Revolabs KX-NCP500, KX-TDE100, KX-TDE600, KX-TDE200, KX-NCP1000 User Manual

Technical Note

FLX – VoIP Registering with Panasonic

KX-TDE100, KX-TDE200, KX-TDE600, KX-NCP500, KX-NCP1000

Date: April 6th, 2012

This technical note gives a detailed description on how to register a Revolabs FLX conference phone with

a Panasonic IP PBX. In the management interface of the Panasonic IP PBX a SIP extension and user has

to be created. Once that user is created, the FLX can be set up to register with the Panasonic IP PBX.

To perform the tasks described in this document, the user needs to have administrative rights on the

Panasonic PBX. While the steps in this document are not difficult, we recommend that a trained

administrator should perform them.

1 | Page

FLX & Panasonic Technical Note

Configuring the Panasonic PBX for FLX Registration

If you do not have SIP enabled yet on your system, you need to add a virtual SIP card (SIPEXT32 Virtual

Card) to the PBX if you do not have one yet. This is done on the System Management – Configuration

page.

2 | Page