User's Manual
Please read this manual throughly and
follow the INSTALLATION procedures to
prevent any damage to the Video Splitter
or any connecting devices.
Introduction …………………………….
Introduction …………………………….
Introduction …………………………….Introduction …………………………….
The Video Splitt er s, VSA12 ,VSA14 and VSA18 broadcast
and boost one VGA signal source for 2, 4 or 8 VGA
monitors resp ective ly. T here is no sof tware o r i nterfac e
card to install. Just connect the cables, power up the
system and you are ready to h ave duplicated VG A images
for multiple monitors with excellent quality. Superb high
bandwidth circuit enables high-resolution VGA signal of
350Mh z to be displayed on m ultipl e m onitors.
Application: …………………………….
Application: …………………………….
Application: …………………………….Application: …………………………….
!"
presentations
!"
exhibits
!"
demonstration
!"
trade shows
!"
mon itor t es t in g and bur n-in
!"
busin es s m eet ings
Features …………………………………
Features …………………………………
Features …………………………………Features …………………………………
!"
Duplicat e one VGA input to m ultipl e VG A ou t puts.
!"
Effect ive transmission distance: 65M ( 210f t)*
!"
Autom atic power-save when VGA in put is lost.
!"
Applicable t o VGA, SVGA and mu l t i- sync m onitors.
!"
Cascaded operation f or increased VGA ou t puts.
!"
Crisp clear VG A images
*With UL-2919 rat ed VGA cabl es .
Connection …………………………….
Connection …………………………….
Connection …………………………….Connection …………………………….
One piece of HDB15 male-to-female cable is required to
connect from the Video Splitter Input to a computer's VGA
output. Multiple monitors should be connected to the
Video Splitter's output port s as shown below.
Figure 1 : VSA12 Connection
Figure 2 : VSA14 Connection
Figure 3 : VSA18 Connection
Operation ………………………………
Operation ………………………………
Operation ………………………………Operation ………………………………
►ACTIVE LED turns on wh
I nput por t .
►POWER LED turns on when the Video Splitter is
powered up by t he AC 9V power adapter.
Specification …………………………...
Specification …………………………...
Specification …………………………...Specification …………………………...
Function VSA12 VSA14 VSA18
Number of VGA
output
Signal bandwidth 350Mhz 300Mhz
Signal type VGA, SVGA, Multi-sync
LED POWER (green) x 1
Cable length 65M (210ft) Max.
- Output
Power consumption AC 9V, 200mA, normal operation
Enclosure Metal
Weight 400g 428g 720g
Dimension (mm) 20 x 85 x 180 40x196 x70
en t here is VGA signal at the
2 4 8
ACTIVE (amber) x 1
HDB15 male x 1 Connector - Input
HDB15
female x 2
10mA, power-save mode
HDB15
female x 4
HDB15
female x 8
Limited Warrant y
IN NO EVENT SHALL THE DIRECT VENDOR'S
LIABILITY FOR DIRECT OR INDIRECT, SPECIAL,
INCIDENTIAL OR CONSEQUENTIAL DAMAGES, LOSS
OF PROFIT, LOSS OF BUSINESS, OR FINANCIAL
LOSS WHICH MAY BE CAUSED BY THE USE OF THE
PRODUCT EXCEEDS THE PRICE PAID FOR THE
PDOCUDT.,
The direct vendor makes no warranty or representation, expressed
or implied with respect to the contents or use of this
documentation, and especially disclaims its quality, performance,
merchantability, or fitness for any pa rticular purpos e.
The direct vendor also reserves the right to revise or update the
product or documentation without obligation to notify any user of
such revisions or updates. For further information, please contact
your direct vendor.
All the brand names and registered trademarks are the property of
their respective owners.
Copyright 01/2002 Rextron Technology, Inc.
PP5-V7200-300
Printed in Taiwan
Loading...