Revo REVDN700E-2 User Manual

INSTRUCTION MANUAL

REVDN700E-2

Super High Resolution

Day & Night Color Camera

(Optional WDR)

VP-DOME

INDOOR

-DOME

LIMITATION OF LIABILITY

THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL
RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY
CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION
CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS
OR NEW EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE
SUCH CHANGES

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT
ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS
OR OTHER OPENINGS ON THE EQUIPMEMT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficien
shock to persons.

t magnitude to

The exclamation point within an eq
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

constitute a risk of electric

uilateral is

3

FCC COMPIANCE STATEMENT

FCC INFORMATION : This equipment has been tested and found

to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the

interference at his own expense.

CAUTION : Changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-

003 du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.

4

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the m
anufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plu
g. A polarized plug has two blades with one wider than the other. A gro
unding type plug has two blades and a third grounding prong. The wid
e blade or the third prong are provided for your safety. If the provided p
lug does not fit into your outlet, consult an electrician for replacement o
f the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from th
e apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or t
able specified by the manufacturer, or sold with th
e apparatus. When a cart is used, use caution wh
en moving the cart/apparatus combination to avoi
d injury from tip-over.

13.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has bee
n damaged in any way, such as power-supply cord or plug is damaged,
liquid has been moisture, does not operate normally, or has been drop
ped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE B
Y QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RIS
K OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OT
HER THAN THAT CONTAINED IN THE OPERATING INSTRUCTION
S UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Liste
d Class 2 power source only.

5

PRECAUTI

Before installation, carefully read the manual to ensure correct operation and setup,
heeding all warnings and instructions.

Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.

Ensure manual is kept in good condition for future use.

Do not install the device near any heat sources such as radiators, heat registers, stoves,

or other equipment (including amplifiers) that produce heat.

Only use attachments/accessories specified by the manufacturer.

Should any liquid get into the housing, immediately disconnect the device from the
power supply and have it checked by authorized personnel before reusing.

Do not install the device in a place of high humidity or where exposed to gas or oil.

Installation and servicing by authorized personnel only, adhering to local safety
regulations.

Unless you are an authorized technician, never try to dismantle the device. To avoid
electric shock, never remove the screws or covers.

If a camera, do not expose the device to radioactivity. It will cause serious damage to
the CCD.

Use Certified/Listed Class 2 power source only.

ONS

Cleaning

Clean the device with a slightly damp soft cloth. Use a mild household detergent. Never
use strong solvents such as thinner or benzene as they might damage the finish of the
unit.

6

TABLE OF CONTENTS

CONTENTS OF PACKAGE ------------------------------------------------------------------------- 7

INTRODUCTION ---------------------------------------------------------------------------------------8

CAMERA CONNECTIONS -------------------------------------------------------------------------- 9

INSTALLATION -----------------------------------------------------------------------------------------10

LENS ADJUSTMENT --------------------------------------------------------------------------------- 12

CAMERA OVERVIEW -------------------------------------------------------------------------------- 13

CAMERA ADJUSTMENT ---------------------------------------------------------------------------- 14

EXTERNAL DIMENSION ---------------------------------------------------------------------------- 23

SPECIFICATIONS -------------------------------------------------------------------------------------25

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.

Carefully remove the colour camera and its accessories from the carton and verify that
they were not damaged in shipment.

The content of the package includes:

1. Camera in Housing

2. This Manual

3. Accessory Kit for Installing

4. Drilling guide label

7

INTRODUCTION

The camera provided high-quality image using SONY 1/3” CCD and digital signal
processing LSIs.

Features:

 1/3" Super-HAD CCD
 Super high-resolution (700TVL)
 Wide Dynamic Range (~x512) (Optional)
 Day & Night(Auto, Manual, External, Filter delay, Change level adjust)
 0.1Lux(Color), 0.01 Lux(BW) @ F1.2 50IRE
 Auto Electronic Shutter [1/50(60) ~ 1/100,000] and manual electronic shutter

modes [1/50(60) ~ 1/10,000]

 Sens-Up (~x256)
 2D-NR, 3D-NR
 UDF Function(Ultra Deep Field)
 Multi Camera Configuration Set (4-Sets/Night Profile, Ext DN Profile)

 PVA/PVA+ (Personal Video Analytics)

 Very High Configurable.
 Various Detection Methods(Motion, Loitering Object, Abandon, Scene

Change, Unfocus, Windy Area)

 Various Zone Event Detection Methods, and Event Area Combinations.
 8 Objects Trace, 4 Objects Display

 Concurrent Processing with All Detections, and All Objects.

 Two Counting Block.
 Event String Sending (Editable String)
 Digital Tracking(Using D-PTZ)

 Various Detection Area(MAX. 10 area, Line, Rectangle, 4-Point polygonal)
 Back Light Compensation (EHLC, Auto, Spot)
 i-Freeze Function(Reduce recording space)
 Privacy Mask or Mosaic(MAX. 10 area/4-point polygonal/transparency)
 Digital Image Stabilization.
 Digital PTZ
 Digital Effect (H/V reverse, 180 degree rotate, inverse, freeze)
 Smart IR (30no 850nm IR)
 White Pixel Removal.
 Focus Aid Function.
 Color Rolling Suppression.
 System Lock (4-character password)
 Auto and Manual white balance modes
 Support Line-Lock external synchronization
 RS-485 Remote camera control
 Multi-Language
 User Certified / Listed Class 2 power source only
 Operates in 12VDC or 24VAC
 IP66 (VP DOME)

8

CAMERA CONNECTIONS

Connection Cable Description

COLOR Description

RED AC24V/DC12V

WHITE AC24V/DC12V

BLUE RS485(-)

GREEN RS485(+)

YELLOW ALARM OUT

GRAY DN EXT-IN

BLACK&WHITE DN EXT-OUT

BLACK GND

SKY BLUE UTP+(Option)

PINK UTP- (Option)

1) External Day/Night Control

Select Day/Night mode using external equipment, by connecting control lines to the
appropriate terminals.

 DAY&NIGHT EXTERNAL INPUT

Switches the cameras D/N mode to either Day or Night based on the input
status. Refer to the diagram below. The cameras D/N mode must be set to
EXT for this to function.

Black

 DAY&NIGHT OUTPUT

The camera turns on an external IR LED Lamp by detecting the sensitivity on the AGC
level when the D&N mode is set "AUTO" on the OSD menu of the camera.

Black&White

GND

DAY&NIGHT INPUT Gray

– Open Collector (5V/10mA)

DAY&NIGHT OUTPUT

GNDBlack

‘

2) Alarm Out

– Open Collector (5V/10mA)

 Motion detection signals are output through this port. (YELLOW AND GND)
 Active state is configurable.

3) Power Input Terminal

 RED & WHITE : These terminals accept 24VAC or 12 VDC. When using 12VDC

it is recommended to use a DC power supply that can support an inrush current
of 0.55A

4) Camera Control

 GREEN : RS 485+
 BLUE : RS 485-

5) UTP (Option)

 Video signal through out the UTP Cable (SKY BLUE(+) & PINK(-))

●

●

Open contact: DAY
Close contact: NIGHT

● 5V/10mA : IR LED ON (NIGHT)

● 0V : IR LED OFF (DAY)

9