Revolabs AVAYA 2490 User Manual

Revolabs Solo™ Single-Channel System – Polycom® SoundStation2 Avaya
2490 Setup Guide

NOTES AND CAUTIONS:

This setup guide will guide you through the steps needed to properly connect a
Revolabs Solo Single-Channel System to a Polycom SoundStation2 Avaya 2490
speakerphone.

1. Connecting the Cables

2. Configuring the SoundStation2 Avaya 2490 speakerphone

Note: It is important to carefully follow these instructions in order and completely. Otherwise,
your Single-Channel System and/or the phone may not function properly. Please read through
these instructions completely before proceeding. Contact Revolabs Technical Support if you
have any questions.

IMPORTANT: This will only work with the SoundStation2 Avaya 2490 with LCD screen
(expandable version – P/N 2305-16375-001). SoundStation2 models without LCD screen or the
expandable capability do not have the ability to activate an external wireless microphone.

Requirements for connecting systems:

1. Revolabs Single-Channel system

2. Polycom SoundStation2 Avaya 2490 speakerphone with LCD screen

3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single-

channel system)

Connecting the Cables

CONNECTING A REVOLABS FUSION TO SOUNDSTATION2 AVAYA 2490 SPEAKERPHONE

1. Connect Single-Channel to SoundStation2 Avaya 2490 Auxiliary Audio Port using

Revolabs 2.5mm to RCA cable