Revolabs Single Channel System — LifeSize Team MP User Manual

Revolabs Single Channel System — LifeSize Team MP Setup Guide

This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a LifeSize Team MP video codec.

Note:

It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Single Channel System

2. LifeSize Team MP video codec

3. QTY 1 2.5mm to RCA adapter cable (provided with Single Channel System)

Connecting the Cables

1. Connect the 2.5mm to RCA adapter cable from the 2.5mm AUDIO port on the
Single Channel System to the L AUDIO IN port on the LifeSize Team MP

1

Configuring the LifeSize Team MP Video Codec

1. Push the BLUE button on the remote control for SYSTEM MENU

2. Select ADMINISTRATOR PREFERENCES and enter password (if necessary)

3. Select AUDIO

4. Select LINE IN (AEC)

5. Adjust ACTIVE MICROPHONE VOLUME to 10