Revolabs Solo Executive Always-On Charger User Manual

Always

Always----On

AlwaysAlways

Congratulations on purchasing the Always-On Solo Wireless Boundary Microphone Charger—designed
to charge the battery in Revolabs Solo™ TableTop microphones (05-TBLMIC, 05-TBLMICEU) from any
AC outlet. This is useful when microphones are used for more than 8 hours, or haven’t been charged.

The connector accepts the supplied power adapter that converts power from any standard 100-240V
AC outlet to 5 volts DC. Note: power adapter plug-type varies by country.

To use the TableTop Microphone Charger:

On Solo Wireless Boundary

Solo Wireless Boundar y Microphone Charger

On On

Solo Wireless Boundar ySolo Wireless Boundar y

Users Guide

Users Guide

Users GuideUsers Guide

Microphone Charger

Microphone Charger Microphone Charger

Step One:

Step Two:

Step Three:

Warranty

Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 1 year after purchase.

System Specifications

Dimensions, (L, W, H) and Weight

2.0” (5.0 cm) x 1.3” (3.4 cm) x 0.9” (2.4 cm), 0.1 lb (0.06 kg)
Environmental Requirements:
Temperature 40° to 105° F (5° to 40° C)
Operating Humidity 20% to 85%

Rev 1.5, 10/07

Plug the AC adapter into an AC outlet.

Attach the AC Adapter cable to the connector in TableTop Microphone Charger Base.

Insert the Microphone into the Charger Base.

The microphone will take several seconds to establish wireless communication with the base
station before capturing audio, indicated by self-test LED activity on the Microphone. Press the
microphone Mute button to un-mute. Note: The battery will NOT overcharge if left in the Charger.

Shipping Weight: 1.5 lbs (0.68 kg)

Power Requirements

Adapter Input: 100-240VAC, 50-60Hz
Adapter Output: 5 VDC, 300mA
Models: 05-TBLCHG-C, 05- TBLCHGEU-C