Revolabs HD Single User Manual
Box Contents
NOTE: Revolabs Wireless Microphones Ship in Separate Box(es)
How to Assemble
1. Plug a power clip into each power supply.
2. Plug a power supply into Charger Base and another into Base Station.
3. Plug all power cords into electrical outlets.
4. Plug the 3.5 mm end of the cable(s) into Base Station. If needed, plug 3.5 mm to RCA
adapter into one end of the cable.
5. Plug cable(s) into AV equipment.
6. Pair Revolabs Wireless Microphone(s) to Base Station using the pairing instructions.
7. Place microphone(s) into Charger Base.
OR
HD Single Charger Base HD Dual Charger Base
HD Single/Dual Base Station
3.5mm to 3.5mm cable
HD Single: Quantity 1
HD Dual: Quantity 2
3.5mm to RCA adapter
HD Single: Quantity 1
HD Dual: Quantity 2
Universal power supply
plus plug
Quantity 2
Technical Support 9:00 a.m. to 5:00 p.m. EST 1–800–326–1088
support@revolabs.com www.revolabs.com
How to Configure Basic Settings
Refer to HD Single/Dual Channel User Guide on www.revolabs.com
Technical Support 9:00 a.m. to 5:00 p.m. EST 1–800–326–1088
support@revolabs.com www.revolabs.com
DIP Switch Feature Off (Default) On
1 Output Mixing Individual Outputs Mixed Output
2 Low Pass Filter No LPF LPF
3 Audio Output Level Line Level Mic Level
4 Mute Local Mute No Local Mute
Flat
High
Boost
Bass
Boost
Dynamic
5
Microphone EQ Off On Off On
6
Microphone EQ Off Off On On
150' 100' 50' 15'
7
Transmit Power Off On Off On
8
Transmit Power Off Off On On
Configuration DIP Switches
3.5mm Output Connectors
3.5mm Input Connectors
Power
Mini
-
USB Serial Interface
Regulatory Information (full information in User Guide)
for Firmware Updates Only
2950085-03 Rev_3.0
Loading...