REVELL M4 Sherman Tank User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]

KIT 7851 85785100200

The Sherman family of armored

vehicles was the mainstay of the
allied armored forces in WWII. The
Sherman tank saw extensive ser­vice in every theater of the war.
Sherman M4's equipped with a
prong-like device welded to the
front of the hull could cut through
the thick hedge rows during the
invation of Normandy. This version
of the M4 was called a "Hedgehog".
Your Revell model has an opera­tional hedge cutter and supplemen­tal sand bag and wood armor, three
crew members, a movable gun turret,
cannon and tank treads and authen­tic decal markings for two versions.

* REPEAT SEVERAL TIMES

* A REPETER PLUSIEURS FOIS

* REPEAT PROCEDURE

* REPETEZ LE PROCEDE

M4 SHERMAN TANK

* OPTIONAL PARTS

``` ` ``

* PIECES EN OPTION

* DECAL

* DECAL COMANIE

* ASSEMBLY CAUTION

*ATTENTION D ASSEMBLEE

* CEMENT TOGETHER

* A COLLER

(HEDGEHOG)

* REMOVE AND THROW AWAY

* A RETIRER ET JETER

* DO NOT CEMENT

* NE PAS COLLER

READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER

* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be

marked by a star (★) to indicate chrome
plated plastic.

* For better paint and decal adhesion, wash

the plastic parts in a mild detergent solution.
Rinse and let air dry.

* Check the fit of each piece before

cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas

to be cemented.
* Allow paint to dry thoroughly before

handling parts.
* Any unused parts may be discarded.

DECAL APPLIC ATION INSTRUCTIONS

1. Cut desired decal from sheet.

2. Dip decal in water for a few seconds.

3. Place wet decal on paper towel.

4. Wait until decal is movable on paper backing.

5. Place decal in position on model, face up and

slide backing away.

6. Press out air bubbles with a soft damp cloth.

7. Milkiness that may appear is for better decal

adhesion and will dry clear. Wipe away any

excess adhesive.

8. Do not touch decal until fully dry.

9. Allow the decals 48 hours to dry before

applying clear coat.

NOTE: Decals are compatible with

setting solutions or solvents.

* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont

marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.

* Pour une meilleure prise de la peinture et des autocollants,

laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.

* Vérifier que chaque pièce s'ajuste bien avant

de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.

DIRECTIVES D'APPLICAT ION DES AUTOCOLLANTS

1. Découper l'autocollant désiré de la feuille.

2. Tremper l'autocollant dans de l'eau pendant quelques secondes.

3. Placer l'autocollant mouillé sur une serviette en papier.

4. Attendez que l'autocollant puisse être déplacé sur son

support en papier.

5. Mettre l'autocollant en position sur le modèle face sur

le dessus et faire glisser le support pour l'enlever.

6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.

7. La substance laiteuse qui peut apparaître est destinée à

améliorer l'adhésion de l'autocollant et devient incolore au

séchage. Essuyer pour enlever tout excédent d'adhésif.

8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.

9. Laisser l'autocollant sécher pendant 48 heures avant

d'appliquer une couche transparente.

REMARQUE: Les autocollants sont compatibles avec

les solutions de fixage ou les solvants.

This paint guide is provided to complete this kit

Ce guide de peintures est fourni pour reproduire le modèle

Olive Drab

Semi Gloss Black

Gunmetal

Red

Rust

Wood

Silver

Tan

Brown

as shown on the box.

réduit qui apparaît sur la boîte.

Gris vert

Noir satiné

Bronze

Rouge

Rouille

Bois

Argent

Havane

Brun

If you have any questions or comments, call our hotline at: [phone]

or, please write to:

Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007

Be sure to include the plan number (85785100200), part number, description, your return address and phone number.

Visit our website: www.revell.com

Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.

1

FRONT / REAR HULL ASSEMBLY

22

DRIVE SPROCKET

OUTER HALF

OLIVE DRAB

1

HULL

OLIVE DRAB

23

BUSHING

OLIVE DRAB

21

DRIVE SPROCKET

INNER HALF

OLIVE DRAB

REAR

1

HULL

OLIVE DRAB

FRONT

CAREFULLY TRIM OFF EXCESS PLASTIC

WHERE ATTACHED TO TREES

23

BUSHING

21

DRIVE SPROCKET

INNER HALF

OLIVE DRAB

DRIVE SPROCKET

OUTER HALF

OLIVE DRAB

6

COVER

OLIVE DRAB

20

IDLER WHEEL

OLIVE DRAB

22

6

COVER

OLIVE DRAB

2

25

IDLER WHEEL

OLIVE DRAB

29

ROLLER

OLIVE DRAB

IDLER WHEEL

OLIVE DRAB

SHORT PIN

17

IDLER SUPPORT

20

16

IDLER SUPPORT

OLIVE DRAB

OLIVE DRAB

BOGIE ASSEMBLY

31

BOGIE HALF

OLIVE DRAB

32

BOGIE HALF

OLIVE DRAB

GLUE ONLY AT

THE SHADED

AREAS

LONG PIN

Kit 7851 - Page 2

11

SPRING UNIT

OLIVE DRAB

25

IDLER WHEEL

OLIVE DRAB

2

BOGIE ASSEMBLY CONTINUED

COMPLETED

BOGIE

3

DRIVE SPROCKET

TREAD ASSEMBLY

NOTE:

USE A SMALL

DAB OF

SUPERGLUE

TO CEMENT

TRACK LINKS

TOGETHER

TREAD

RUST

RETURN ROLLERS

BOGIE

ASSEMBLIES

IDLER WHEEL

FIRST, SLIP TREADS OVER DRIVE SPROCKET WITH TEETH BETWEEN
TRACKS. NEXT, PLACE TREADS OVER THE RETURN ROLLERS, THEN
IDLER WHEEL. FINALLY, TWIST TREADS OVER THE BOGIE ASSEMBLYS.

TREAD

RUST

Kit 7851 - Page 3

4

DRIVER / REAR ASSEMBLY

REFER TO PAGE 10

95

DRIVER

FOR DRIVER PAINT

COLORS

93

SUPERSTRUCTURE

OLIVE DRAB

INSIDE

SUPERSTRUCTURE

5

MUFFLER TOP

STEEL

5

APPLY CEMENT AS SHOWN BY

DASHED LINES

70

PAD

OLIVE DRAB

26

HOOK

STEEL

30

MUFFLER

BOTTOM

STEEL

TANK BODY ASSEMBLY

30

MUFFLER

BOTTOM

STEEL

5

MUFFLER

TOP

STEEL

FRONT EDGE ON HULL AND

SUPERSTRUCTURE MUST MATCH

Kit 7851 - Page 4

6

94

TAILLIGHT

OLIVE DRAB

TOP REAR ASSEMBLY

63

LIFT RINGS

OLIVE DRAB

9

WRENCH

(IN PLACE)

RED

53

FENDER

OLIVE DRAB

STEEL

2

CRANK

(IN PLACE)

STEEL

94

TAILLIGHT

OLIVE DRAB

RED

4

SPADE

(IN PLACE)

BROWN HANDLE WITH

STEEL SHOVEL

53

FENDER

OLIVE DRAB

14

PICK

HANDLE

BROWN

13

PICK

STEEL

15

AXE

BROWN HANDLE WITH

STEEL HEAD

7

TRIPOD

BROWN

77

SLEDGE

BROWN HANDLE WITH

STEEL HEAD

8

CROWBAR

STEEL

Kit 7851 - Page 5

7 ? 8 ?

74

LIFT RING

OLIVE DRAB

EIGHT BALL VERSION ASSEMBLY HEDGE HOG VERSION ASSEMBLY

74

LIFT RING

OLIVE DRAB

73

MACHINE GUN

GUNMETAL

NOTE:

DECIDE WHICH VERSION YOU

ARE BUILDING (SMOOTH
HULL OR SANDBAGS ON

HULL)BEFORE CONTINUING.

CLOSED

67

DOOR

OLIVE DRAB

67

DOOR

OLIVE DRAB

DOOR

OLIVE DRAB

28

HULL RIB

OLIVE DRAB

75

HEADLIGHT

OLIVE DRAB

SILVER

66

76

GUARD

OLIVE DRAB

27

HULL RIB

OLIVE DRAB

66

DOOR

OLIVE DRAB

76

GUARD

OLIVE DRAB

75

HEADLIGHT

OLIVE DRAB

SILVER

69

PAD

OLIVE DRAB

26

HOOK

STEEL

Kit 7851 - Page 6 Kit 7851 - Page 7

102

FRONT SANDBAGS

TAN

97

SIDE SANDBAGS

TAN

28

HULL RIB

OLIVE DRAB

SIDE SANDBAGS

27

HULL RIB

OLIVE DRAB

96

TAN

CLOSED

67

DOOR

OLIVE DRAB

67

DOOR

OLIVE DRAB

OLIVE DRAB

66

DOOR

76

GUARD

OLIVE DRAB

73

MACHINE GUN

GUNMETAL

75

HEADLIGHT

OLIVE DRAB

SILVER

66

DOOR

OLIVE DRAB

76

GUARD

OLIVE DRAB

SILVER

75

HEADLIGHT

OLIVE DRAB

92

HEDGE CUTTER

RUST

9

64

LIFT RINGS

OLIVE DRAB

71

DOOR

OLIVE DRAB

CUPOLA / CANNON ASSEMBLY

34

CUPOLA

OLIVE DRAB

91

SHIELD

OLIVE DRAB

65

LIFT RING

OLIVE DRAB

62

CANNON HALF

OLIVE DRAB

61

CANNON HALF

OLIVE DRAB

Kit 7851 - Page 8

60

CUPOLA PLATE

OLIVE DRAB

10

CUPOLA ASSEMBLY CONTINUED

SLIDE MANTLET OVER CANNON. CHECK

WHERE MANTLET TOUCHES CANNON

AND MARK SPOT ( DASHED LINES). APPLY

CEMENT (TO CANNON ONLY) THEN SLIDE

MANTLET INTO POSITION.

(NOTE SIDE VIEW AT RIGHT)

90

MANTLET

OLIVE DRAB

11 ?

OPEN

72

HATCH

OLIVE DRAB

HEDGE HOG CUPOLA VERSION ASSY.

68

HATCH

OLIVE DRAB

MACHINE GUN

72

HATCH

OLIVE DRAB

MANTLET

SPACE IN BETWEEN

MANTLET AND SHIELD

95

GUNMETAL

68

HATCH

OLIVE DRAB

SHIELD

10

ANTENNA

ALUMINUM

83

MACHINE GUN

GUNMETAL

84

AMMUNITION

BOX

OLIVE DRAB

100

PROTECTIVE

PIECES

BROWN

101

PROTECTIVE

PIECES

BROWN

CEMENT PART #98, #99, #100 AND #101

ABOUT 1/16" UP FROM BOTTOM OF CUPOLA

99

PROTECTIVE

PIECES

BROWN

98

PROTECTIVE

PIECES

BROWN

Kit 7851 - Page 9

12 ?

EIGHT BALL CUPOLA VERSION ASSY.

OPEN

CLOSED

HATCH

OLIVE DRAB

72

HATCH

OLIVE DRAB

72

68

HATCH

OLIVE DRAB

HATCH

OLIVE DRAB

83

10

ANTENNA

ALUMINUM

68

MACHINE GUN

GUNMETAL

84

AMMUNITION

BOX

OLIVE DRAB

13

Kit 7851 - Page 10

FIGURES

PAINT NOTE:

HELMETS, OLIVE DRAB. BLACK GOGGLES WITH LIGHT GREEN

STRAPS. GREEN UNIFORMS. BROWN SHOES. FACE AND HANDS,

SKIN TONE. GUN, GUNMETAL. HOLSTER, BROWN

14

DECAL PLACEMENT

Kit 7851 - Page 11

15

DECAL PLACEMENT

Kit 7851 - Page 12