60°C ambient temperature
-10 ~ 70°C ambient temperature
Android,
http://www.rf-link.net
Dimensions:
The PCB tolerances within + / -0.2 or so
PIN Definition
http://www.rf-link.net
Physical map
⊼˖៥ৌ
There are Red, Black, Yellow and Blue four color PCB for option. Above shows the Blue
㗗DŽ
PCB.
UM12BS
᳝㑶ǃ咥ǃ㪱ǃ咘ಯ⾡买㡆ⱘᵓˈϞߎϔ⾡㪱㡆կᅶ᠋খ
Packaging Appearance Figure
http://www.rf-link.net
External antenna reference design
http://www.rf-link.net
DC Characteristics
Symbol Parameter Minimum Typical Maximum Units
VD33A, VD33D 3.3V I/O Supply Voltage 3.1 3.3 3.5 V
VD15A, VD15D 1.5V Supply Voltage 1.4 1.5 1.6 V
IDD33 3.3V Rating Current - - 400 mA
http://www.rf-link.net
Power Consumption
Parameters Sym Conditions Min Typ Max Unit
3.3V Supply Voltage Vc33 3.1 3.3 3.5 V
1.5V Supply Voltage Vc15 1.4 1.5 1.6 V
Receiving Tests the biggest receive
3.3V Current Consumption Icc33rx H40MCS7 65 MA
3.3V Current Consumption Icc33rx
Transmission Biggest transmission
test
OFDM 54M
70 MA
3.3V Current Consumption Icc33tx H40 MCS7 80 MA
3.3V Current Consumption Icc33tx
The depth waits for an opportunity
Deep sleep
Icc33tx/rx 2MA
Ic33tx/rx 2 MA
OFDM 54M
85 MA
USB interface electrical characteristics
http://www.rf-link.net
Regulatory Information
The devices must be installed and used in strict accordance with the instructions as described in
the user documentation that comes with the product.
If the FCC identification number is not visible when the module is installed inside another device,
then the outside of the device into which the module is installed must also display a label referring
to the enclosed module.
This exterior label can use wording such as the following:
“Contains Transmitter Module FCC ID: A5LRTL8188EUS”
When the module is installed inside another device, the user manual of this device must contain
below warning statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This modular could be installed in the fix or mobile devices only, installed in the portable device,
e USB dongle is forbidden. This modular complies with FCC RF radiation exposure limits set
lik
forth for an uncontrolled environment. This trans
conjunction with any other antenna or transmitter. This modular must be installed and operated
with a minimum distance of 20 cm between the radiator and user body.
mitter must not be co-located or operating in
For manufacturer:
The end product into which the module will be installed should be the fix or mobile devices only,
the portable device, like USB dongle is forbidden.
The end product into which the module will be installed should be installed and operated with a
minimum distance of 20 cm between the radiator and user body.
Loading...