Revolabs Solo Executive Tabletop Microphone User Manual

Revolabs Quick Start Guide

Using a Solo TableTop Wireless Microphone

Remove the microphone from the Charger Base.

Step #1

Step #2

The microphones turn on and mute themselves
automatically when removed from Charger Base
(flashing RED LED) to prevent handling noise while
placing the microphone on the table.

The TableTop microphone should be centered on
the table in front of users, between 2 to 5 feet (.75
to 1.75m) away. It is always better to put the
microphone as close as possible to the person
speaking, but avoid placing the microphone where
it might be blocked by laptops or paperwork.

2 to 5 feet (.75 to 1.75m)

Step #3

Step #4

With the microphone in position, un-mute the
microphone by pressing and releasing the MUTE
button (confirm by viewing flashing GREEN LED).

To turn microphones off, first mute the microphone,
and then plug it into the Charger Base. Make sure the
RED LED turns on. Optionally, the microphone can
be turned off manually. Simply press and hold the
MUTE button for ~10 seconds until the LED turns
solid RED and release button.

You are now ready to experience wireless, rechargeable and

secure (encrypted) collaborative freedom.

Rev olabs Inc • 6 3 Gr eat Road , Ma ynard , MA 01754 • 1 -800-3 26-10 88 • w ww.r evol abs.c om • info @revo labs.c om

Flashing red = muted

Flashing green = un-muted

Mute/un-mute toggle button

QSG-T TM-v1. 0-2007