Reverie 7T Owner's Manual

Reverie 7T™ Power Base

Owner’s Manual and Reference Guide

REV: 2016-05-11
Manual Part No. D1103-301-7T

Copyright © 2016. All Rights Reserved.

Ascion LLC.

Reverie 7T Power Base

Table of Contents

Safety Precautions.............................................................................................3

Parts List............................................................................................................9

Power Base Assembly Instructions ..................................................................10

App User Guide ...............................................................................................14

Wireless Remote Control...................................................................................17

Remote Control Operation Guide......................................................................18

Bluetooth® Pairing (Replacement Remote Control)...............................................20

Remote Control Emergency Power Down Feature............................................22

Troubleshooting.................................................................................................23

Warranty.............................................................................................................25

Warranty Information: Please see the warranty that came with your

CUSTOMER SERVICE: 800-973-8374

product. Reverie 7T Power Base

[e-mail]

2

Safety Precautions

SAFETY PRECAUTIONS

WARNING! IMPORTANT SAFETY INSTRUCTIONS.

PLEASE READ THESE INSTRUCTIONS THOROUGHLY

BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS!

When using an electrical furnishing basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING (THIS FURNISHING)

DANGER: To reduce the risk of electric shock:

Always unplug this furnishing from the electrical outlet before cleaning.

WARNING:

To reduce the risk of burns, re, electric shock, or injury to persons:

• Unplug from outlet before putting on or taking off parts.

• Close supervision is necessary when this furnishing is used by or near children, invalids or
disabled persons.

• Use this furnishing only for its intended use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

• Never operate this furnishing if it has a damaged cord or plug, or if it is not working properly,

dropped or damaged, or dropped into the water. Return the furnishing to a service center for
examination and repair.

• Keep the cord away from heated surfaces.

• Never operate the furnishing with the air openings blocked. Keep the air openings free of lint,
hair and the like.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.

• To disconnect, turn all controls to the off position, then remove plug from outlet.

• Do not place remote in water or area of intense heat.

• Do not lift bed by wooden side rails.

• Excessive dropping of the remote may cause performance issues.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

3

Safety Precautions

WARNING: Risk of Injury:

Keep children away from extended foot support (or other similar parts).

WARNING: Risk of electric shock:

Connect this furnishing to a properly grounded outlet only.
See Grounding instructions.

GROUNDING INSTRUCTIONS:

This product must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.

DANGER:

Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman if you are in doubt as to whether the product is
properly grounded.

Do not modify the plug provided with the product. If it will not t the outlet, have a proper outlet
installed by a qualied electrician.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

4

Safety Precautions

This product is for use on a standard 120-volt circuit, and has a grounding plug that looks
like the plug illustrated in photo A (see Figure). A temporary adapter that looks like the
adapter illustrated in photo B and C can be used to connect this plug to a 2-pole receptacle
as shown in photo B if a properly grounded outlet is not available. The temporary adapter
should be used only until a properly grounded outlet (photo A) can be installed by a

qualied electrician. The green colored rigid ear, lug or the like extending from the adapter
must be connected to a permanent ground such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in place by a metal screw.

This product is for use on a circuit having a standard rating of 120 volts and is factory equipped
with a specic electric cord and plug to permit connection to a proper electric circuit. Make sure
that the product is connected to an outlet having the same conguration as the plug. No adapter
should be used with this product. If the product must be reconnected for use on a different type of
electric circuit, the reconnection should be made by qualied service personnel.

Unauthorized modications could void the electrical portion of your warranty. Failure to use a
properly grounded outlet for this product or modication of the plug will compromise this important
grounding safety feature and may result in electrical shock, electrical re, or faulty operation of the
product.

FOR BEST RESULTS, YOUR POWER BASE SHOULD BE PLUGGED INTO A SURGE
PROTECTOR (not included).

WARRANTY PRECAUTION:

Do not open control box, motors or wireless remote controls (with the exception of the battery
compartment if equipped). The warranty is void if these units are tampered with. Any repair or
replacement of power base parts must be performed by an authorized technician.

IN-HOME USE AND HOSPITAL DISCLAIMER:

Your power base is strictly designed for in-home use only. It is NOT designed for hospital use
and is NOT designed to meet hospital standards. Do not use this base with TENT TYPE oxygen
therapy equipment or near explosive gases.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

5

Safety Precautions

WARNING!

DO NOT USE NEAR PEOPLE USING OR WEARING MEDICAL DEVICES. FOR HOUSEHOLD /
RESIDENTIAL USE ONLY. DO NOT USE OUTDOORS.
This product conforms to UL STD 962

IMPORTANT SAFETY FEATURES:

Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.

If there is an overload weight condition on the head or foot mechanism, the control unit will
automatically stop all functions. Once the excess weight is removed the control unit will
automatically allow all functions to resume operation after 30 seconds.

As with any product that produces a vibrating motion, it is possible that some pacemakers may
interpret this motion as a false sense of movement and/or exercise. This may or may not affect
your pacemaker. If you have any concerns, please consult your physician. For more information
please contact customer service by calling 800-973-8374.

USER-SERVICEABLE PARTS:

This product is specically designed to have no maintenance by you, the user. Therefore, you are
encouraged not to open any motors, alter the wiring, adjust, modify or change the structure of the
product, as it will void the warranty.

POWER RATINGS:

INPUT: AC 120V - 60Hz, 1Amp
OUTPUT: DC 24V-3A
FUSE: 1.5A 250V

The input transformer voltage is AC120V (1.5 Amp) 60HZ, and the output voltage is DC24V
(3Amp). When there is a short-circuit, a fuse on the transformer will be blown in order to protect
the electrical equipment (Fuse: 1.5A). Should the above situation occur, the customer should
seek professional assistance by calling a licensed electrician or by contacting customer service at
800-973-8374.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

6

Safety Precautions

SMALL CHILDREN AND PETS WARNING:

After your Reverie 7T Power Base has been unboxed, immediately dispose of packaging as it can
smother small children and pets. To avoid injury, children and pets should not be allowed to play
on or under the power base.

Children should not operate this product without adult supervision. Close supervision is necessary
when this furnishing is used by, or near children, invalids, or disabled persons.

SAVE THESE INSTRUCTIONS:

Your Reverie 7T Power Base has been designed to provide you with the reliable
operation and durability you expect. This product has been inspected and tested prior to shipment.

RADIO FREQUENCY IS 433.92 MHZ
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

To comply with the FCC RF exposure compliance requirements, no change to the

antenna or the device is permitted. Any change to the antenna or the device could result

in the device exceeding the RF exposure requirements and void the user’s authority to

operate the device.

PRODUCT RATINGS

The lift motor in your Reverie 7T Power Base is NOT designed for continuous use. Reliable
operation and full life expectancy will be attained as long as the lift motor does not operate more
than two (2) minutes over an eighteen (18) minute period, or approximately 10% duty cycle. Any
attempt to circumvent or exceed this rating will shorten the life expectancy of this product and may
void the warranty. The recommended weight restrictions for your Reverie 7T Power Base is up to
850 lbs. total weight, including people and the mattress for all sizes of power bases. Lift speed will
vary due to weight and mattress conguration, as well as the mattress type. The weight must be
evenly distributed across the power base. This Product is not designed to support or lift 850 lbs of
total weight in the head or foot sections of your Reverie 7T power base alone, or in any unevenly
distributed fashion. Some mattresses are not designed for Power Bases because they do not
bend or ex well when adjusted. When using such a mattress with your Reverie 7T Power Base
the weight limits set forth herein do not apply, as the bending of the mattress requires signicant
force and puts signicant strain on the motors and the Power Base itself.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

7

Safety Precautions

Note: Exceeding the recommended weight restrictions could damage your power base

and void your warranty and using a mattress on top of your power base that is
not designed for adjustability may also void your warranty.

For best performance, you should enter and exit the Power Base while it is in the at or fully
lowered position.

DO NOT SIT ON THE HEAD OR FOOT SECTIONS WHILE IN THE RAISED POSITION.

INTENDED USAGE

The electric power base should be installed with the head board brackets and/or the head
of the frame positioned close to a wall.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

8

Parts List for Reverie

7T Power Base

Note: Before discarding any packing materials, check the power base carton and verify the
following items in the parts list are included:

PARTS LIST

A. C.B.

A. Wireless Remote Control (1)

B. Mattress Retainer Bracket (2)

C. Base Legs (4)

D. F.

E.

D. Inner Headboard Bracket (2)

E. Outer Headboard Bracket (2)

F. Retainer Bar Bolt (4)

H.G. I.

G. Inner Headboard Bracket Bolt (4)

H. Outer Headboard Bracket Bolt (4)

I. Retainer Bar Plate (4)

J. 5/16 Inch Washer (16)

J.

K.

L.

K. 5/16 Inch Locking Nut (8)

L. Allen Key ( 1)

M. Wrench (1)

N. 9-Volt Batteries (2)

O. 5V 1A Wall Charger Adaptor (1)

CUSTOMER SERVICE: 800-973-8374

M.

[e-mail]

9

N.

O.

IMPORTANT UNPACKING INSTRUCTIONS

To avoid damage to the power base, always
open the carton while the power base is
laying in the FLAT position on the oor.

Power Base Assembly Instructions

OPEN FLAT

STEP 1

Carefully lift the power base unit out of the
shipping carton, keeping the unit top side
down. For safety reasons, this should be
performed by 2 people.

STEP 1A

NOTE: THIS IS AN OPTIONAL STEP.

If the customer wants to t this bed base
inside their own bed frame, then remove all 4
side rails. If the customer does not want this,
then proceed to STEP 2.

Remove Head/Foot end rails

· Loosen cam lock at both corners.

· Loosen and remove hardware [bolts/nuts]
from the two inside slide brackets of each rail.
[see gure 1A,1B, and 1C]

· Gently detach the head and foot rails.

Figure 1B

Figure 1C

Remove Side rails

· Loosen and remove hardware [bolts/nuts]
from the two inside U brackets of each rail
[see gure 1D and 1E]

· Gently detach the side rails

Figure 1A

CUSTOMER SERVICE: 800-973-8374

Figure 1D

Figure 1E

[e-mail]

10

STEP 2

Assembling power base legs: Open the
accessories box, take out the 4 legs,
and thread them in a clockwise direction into
the threaded holes in the frame.

NOTE: Tighten the legs securely to the frame.
Leave no space between the leg and frame.

STEP 3

Power Base Assembly Instructions

ATTENTION! Improper handling

DO NOT

lean the power base
against the installed
legs to ip it over.

STEP 6

Plug the power cord into a grounded electrical
outlet.

NOTE: An electrical surge protection unit is
recommended (not included)

Remove and extend the power cord from the
frame.

WARNING:

POWER CORDS MUST NOT INTERFERE

WITH ANY POWER BASE MECHANISMS.

STEP 4

Remove the plastic packaging from the power
base.

STEP 5

Carefully rotate the power base over to the
topside up position, resting on all 4 legs.

STEP 7

Briey activate all functions on the wireless
remote control to verify that all of the features
are operational. If your Reverie 7T Power
Base does NOT operate, please refer to the

Troubleshooting section beginning on page
23 of this manual.

NOTE:

ProGrip™ is a material
feature on the foot end
of the power base that
prevents the mattress
from sliding off the base
when operating the head
and foot lifts.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

11

Power Base Assembly Instructions

STEP 8

DO NOT NEED RETAINER BARS.
Only install at the customers request.
Customers should try the ProGrip feature rst
without corner retainer bars. If they nd there
are issues with the mattress not staying on the
base when elevated then we recommend the
customer installing 2 retainer bars at the foot
end of bed. See STEP 9 to install the corner
retainer bars.

STEP 9

NOTE: Use only a manual screwdriver to

install the retainer bolts. DO NOT use a
power screwdriver to tighten the bolts. DO
NOT over tighten the mattress retainer
hardware.

NOTE: If the power base is to be set
up without a headboard, simply install a
mattress on the frame. If a headboard is to
be installed, proceed to step 10.

ATTENTION: For any King/Split King
conguration, do not add center retainer
bars for either base on head or foot.

When two Twin XLs or two Split California
Kings are put together, DO NOT install
retainer bars in the center head or center
foot sections of the bases.

Use the Retainer Bolts (F) and Retainer
Bar Plate (I) to fasten the Mattress Retainer
Bracket (B) to the power base.

NOTE: It is important to position the bottom
of the headboard cross member a maximum
distance of 3 inches (76.2 mm) between the
headboard and the top of the mattress. Do
not exceed 3 inches (76.2 mm).

STEP 10

Install the headboard brackets to the power
base. Place one bracket on the left-hand side
of the power base and one bracket on the
right-hand side of the power base.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

12

Headboard Bracket Installation

1. Use the remote control to raise the head of
the base in order to gain access to the power
base frame.

2. Remove plastic cap and place the Inner
Headboard Bracket (D) into the round tube
frame making sure the bracket inserted into
the round tube. This will create a box shape.
Place the Headboard Bracket Bolt (G) with a
5/16 Inch Washer (J) through the pre-drilled
hole in the round tube frame and pass it
through the Inner Headboard Bracket. Use
the 5/16 Inch Washer (J) and the 5/16 Inch
Bracket. Use the 5/16 Inch Washer (J) and
5/16 Inch (K) and tighten the bolt in place.
Repeat for the opposing side of the power
base frame.

3. Place the open side of the outer headboard
bracket (E) onto the exposed square tube
of the inner headboard bracket (D). This will
create a tight t between (D) and (E). Place
a Headboard Bracket Bold (G) with a 5/16
Inch Washer (J) through the Outer Headboard
Bracket (E) and into Inner Headboard Bracket
(D). Use a 5/16 Inch Washer (J) and 5/16 Inch
Locking Nut (K) and hand tighten to allow
for adjustment. Repeat same procedure for
opposing side of the power base frame.

Power Base Assembly Instructions

4. Firmly tighten the headboard bolts (not
included) to the end of the headboard bracket
assembly.

5. Measure the distance of the center to center
mounting holes in the headboard.

6. Measure the distance of the center to center
mounting holes in the headboard bracket
assemblies.

7. If the headboard brackets require adjustments,
loosen the bolts that are holding the outer
headboard brackets and move them to the
necessary distance. Reinstall the bolts and
rmly tighten.

STEP 11

Place your mattress on top of your power base.

Typical Reverie 7T Power Base is now
complete. If the power base is equipped with
a programmable setting or options, refer to the
Remote Control Guide for more information.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

13

App User Guide

Your Reverie 7T Power Base has a Bluetooth
Accessory Module as standard equipment.

The Bluetooth Accessory Module allows you
to control your power base with your mobile
device using a free, downloadable app. The
module is compatible with the following devices:
iPhone 5 and 6 series
iPad 3, iPad mini, iPad Air
iPod Touch 5th generation
Wi is not required to operate this device

How to Download
the App Software

STEP 1

Please use any of the previously listed devices
to log into the APP Store.

STEP 2

Type “Reverie Remote” in the search column.

STEP 3

Select the reverie app.

Reverie 2.0

STEP 4

Click install to download the app.

Nightlight Feature

The LED light on the Bluetooth Accessory
Module serves as a nightlight that can be
controlled with the remote control or with the
mobile APP.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

NOTE: Once the App is installed, when
you open the app the Bluetooth Module will
connect to your device automatically.

14

Home Screen

• Key features, functions and settings are accessible
from the home screen.

- Settings, Preset List, Comfort Settings, Routines,
Bluetooth, Nightlight, Home Tab, Position Tab,
Massage Tab, and Alarm Tab.

• Reverie Presets – Zero Gravity, Anti-Snore, and Flat
are right at your ngertips.

• Comfort Setting – Press “New +” to program a unique
head, foot and/or massage combination.

• Routines – Press “New +” to program a set of saved or
new comfort settings into a series of timed positions.

Position Control

• Control your head and foot elevation.

• Select the part of the bed you would like to elevate or
lower (head or foot).

- Use your nger to slide the blue dot
along the curve to your desired elevation.

- Or press and hold the plus or minus
symbol to adjust elevation.

• Your position readout on a scale of 1-100 will appear
at the top of the screen and next to the head or foot
position.

• NOTE: Lumbar control is not available on the 7T
adjustable power base.

App User Guide

Massage

• Control your massage intensity and duration.

• Full body – Turns on the full body function.

• Wave – Select number of alternating pulses at the
head and foot of the bed.

• Head and Foot control – Select massage intensity in
the head and foot sections of the bed.

- Use your nger to slide the blue button to your
desired intensity.

- Or press and hold the plus or minus symbol to
adjust intensity.

• Timer – Select your desired massage duration.

• Stop – Turns the massage off.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

15

Alarm

• Create an alarm setting to raise and/or massage you
awake.

• Press “New +” to create a new alarm setting.

- Set time: Scroll to select the hour, minute and day.

- Repeat: Select the days of the week you would
like the alarm to activate.

- Bed control: Select nothing or select a new or
existing comfort setting or routine.

- Snooze: Enable snooze.

Settings

• Customize your app in settings.

• User Prole – Dene your user prole to get
recommendations on custom settings for you.

• Bluetooth – Shows the bed your app is connected to.
Shows nearby beds that you can connect to in order of
proximity.

• Help – Contact info for technical support.

• Mattress Congurator – Recongure your Reverie
Dream or Dream Supreme mattress with these
rmness guides.

• Factory Reset – Reset your app to original settings.

• Logout – Logout or create a new user.

App User Guide

CUSTOMER SERVICE: 800-973-8374

[e-mail]

16

DISPLAY SCREEN

A. RAISE & LOWER
HEAD SECTION OF THE BASE

B. RAISE & LOWER
FOOT SECTION OF THE BASE

C. RETURN ALL SECTIONS TO FLAT

Wireless Remote Control

D. ANTI SNORE

E. ZERO GRAVITY

F. CUSTOM PRESETS

G. NIGHTLIGHT ON/OFF

H. MASSAGE WAVE PATTERN PRESET

I. INCREASE(+) & REDUCE(-) MASSAGE
INTENSITY ON HEAD SECTION OF THE BASE

J. INCREASE(+) & REDUCE(-) MASSAGE
INTENSITY ON FOOT SECTION OF THE BASE

K. STOP ALL MASSAGE FEATURES

L. MICRO USB CHARGING PORT

CUSTOMER SERVICE: 800-973-8374

[e-mail]

17

Remote Control Operation Guide

OPERATING INSTRUCTIONS:

NOTE:

All screens will timeout after 5 seconds,
15 seconds if screen is auto-refreshing

HEAD AND FOOT ADJUSTMENTS (A,B)

• Adjusts the head and foot sections to the
desired positions.

• Zero Clearance feature allows for the
foundation to be placed on the oor without
legs and able to adjust all sections [head/
foot/lumbar] in a complete motion range
without any of the mechanical parts under
the bed touching the oor. Basically allows
you to use your adjustable bed without legs
if desired.

POWER BASE “FLAT” BUTTON (C)

• Levels the power base to the at position
when the button is pressed and held for at
least 3 seconds.

ANTI SNORE (D)

• Raises the HEAD slightly for easier
breathing.

ZERO GRAVITY (E)

• Allows your legs to be lifted to a position
slightly above the chest, which enables
blood ow to easily circulate back to the
heart, thus reducing stress and fatigue.

NIGHTLIGHT ON/OFF (G)

• Toggle the lightbulb button for on/off
functions.

HEAD AND FOOT MASSAGE CONTROLS
(I,J)

• Turns on the corresponding massage unit
(starting at intensity 5 of 10)

• Slowly increases or decreases massage
intensity. To increase massage intensity,
press (+) button. To decrease massage
intensity, press (-) button.

NOTE: The “FLAT” cycle can be
interrupted and canceled by pressing the
head or foot adjustment buttons (A, B).

PROGRAMMABLE MEMORY
BUTTONS (F):

You can store 4 personalized memory
positions.

• To Set a Memory Position: When in desired
position, press and hold Memory button
for more than 5 seconds until the LED light
ashes 3 times to signal Memory position is
stored.

• To recall a Memory Position: Press 1 of the
4 presets.

NOTE: The lowest setting will turn off the
corresponding massage unit.

WAVE MASSAGE PATTERN (H)

• Turns on both head and foot massage
motors to the wave 1 preset.

MASSAGE STOP BUTTON (K)

• Press to stop all massage features.

NOTE: The massage feature is designed
to automatically shut off after 30 minutes of
continuous use.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

18

Remote Control Operation Guide

ADDITIONAL REMOTE
FEATURES:

• The Reverie 7T power base uses a
Bluetooth® remote control system.

• The included remote is already paired with
your power base, so should be operational
right out of the box. Please test some of the
feature to ensure functionality.

• Only replacement remote controls require
pairing instruction on following pages.
If you nd that your remote is not paired
with the bed, please follow those Bluetooth
pairing instructions.

NOTE: This power base may have minor
intermittent performance due to RF
Interference. This is a normal operation of
the power base and is not a defect.

• The buttons are back-lit, when a button is
pressed, to aid the visibility of the remote in
low light environments.

• Customers can control the remote without
facing the receiver (best transmission range
is within 30 feet or 10 meters)

• The 7T remote is equipped with a
lithium-ion battery that can be recharged
anytime with the included Micro USB wall
charger adapter.

• Please fully charge your remote before
operating.

SAFETY:

• If there is an overload weight condition on
the head or foot mechanism, the control unit
will automatically stop all functions.

• The input transformer voltage is AC 120V
60 HZ, the output voltage is DC 24V 3A.
When there is a short circuit, a fuse on the
transformer will be blown in order to protect
the electrical equipment (Fuse: 1.5A).

ATTENTION: When the above situation
occurs, the customer MUST seek
professional assistance.

NOTICE:

The changes or modications not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate the equipment.

IMPORTANT NOTE:

• To comply with the FCC RF exposure
compliance requirements, no change to
the antenna or the device is permitted.
Any change to the antenna or the device
could result in the device exceeding the
RF exposure requirements and void user’s
authority to operate the device.

THIS DEVICE COMPLIES WITH
PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY
NOT CAUSE HARMFUL
INTERFERENCE (2) THIS
DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED
OPERATION.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

19

Bluetooth® Pairing

Replacement Remote Control

STEP 1

Ensure the power base is plugged into a
functioning outlet.

STEP 2

Hold lightbulb button for 3 seconds.

STEP 3

If only one bed is discovered the remote will
automatically connect to that bed.

STEP 4

If two beds are detected then you will be asked
to choose the bed type. [KING or SPLIT KING]
* See decision chart on next page.

STEP 5

NOTE: If it cannot detect any beds then

will say BED NOT DETECTED.

NOTE:
Please remember to recycle all electronics.

If you choose SPLIT KING then you will be
asked if you want to control both sides.

STEP 6

If you choose OTHER then you will be shown a
list of all beds available and asked if you would
like to PAIR MULTIPLE BEDS.
If yes, scroll and select beds to pair.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

20

massage will turn on for 2 seconds and cut off

NOTE:

1.Scroll using head/foot.

2. Press light icon to select.

Hold down the light icon

to access the B.T setup

SEARCHING...

Bluetooth® Pairing

Replacement Remote Control

NO BED

No device

DETECTED

No beds to connect with

Automatically

connects

Yes

Automatically

connects

2 devices ?

No

(> 2 Devices)

Yes

King

Select Only 2 devices

Instructs # of beds to choose based on type of foundation setup
Select Only 1 device ­Select Only 2 devices ­Selection Unlimited -

PAIR 1 BED
PAIR 2 OF 2
PAIRED: X

1 device?

No

TYPE OF FOUNDATION

KING
KING SPLIT
OTHER

Other

Selection Unlimited

PAIR MULTIPLE BEDS?

YES
NO

PAIR 1 OF 2

BTSA:234XBED1
BTSA:234XBED1
BTSA:234XBED1
BTSA:234XBED1
BTSA:234XBED1

PAIRED

PAIRING PROCESS

COMPLETE

CONTROL BOTH SIDES?

Split
King

YES
NO

No

Select Only 1 device

Automatically

connects

Yes

Yes

2 devices ?

(> 2 Devices)

No

Select Only 2 devices

Press the “Zero G” button within the B.T menu to identify the bed.

The foundation’s night light and PLC light will activate and the

CUSTOMER SERVICE: 800-973-8374

Note: Dot indicates selected bed.

[e-mail]

21

Remote Control Emergency

Power Down Feature

Your Reverie 7T power base has an
emergency lowering feature in the event that
your power base is in the raised position and
has lost power due to a power outage.

STEP 1

Locate and remove the cover for the 9 volt
batteries.

Figure 1: 9 volt batteries cover.

STEP 3

Press the “FLAT” button (C) or the individual
lower buttons (A,B) to lower the power base to
a at position.

STEP 4

Remove the two 9 volt batteries and replace the
battery cover.

Figure 3

STEP 2

Install two (2) alkaline 9 volt batteries.

Figure 2: Install 9 volt batteries.

NOTE: The two (2) 9 volt batteries are
only intended to be used once. After you
complete the emergency lowering, the
batteries need to be replaced with new
alkaline batteries.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

22

Troubleshooting

In the Event the Reverie 7T Power Base fails to operate, investigate the symptoms and possible
solutions provided in the chart below:

Symptom Solution

• Verify the power cord is plugged into a

Remote Control appears to be operable but will
not activate the bed.

No features of the Reverie 7T Power Base
will activate.

working, grounded electrical outlet. A

grounded, electrical surge protection
device is recommended. Test the outlet by

plugging in another working appliance.

• Make sure remote is paired to the bed.

• Your electrical circuit breaker may be

tripped.

• The surge protection device of electrical

outlet is defective, test the outlet by
plugging in another device.

Remote control LED will not illuminate.

Head or foot section will elevate but will not
return to the horizontal (at) position.

• Charge the remote with the provided micro

usb wall adapter charger.

• The power base mechanism may be

obstructed. Elevate the power base and
check for an obstruction. Remove the
obstruction.

• The head section may be too close to the

wall. The headboard may be too close
to the edge of the mattress. Verify a 1.5”
(38.1mm) to 2” (50.8mm) distance is
between the headboard brackets and the
mattress. Adjust if required.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

23

Symptom Solution

Head of Foot Lift function has minor
interference during operation.

Excessive massage motor noise.

Troubleshooting

• Make sure that you are following the duty

cycle of the motors (do not operate more
than three (3) minutes over a thirty (30)
minute period,approximately 10% duty
cycle).

• Press the lift buttons squarely & accurately.

• If the bed is located on hard surface

ooring, place carpet pieces.

• Elevate the head or foot section a short

distance (with the hand control) to realign
the lift/lower mechanisms with the bed
support platform.

• Verify that the bed is not positioned against

a wall, nightstand, or other object that may
cause the vibration or noise.

• If the Reverie 7T is installed over a bed

frame, verify the massage motors are
not causing the bed frame (or bed frame
components) to vibrate.

• Verify that the headboard attachment

hardware is rmly tightened.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

24

Warranty

20 Year Limited Warranty for Reverie Power Bases

Ascion, L.L.C. d/b/a Reverie (hereinafter referred to as “Reverie”) warrants to the end user
(hereinafter referred to as “Purchaser”) that during the twenty (20) year term of this Limited
Warranty, Reverie will, at its sole discretion and option, repair or replace Purchaser’s motorized
bed frame or motorized bed foundation parts (hereinafter referred to as “adjustable bed” or
“adjustable beds”) that are found to be defective due to faulty workmanship or materials, subject
to the limitations set forth herein.

This Limited Warranty begins on the “warranty commencement date” which is the date of
purchase for new unused adjustable beds and the date of manufacture for adjustable beds that
have been used as oor or display models. Thus, on a oor model adjustable bed, the warranty
is a portion of the 20-year Limited Warranty. If original proof of purchase is not provided by
Purchaser, Reverie reserves the right to determine that the adjustable bed is not covered by this
Limited Warranty or to use the manufacturing date as the warranty commencement date. This
Limited Warranty extends only to the original Purchaser and may not be transferred.

YEAR 1: FULL COVERAGE OF PARTS AND LABOR

Upon receiving reasonable notice during the rst year from the warranty commencement date,
Reverie will send replacement parts (at no cost to the Purchaser) for any defective adjustable
bed part to the Purchaser, and Reverie will pay all pre-authorized labor and transportation costs
associated with the repair or replacement of any parts Reverie determines to be defective. This
one (1) year Limited Warranty shall not apply if Purchaser does not return any and all defective

parts to Reverie within 15 days of Purchaser’s receipt of replacement part(s).

YEARS 2-5: FULL COVERAGE OF PARTS ONLY

Upon receiving reasonable written notice at any point in time that is more than one (1) year and
up to ve (5) years from the warranty commencement date, Reverie will offer replacement parts
for any defective adjustable bed part to the Purchaser. This four (4) year Limited Warranty shall
not apply if Purchaser does not return any and all defective parts to Reverie within 15 days of
Purchaser’s receipt of replacement part. Purchaser shall bear all service, transportation, labor and
shipping costs related to the delivery and/or replacement of the defective part.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

25

Warranty

YEARS 6-20: FULL COVERAGE OF FRAME ONLY

Upon receiving reasonable written notice at any point in time that is more than ve (5) years and
up to twenty (20) years from the warranty commencement date, Reverie will offer replacement
parts for any mechanical part of the frame found to be defective. Electronics, electrical
components, drive motors and massage motors are excluded from this Limited Warranty.
Purchaser shall bear all service, transportation, labor and shipping costs related to the delivery
and/or replacement of the defective part.

ADDITIONAL TERMS AND CONDITIONS

This Limited Warranty does not apply: (a) to any damage caused by the Purchaser; (b) if there
has been any unauthorized repair or replacement of adjustable bed parts; (c) if the adjustable
bed has been mishandled (whether in transit or by other means), subjected to physical or
electrical abuse or misuse, or otherwise operated in any way inconsistent with the operation and
maintenance procedures outlined in the Owner’s Manual, this Limited Warranty, and any other
applicable document published or approved by Reverie; (d) to damage to mattresses, fabric,
cables, electrical cords or items supplied by any Reseller of the adjustable bed, (contact the
Reseller or other relevant party for warranty information on these items.); (e) if there have been
any unnecessary service calls, including costs for in-home service calls solely for the purpose
of educating the consumer about the adjustable bed or for nding an unsatisfactory power
connection.

Repairs to or replacement of the adjustable bed or its components under the terms of this Limited
Warranty will apply to the original warranty period and will not serve to extend such period.

The decision to repair or to replace defective parts under this Limited Warranty shall be made
exclusively by Reverie in its sole and exclusive discretion.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE PURCHASER. THERE
SHALL BE NO LIABILITY ON THE PART OF REVERIE AND THEIR RESPECTIVE PARENTS,
SUBSIDIARIES, DIVISIONS OR AFFILIATES FOR ANY SPECIAL, INDIRECT, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE, CLAIM, OR LOSS NOT
EXPRESSLY COVERED BY THE TERMS OF THIS LIMITED WARRANTY.

This Limited Warranty does not include reimbursement for inconvenience, removal, installation,
setup time, loss of use, shipping, or any other costs or expenses.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

26

Warranty

UNLESS OTHERWISE EXPRESSLY STATED IN THIS DOCUMENT, REVERIE AND THEIR
RESPECTIVE PARENTS, SUBSIDIARIES, DIVISIONS AND AFFILIATES EXPRESSLY
DISCLAIM ANY OTHER WARRANTY WHATSOEVER, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, AND FREEDOM FROM DEFECTS AND WORKMANSHIP.

Some states may not allow the exclusion or limitation of incidental or consequential damages in
some circumstances, so the above limitation or exclusion may not apply to every Purchaser. This
Limited Warranty gives the Purchaser specic legal rights, and the Purchaser may also have other
rights, which may vary from state to state. This Limited Warranty is valid in all states of the United
States except Alaska, Hawaii and Puerto Rico

If you experience any trouble with your adjustable bed during the warranty period, please consult
the troubleshooting guide provided with your adjustable bed and online (if applicable), or the
troubleshooting video provided online (if applicable). If problems persist after following these
instructions, please call:

1-800-973-8374

[e-mail]

Please have your receipt ready and available.

Thank you and enjoy your power base.

CUSTOMER SERVICE: 800-973-8374

[e-mail]

27

Limited Warranty

Register Online. For easy registration of your warranty visit www.reverie.com

Please prepare a digital copy of your proof of purchase

(invoice or sales receipt) when registering online.

You may be required to provide the Serial Number for registration,

you can nd it on the Law Tags attached to the base.

Manufactured by Reverie

®

For Warranty and Service:

800-973-8374

[e-mail]

341 Central Ave. Silver Creek, NY 14136

www.reverie.com

Name____________________________________________________________________

Phone____________________________________________________________________

Address__________________________________________________________________

City_________________________ State/Province_________ Zip/Postal Code__________

Purchase Date ____________________________________________________________

Bed Serial Number__________________________________________________________

Email Address_____________________________________________________________

To register your warranty via mail, send this portion and a copy of your proof of purchase (invoice or sales

Reverie Warranty Dept. 314 Central Ave. Silver Creek, NY 14136 (800-973-8374)

CUSTOMER SERVICE: 800-973-8374

receipt) to:

[e-mail]

28

Notes

CUSTOMER SERVICE: 800-973-8374

[e-mail]

29

Notes

CUSTOMER SERVICE: 800-973-8374

[e-mail]

30

Notes

CUSTOMER SERVICE: 800-973-8374

[e-mail]

31

CUSTOMER SERVICE: 800-973-8374

[e-mail]

32