Revolabs QSG-TTM User Manual

Revolabs Quick Start Guide

Using a Solo TableTop Wireless Microphone

Remove the microphone from the Charger Base. The microphones

Step #1

Step #2

turn on and mute themselves automatically when removed from
Charger Base (flashing RED LED) to prevent handling noise while
placing the microphone on the table.

The TableTop microphone should be centered on the table in front of
users, between 2 to 5 feet (.75 to 1.75m) away. It is always better to
put the microphone as close as possible to the person speaking, but
avoid placing the microphone where it might be blocked by laptops
or paperwork.

2 to 5 feet (.75 to 1.75m)

Step #3

Step #4

With the microphone in position, un-mute the microphone by
pressing and releasing the MUTE button (confirm by viewing
flashing GREEN LED).

To turn microphones off, first mute the microphone, and then plug
it into the Charger Base. Make sure the RED LED turns on.
Optionally, the microphone can be turned off manually. Simply press
and hold the MUTE button for ~10 seconds until the LED turns solid
RED and release button.

You are now ready to experience wireless, rechargeable and

secure (encrypted) collaborative freedom.

Flashing red = muted

Flashing green = un-muted

Mute/un-mute toggle button

QSG -TT M-v 1.0 -20 07

Revolabs Inc • 6 3 Great Road, Maynard, MA 017 54 • 1-800-326-1088 • www.rev ol ab s. com • [e-mail]