Revolabs Single Channel System — LifeSize Express User Manual

Revolabs Single Channel System — LifeSize Express Setup Guide

This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a LifeSize Express video codec.

Note:

It is important to carefully follow these instructions in order and completely.
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.

Requirements for connecting systems:

1. Revolabs Single Channel System

2. LifeSize Express video codec

3. QTY 1 2.5mm to RCA adapter cable (provided with Single Channel System)

4. QTY 1 3.5mm stereo male to RCA female adapter* (Radio Shack 274-378)

* Optional Item

Connecting the Cables

1. Connect the 2.5mm to RCA adapter cable to the 2.5mm AUDIO port on the
Single Channel System

2. Connect the RCA female to 3.5mm adapter to the blue RCA plug on the
previously mentioned cable

3. Connect the 3.5mm plug into the LifeSize Express LINE IN

1

2

3

Configuring the LifeSize Express Video Codec

1. Push the BLUE button on the remote control for SYSTEM MENU

2. Select ADMINISTRATOR PREFERENCES and enter password (if necessary)

3. Select AUDIO

4. Select LINE IN (AEC)

5. Adjust ACTIVE MICROPHONE VOLUME to 10