Quick Installation Guide
Smart Sense Kit
for Smart Sensor Gateway User Manual
About
Thanks for your choice of Revogi Smart Sense Kit. This is a quick
installation guide for you. Please read this entire guide attentively
before using our products. Revogi Smart Sense Kit centers on
Smar t S enso r G atew ay, co-w orks wi th Door Senso r, Motion
Sensor, Smart Button and Smoke Detector. After some simple
configurations, one can use Smart Sense Kit to remotely monitor
indoor temperature, humidity, pressure, ambient light, noise level, etc,
cooperate with other Revogi devices to bring safety and smart life into
your home.
Smart Sensor Gateway
Door Sensor
MotionSensor Smart Button
Smoke Detector
Specification
Smart Sensor Gateway
Model: SGW001
Power Source: DC 5V1A
Humidity Measurement: 5 to 95% RH, Tolerance: ±4%
Pressure Measurement: 300 to 1200mbar, Tolerance: ±3mbar
Ambient Light Measurement: 0-83000lux, Tolerance: ±3%
Noise Measurement: 30-130db, Tolerance: ±3%
Communication Protocol: WiFi-868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Door Sensor
Model: SSW002
Power Source: CR2032 (included)
Battery Lifespan: 5years(10 times trigger per day)
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Motion Sensor
Model: SSW003
Power Source: AA size, LR6 type, 2PCS (included)
Battery Lifespan: 2 years (100 times trigger per day)
Field of View/ Focal Length: 120 degrees, 5M
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Smart Botton
Model: SSW004
Power Source: CR2032 (included)
Battery Lifespan: 5years(10 times trigger per day)
Range: 70M, 230Ft Min.(depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Smoke Detector
Model: SSW005
Power Source: 6LR61 9V (included)
Battery Lifespan: 5 years
Range: 70M, 230Ft Min. (depending your home's construction)
Communication Protocol: Proprietary 868MHz
Operating Temperature: 32 to 104°F, 0 to 40°C (indoor only)
Product Introduction
Smart Sensor Gateway
Revogi Smart Sensor Gateway features the control center of the Smart
Sense Kit, and the sensors can be linked with more smart devices via
Smart Gateway.
Touch Button
Reset Button
Door Sensor
Monitor doors and windows by sensing opening and closing between
the main part and the magnet.
Magnet Main Part
Loudspeaker
Light Induction Zone
Indicator
Indicator
Pairing Button
Motion Sensor
Sense the movement in the surrounding environment by infrared
detection.
Indicator
Pairing Button
Smart Button
Trigger the Smart Sensor Gateway to ring door bell by pressing the
button.
Indicator
Pairing Button
Smoke Detector
Trigger the Smart Sensor Gateway to alarm when detecting any
smoke.
Indicator
Reset Button
Pairing Button
Indicator
Indicator
Smart Sensor
Gateway
Smart Button
Smoke Detector
Description
Quick green flashing
(4 times per sec)
Stays green for 5s then off
Slow green flashing
(twice per sec)
Quick blue flashing
(4 times per sec)
Stays blue for 5s then off
Blue flashing(once)
Blue flashing(once)
Blue flashing(once)
Red flashing
Button
Button Function
Smart Sensor
Gateway
Smart Button
Smoke Detector
Touch Button
Reset Button
Pairing Button
Pairing Button
Pairing Button
Pairing Button
Reset Button
Slight touch: De-alerting
Long touch: Entering pairing mode
Long press till green light flashes quickly
Press to pair
Press to pair
Press to pair
Press to pair
Press to stop the alarm
Status
Ready for connect
network
Device successfully
connected with router
Connecting network
Ready for paring sensor
New sensor pairs
successfully
Open / Close
Trigger
Ring
Alarm
Quick Instruction
1. Download APP
Scan with your smartphone or tablet or search for "RevogiHome"
in the App Store or Google Play.
Download RevogiHome, sign up or log in directly.
Android: more than 800x480 resolution, Android 4.3+;
iOS: iOS8.0+
2. Plug into the power outlet
3. AddSmart Sensor Gateway
Make sure your smartphone or tablet is connected to the Wi-Fi. Tap
Add new device below the app page and select Smart Sense, then
follow the prompts to configure your device.
4. AddSensors
Put finger on the Touch button of the Smart Sensor Gateway or tap Add
New Sensor in the Smart Sense page to start the pairing, then use a
needle to press the paring button on the sensor, an voice prompt
"The sensor is paired" and the gateway indicator stays blue will
indicate the pairing successful.
Smart Button
Motion Sensor
Door Sensor
Smoke Detector
9V
Smart Button
1. Op en b ac k co ve r
2. Take off t he i ns ul at in g sp ac er
3. Co ls e ba ck c ov er
1. Lo ad b at te ry w it h 2p cs A A 2. Mo un t th e br ac ke t, S ce w on
5m
120°
5m 5m
5m
120°
Door SensorMotion Sensor
1. O pe n ba ck c ov er
3. Co ls e ba ck c ov er
2. Take off t he i ns ul at in g sp ac er
4. Le ss t ha n 22 mm
Smoke Detector
1. Open the back cover 2. Load the 6LR61 9V battery
3. Close back cover
For te chn ica l sup por t ple ase v isi t:w ww. revo gi. com /su ppo rt
Or ema il: sup por t@r evogi.c om
4. Mount on ceiling
9V
FCC Par
t 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
FCC Part 15.105 Warning Statement
Note:This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your body.
Loading...