Revolabs Solo Personal Microphone Charger User Manual

Solo Personal

Solo Personal Microphone Charger

Solo PersonalSolo Personal

Congratulations on your purchase of the Solo Personal Microphone Charger. This unit is designed to
charge the 5 volt battery in all Revolabs Solo™ Executive microphones (01-EXEMIC, 03-EXEMICEU,
05-TBLMIC, 05-TBLMICEU, 06-XLRMIC and 06-XLRMICEU). This is particularly useful in applications
where a particular microphone needs to be at a fixed location even while charging, such is in a
boardroom, where microphone audio has been adjusted for specific meeting participants.

The charger power adapter can be connected to any standard 100-240V AC outlet. Note: power
adapter plug-type varies by country.

To use the Solo Personal Microphone Charger:

Microphone Charger

Microphone Charger Microphone Charger

Users Guide

Users Guide

Users GuideUsers Guide

Step One:

Step Two:

Step Three:

Warranty

Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 1 year after purchase.

System Specifications

Dimensions, (L, W, H):

3.9” (10 cm) x 2.4” (6 cm) x 1.0” (2.56 cm), 0.5 lb (0.23kg)
Environmental Requirements:
Temperature: 40° to 105° F (5° to 40° C)
Operating Humidity: 20% to 85%

Version 1.4

Plug the AC adapter into an AC outlet.

Attach the AC Adapter cable to the connector in Personal Microphone Charger Base.

Insert the Microphone into the Charger Base. The microphone will perform a short self-test (flashing
LEDs) and then begin charging. The microphone does not transmit audio while charging. Note: The
battery will NOT overcharge if left in the Charger.

Shipping Weight: 1.5 lbs (0.68 kg)

Power Requirements

Input: 100-240VAC, 50-60Hz, 300mA
Output: 5 VDC, Regulated (proprietary 4 pin connector)
Battery Type: Lithium Polymer
Models: 02-DSKSYS-C, 04-DSKSYSEU-C