Revolabs Single Channel System — LifeSize Room User Manual

Revolabs Single Channel System — LifeSize Room Setup Guide
This setup guide will guide you through the steps needed to properly connect a Revolabs Single Channel System to a LifeSize Room video codec.
Note:
It is important to carefully follow these instructions in order and completely. Otherwise your Single Channel System and/or the video codec may not function properly. Please read through these instructions completely before proceeding. Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single Channel System
2. LifeSize Room video codec
3. QTY 1 2.5mm to RCA adapter cable (provided with Single Channel System)
Connecting the Cables
1. Connect the 2.5mm to RCA adapter cable from the 2.5mm AUDIO port on the Single Channel System to the black AUDIO IN port on the LifeSize Room
1
Configuring the LifeSize Room Video Codec
1. Push the BLUE button on the remote control for SYSTEM MENU
2. Select ADMINISTRATOR PREFERENCES and enter password (if necessary)
3. Select AUDIO
4. Select LINE IN (AEC)
5. Adjust ACTIVE MICROPHONE VOLUME to 10
Loading...