System Components ................................................................................................................................ 3
Installing the Revolabs HD ™ Base Station .................................................................................................. 4
Controls and Connections: ....................................................................................................................... 4
Configuring the Revolabs HDTM Base Station ............................................................................................... 5
Using the Rear Panel Configuration DIP Switches .................................................................................. 6
Revolabs HD Microphones and HD Microphone Adapters ........................................................................... 7
Using the HD Wearable Wireless Microphones ....................................................................................... 7
Using the HD Omni-Directional Tabletop Wireless Boundary Microphones ............................................ 9
Using the HD Directional Tabletop Wireless Boundary Microphones .................................................... 10
Using the HD XLR Microphone Wireless Adapter .................................................................................. 11
Using the HD Wireless Adapter for Countryman Microphone ................................................................ 12
Pairing Wireless Microphones to Base Station....................................................................................... 13
Revolabs HDTM Single or Dual Charger Base............................................................................................. 14
Power Module ......................................................................................................................................... 14
Charging the Microphone Batteries ........................................................................................................ 14
Updating the Revolabs HDTM Firmware ...................................................................................................... 15
Index ............................................................................................................................................................ 19
Safety and General Information
Please read the following information to ensure safe and efficient use of your Revolabs system.
FCC User Information
FCC Registration Number: 0014898290
FCC ID: T5V02HDTRX Revolabs HD™ Dual Base Station
FCC ID: T5V01HDEXEMIC Revolabs Executive HD ™ Microphone
FCC Notice to Users
Users are not permitted to make changes or modify the equipment in any way. Changes or modifications not
expressly approved by Revolabs, Inc. could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE: Federal Communications Commission (FCC) Radiation
Exposure Statement
This equipment complies with FCC radiation exposure limits for an uncontrolled environment.
Professional Installation Recommended
This product should be professionally installed.
Industry Canada Notice to Users
Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device
IC: 6455A-02HDDUALNM Revolabs HD™ Dual Base Station
IC: 6455A-01HDEXEMIC Revolabs Executive HD ™ Microphone
Restricted use with certain medical devices
Hearing Aids
Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult
with your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
- 1 -
Export Law Assurances
04-HDSGLEU-NM
HD Single Channel System, 1-Channel, w/o mics
04-HDDUALEU-NM
HD Dual Channel System 2-Channel, w/o mics
03-HDEXEMICEU-11
HD Microphone, Wearable
03-HDTBLMICEU-OM-11
HD Microphone, Tabletop, Omni-directional
03-HDTBLMICEU-DR-11
HD Microphone, Tabletop, Directional
03-HDXLRMICEU-11
HD, XLR Wireless Adapter for Dynamic Handheld Microphone
03-HDCOMANEU-11
HD Wireless Adapter for Countryman Microphone
This product is controlled under the export regulations of the United States of America and Canada. The
Governments of the United States of America and Canada may restrict the exportation or re-exportation of this
product to certain destinations. For further information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use
of these products.
02-HDSGL and 02-HDDUAL (1 & 2 channel systems respectively) North America
UPCS Usage Restriction
Due to the UPCS frequencies used, this product is licensed for operation only in the United States of America
and Canada.
04-HDSGLEU and 04-HDDUALEU (1 & 2 channel systems respectively) European
Union Usage Restriction
Due to the DECT frequencies used, this product is licensed for operation only in the European Union
countries.
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC ―Radio Equipment and
telecommunications Equipment.
Model Numbers:
Standards to which Conformity is declared:
RF ETSI EN 301 406 V 1.4.1 03/2001
EMC ETSI EN 301 489-6 v1.2.1 (2002-04)
WEEE Notification:
The Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC) is intended to promote
recycling of electrical and electronic equipment and their components at end of life.
The products referenced herein are in compliance with the EU directive 2003/11/EC and EU directive
2002/95/EC.
- 2 -
Introduction
Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes
1.9 GHz DECT technology, and high band-width audio from multiple wireless microphones, enabling
clear, reliable, un-tethered communications in recording, audio/video conferencing, speech
recognition, VOIP communications, sound re-enforcement as well as many other environments
requiring clear audio capture.
The Revolabs HD™ Single and Dual Channel Wireless Microphone Systems have high definition
audio, 50 Hz to 20 kHz, which allows the systems to pick up the entire human voice spectrum.The
HD Single and Dual Channel Systems are a unique marriage of innovative technology and ergonomic
design, employing Multi-Carrier Time Division Multiple Access and Time Division Duplex
(MC/TDMA/TDD) radio transmissions both to and from the microphone.
This technology allows the microphones to co-exist with other wireless products such as wireless
LANs (802.11b&g), and includes digital encryption technology to ensure secure communications.
System Components
Depending on which system you’ve purchased, your Revolabs HD™ System contains the following:
Mountable Single or Dual Channel Base Station
Single or Dual Channel Microphone Charger Base
HD Wireless Microphones, purchased and boxed separately
The Base Station houses the processor and one end of the wireless connection. It features one set of
PCB diversity antennae and offers individual line-level or mic-level audio in/out for each microphone
channel.
This allows for external audio processing such as:
Mixing
- 3 -
Acoustic echo cancellation (AEC)
1 2 3 4 5 6 7
Feedback elimination
Level control
Equalization
Noise cancellation
The system is designed to optimize audio capture/reproduction by providing:
Consistent audio input from all participants
Minimum room noise
Mute control
Wireless encryption
Automatic channel selection
Full duplex audio
The Charger Base charges the HD Wireless Microphones and stores them when not in use.
Installing the Revolabs HD ™ Base Station
The Revolabs HD ™ Channel Base Station, shown below in front and rear panel views, manages
wireless audio signal processing, pairing, and muting between the Revolabs microphones and the
Base Station.
Front View
Rear View
Controls and Connections:
1. Channel LED indicators: Displays microphone mute and pairing states
2. Pairing Push Buttons: For pairing microphones to Base Station
3. Power In Receptacle (100-240 VAC)
4. 3.5mm Balanced Input Connectors
5. 3.5mm Balanced Output Connectors
6. Mini-USB Serial Interface
7. Configuration DIP Switches (see Section Using the Rear Panel Configuration DIP switches)
- 4 -
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.