this booklet would make
a really great coaster now don't you think?
- revolv inc. -
RECYCLING INFORMATION
If ever discarded, this product and it’s
packaging shall not be treated as
household waste. Instead, please
deliver it to the applicable collection
point for the recycling of electrical and
electronic equipment. By recycling this
product correctly, you will help
conserve natural resources and
prevent potential negative
environmental consequences.
Feel free to add “Captain Planet’s
Planeteer” to your resume. For more
detailed information about recycling of
this product, please contact your local
city office, your household waste
disposal service, the shop where you
purchased the product, or the
all-knowing interwebs.
REGULATORY INFORMATION
Any changes or modifications not
expressly approved by the
manufacturer may void the user’s
authority to operate the equipment
under FCC rules. This device complies
with part 15 of the FCC Rules.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that
may cause undesired operation. This
equipment has been tested and found to
comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which can
be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC’s RF
radiation exposure limits set forth for
an uncontrolled environment under the
following conditions:
• This equipment should be installed
and operated such that a minimum
separation distance of 20 cm is
maintained between the radiator
(antenna) & user’s/nearby person’s
body at all times.
• This transmitter must not be
co-located or operating in
conjunction with any other antenna
or transmitter.
- the nitty-gritty -
Revolv Inc.
Version 08 27 2013
Hub
SETUP AND INSTALLATION GUIDE
1. Place the Hub in a central location to
achieve the best wireless coverage
for the entire home.
2. Plug the power adaptor into the Hub
and a wall socket.
3. Download the smart phone
application from the Apple App
Store.
4. Follow App’s on-screen instructions.
5. Get jiggy with it. (Optional)
PRODUCT REQUIREMENTS
1. Smart phone running iOS 6.0 or
greater. For complete details go to
help.revolv.com.
2. DSL/cable modem, or LAN-based,
high-speed Internet connection.
3. WiFi access point.
4. If you currently have a cable or DSL
modem connected directly to your
computer, you should install a WiFi
router between your modem and
your computer to share the Internet
connection with the computer and
other devices. If you do not have a
router, you should purchase and
install one before proceeding.
IMPORTANT SAFETY INFORMATION
1. Read, keep, heed and follow all
instructions.
2. Warning: To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture. Do
not use this apparatus near water or
in wet locations. e.g. bathrooms or
outdoors.
3. Clean only with dry soft cloth.
Household cleaners or solvents can
damage the finish. Do not block any
ventilation openings.
4. Install in accordance with the
manufacturer’s instructions.
5. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus that
produce heat.
6. Protect the power cable from being
walked on or pinched, particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
7. Only use attachments/accessories
specified by the manufacturer.
8. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
9. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
when the power-supply cable or
plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, and does
not operate normally, or has been
dropped.
10. The plug should be readily available
to disconnect the equipment.
11. Do not expose apparatus to dripping
or splashing and do not place objects
filled with liquids, such as vases, on
the apparatus.
12. This device is not as a toy for usage
by children. Unless you’re a child at
heart. That’s fine by us.
13. This device is not for use in
safety-critical applications (such as
life support) where a failure of the
product would reasonably be
expected to cause severe personal
injury or death.
TROUBLESHOOTING GUIDE
Please go to help.revolv.com to learn
more about troubleshooting the Hub.
POWER SPECIFICATION
5.0V DC @ 1.0A.
Use only the supplied and approved
power supply.
WIRELESS SPECIFICATION
Wireless RF mode frequency bands
2400 – 2483.5 MHz
902 – 928 MHz
431 - 437 MHz
ENVIRONMENTAL SPECIFICATION
Operation temperature: 32F to 95F (0C
to 35C)
Storage temperature: -13F to 140F
(-25C to 60C)
Relative humidity: 5 to 95%
non-condensing
Loading...