REVELL F-14B Tomcat User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]
Page 1
The Grumman F-14 Tomcat was a
supersonic, twin-engine, two seat, variable geometry wing aircraft. The F-14
was used as a precision strike bomber,
defence interceptor and tactical reconnaissance platform from 1974 to 2006.
Your Revell kit has optional AIM-54
Phoenix missles, AIM-9 Sidewinders,
AIM-7 Sparrow III's, 2000 lb JDAM
bombs, 500 lb. LGB bombs and 500
lb. MK-82 bombs, seated pilot or
standing figures of pilot and radar
officer plus two long range fuel tanks.
Optional decal markings are
included for F-14B Tomcat, BUNO
163227, VF-11 Red Rippers or
F-14B Upgrade Tomcat, BUNO
161860, VF-32 Swordsman.
KIT 5525 85552500200
F-14B TOMCAT
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
les solutions de fixage ou les solvants.
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
This paint guide is provided to complete this kit
Ce guide de peintures est fourni pour reproduire le modèle
Gray
Light Gray
Gunship Gray
Olive Green
Insignia Blue
Semi Gloss White
Flat Yellow
Aluminum
Silver
Steel
Gloss Red
Gloss Green
Semi Gloss Black
Flat Black
Medium Gray
Medium Dark Gray
as shown on the box.
réduit qui apparaît sur la boîte.
* DO NOT CEMENT
* NE PAS COLLER
Gris
Gris clair
Gris hélicoptére
Gris vert
Bleu embléme
Blanc satiné
Jaune mat
Aluminium
Argent
Acier
Rouge brillant
Vert brillant
Noir satiné
Blanc mat
Gris moyen
Gris foncé moyen
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85552500200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2008. All rights reserved.
Page 2
1
COCKPIT ASSEMBLY
122
FRONT
INSTRUMENT
PANEL
SEMI GLOSS
BLACK
11
COCKPIT
SEMI GLOSS
BLACK
15
RIGHT
SEAT SIDE
GRAY
GREEN
GRAY
123
REAR
INSTRUMENT PANEL
SEMI GLOSS BLACK
GRAY
GREEN
CONTROL STICK
SEMI GLOSS
GRAY
17
EJECTION
SEAT
HANDLE
19
REAR
BLACK
1
FUSELAGE
TOP
14
SEAT
DARK GRAY
PILOT ARM
66
PILOT
18
FRONT
CONTROL STICK
SEMI GLOSS
BLACK
16LEFT
SEAT SIDE
GRAY
65
COLOR NOTE:
WHITE: HELMETS
OLIVE GREEN: SUIT, LIFE VEST,
AND PARACHUTE STRAPS
SILVER: BUCKLES ON STRAPS
DARK GRAY: MASK AND HOSE
BLACK: BOOTS
Kit 5525 - Page 2
Page 3
2
FUSELAGE SIDE / WING ASSEMBLY
ALUMINUM
HOLES FOR
FUEL TANKS
COMPRESSOR BLADES
23
STEEL
DECAL
44L
FUSELAGE BOTTOM
7
RIGHT
WING TOP
21
LEFT
FUSELAGE SIDE
2
8
LEFT
WING TOP
JET INTAKE
DANGER
DECAL
44R
FUSELAGE SIDE
HOLES FOR
FUEL TANKS
20
RIGHT
9
RIGHT
WING BOTTOM
F U S E L A G E
TOGETHER
10
LEFT
WING BOTTOM
ALUMINUM
2
FUSELAGE
BOTTOM
VIEW WITH WINGS IN PLACE
NOTE:
IF YOU DECIDE TO USE THE
PART #26 LADDER IN STEP (18)
THEN CAREFULLY CUT OUT THE
SHADED SECTION IN THIS STEP.
Kit 5525 - Page 3
Page 4
3
GEAR DOOR / POD ASSEMBLY
127
LEFT
NOSE GEAR
DOOR BOX
STEEL
NOSE GEAR WELL
SEMI GLOSS WHITE
126
LEFT
NOSE GEAR
DOOR BLISTER
4
28
LEFT
34
NOSE GEAR
ACTUATOR
SEMI GLOSS WHITE
ALUMINUM
27
RIGHT
NOSE GEAR WELL
SEMI GLOSS WHITE
TCS with ALQ - 100 ANTENNA
125
RIGHT
HALF CHIN POD
LIGHT GRAY
124
LEFT
HALF CHIN POD
LIGHT GRAY
GUN PANEL / EXHAUST ASSEMBLY
22
RADOME
71
ANGLE OF
ATTACK PROBE
STEEL
25
GUN PANEL
AFTERBURNER
102
EXHAUST NOZZLE
WITH SLOT
STEEL
ARRESTING HOOK
3
SEMI GLOSS WHITE
ALUMINUM
103
STEEL
101
EXHAUST
NOZZLE
STEEL
Kit 5525 - Page 4
Page 5
“D”
5
VERTICAL TAIL
6
FAIRING
5
LEFT
VERTICAL TAIL
6
VERTICAL TAIL
FAIRING
TAIL ASSEMBLY
4
RIGHT
VERTICAL TAIL
REAR VIEW OF FINS
6
120
MAIN WHEEL
FRONT
FLAT BLACK
SEMI GLOSS WHITE
DARK GRAY
DARK GRAY
LEFT MAIN WHEEL ASSEMBLY
63
LEFT
121
MAIN WHEEL
BACK
FLAT BLACK
52
LEFT
MAIN GEAR STRUT
INNER HALF
SEMI GLOSS WHITE
MAIN GEAR STRUT
OUTER HALF
SEMI GLOSS WHITE
SILVER
Kit 5525 - Page 5
Page 6
6
61
LEFT
MAIN GEAR
DOOR
LEFT WHEEL ASSEMBLY CONTINUED
53
MAIN GEAR
RETRACTION
STRUT
SEMI GLOSS
WHITE
57
LEFT
MAIN GEAR
INNER DOOR
LEFT
MAIN GEAR
OUTER DOOR
7
SEMI GLOSS WHITE
128
LARGE ECM
BLISTER
129
SMALL ECM
59
BLISTER
RIGHT MAIN WHEEL ASSEMBLY
SILVER
120
MAIN WHEEL
FRONT
FLAT BLACK
51
RIGHT
MAIN GEAR STRUT
INNER HALF
SEMI GLOSS WHITE
Kit 5525 - Page 6
62
RIGHT
MAIN GEAR STRUT
OUTER HALF
SEMI GLOSS WHITE
121
MAIN WHEEL
BACK
FLAT BLACK
SEMI GLOSS
WHITE
Page 7
7
RIGhT whEEl ASSEMBlY CONTINUED
53
MAIN GEAR
RETRACTION
STRUT
SEMI GLOSS
WHITE
60
RIGHT
MAIN GEAR
DOOR
SEMI GLOSS WHITE
128
LARGE ECM
BLISTER
56
RIGHT
MAIN GEAR
INNER DOOR
8
SEMI GLOSS
WHITE
32
LEFT
NOSE GEAR
LINK
SEMI GLOSS
WHITE
SMALL ECM
NOSE whEEl ASSEMBlY
36
NOSE WHEELS
FLAT BLACK
NOSE GEAR STRUT
(SHADED PART ALUMINUM)
33
SEMI GLOSS WHITE
129
BLISTER
31
RIGHT
NOSE GEAR
LINK
SEMI GLOSS-
WHITE
69
NOSE GEAR
LIGHT
CLEAR
30
BRAKE
CYLINDER
SEMI GLOSS
WHITE
58
RIGHT
MAIN GEAR
OUTER DOOR
Kit 5525 - Page 7
Page 8
9
BOMB ASSEMBLY
147
LEFT
AN/ALQ-167
LANTRIN POD
144
TOP
MK-82
500-POUND BOMB
MED DARK GRAY
145
BOTTOM
MK-82
500-POUND
BOMB
MED DARK
GRAY
148
RIGHT
AN/ALQ-167
LANTRIN POD
151
BOMB FIN
OLIVE GREEN
GBU-12 LASER GUIDED
500LB. BOMB
MED DARK GRAY
GBU-31 (V2/B) JDAM
2000 LB. BOMB
149
TOP
152
TOP
OLIVE
GREEN
150
BOTTOM
GBU-12 LASER GUIDED
500LB. BOMB
MED DARK GRAY
153
BOTTOM
GBU-31 (V2/B) JDAM
2000 LB. BOMB
151
BOMB FIN
OLIVE GREEN
OLIVE
GREEN
10
141
FIN
MISSILE
STEEL
STEEL
140
AIM 9M
SIDEWINDER
LIGHT GRAY
BROWN
43
TOP
AIM-54C
PHOENIX MISSILE
LIGHT GRAY
MISSILE ASSEMBLY
141
MISSILE FIN
YELLOW
STEEL
49
MISSILE FIN
STEEL
STEEL
48
AIM 9M
SIDEWINDER
LIGHT GRAY
YELLOW
PHOENIX MISSILE
SEMI GLOSS
WHITE
73
BOTTOM
AIM-54C
LIGHT GRAY
49
MISSILE FIN
STEEL
Kit 5525 - Page 8
BROWN
YELLOW
SEMI GLOSS
WHITE
Page 9
11
PYLon / FUeL tanK assembLY
WEAPONS
PYLON
PHOENIX
12
135
LEFT
159
RIGHT
PYLON
137
LEFT
WEAPONS
PYLON
136
RIGHT
WEAPONS
PYLON
158
LEFT
PHOENIX
PYLON
131
BOTTOM
FUEL TANK
version 1 armament
138
RIGHT
WEAPONS
PYLON
130
TOP
FUEL TANK
146
AIM-7M
SPARROW MISSILES
Kit 5525 - Page 9
Page 10
13
AIM-54C
PHOENIX MISSILE
version 2 armament
LASER GUIDED
BOMBS
44
RIGHT
LANTIRN POD
WITH ADAPTER
FUEL TANK
LASER GUIDED
BOMBS
45
LEFT
WEAPONS RAIL
142
BRU-32 WITH
ADU-703 BOMB
PYLONS
BRU-32 WITH
ADU-703 BOMB
PYLONS
142
WEAPONS RAIL
PHOENIX
PYLON
LEFT
WEAPONS
PYLON
132
LEFT
FUEL TANK
RACK
FUEL TANK
133
RIGHT
FUEL TANK
RACK
RIGHT
WEAPONS
PYLON
Kit 5525 - Page 10
Page 11
14
142
BRU-32 WITH
ADU-703 BOMB
PYLON
LEFT
WEAPONS RAIL
version 3 armament
GBU-31 (V2/B) JDAM
2000 LB. BOMB
GBU-31 (V2/B) JDAM
2000 LB. BOMB
142
BRU-32 WITH
ADU-703 BOMB
45
PYLON
44
RIGHT
WEAPONS RAIL
PHOENIX
PYLON
LEFT
WEAPONS
PYLON
AIM-54C
PHOENIX MISSILE
FUEL TANK
132
FUEL TANK
RACK
FUEL TANK
133
FUEL
TANK RACK
LANTIRN POD
WITH ADAPTER
RIGHT
WEAPONS
PYLON
Kit 5525 - Page 11
Page 12
15
version 4 armament
MK-82
500-POUND
BOMBS
48
AIM 9M
SIDEWINDER
MISSILE
142
BRU-32 WITH
ADU-703 BOMB
PYLONS
45
LEFT
WEAPONS RAIL
MK-82
500-POUND
BOMBS
142
BRU-32 WITH
ADU-703 BOMB
PYLONS
RIGHT
WEAPONS RAIL
48
AIM 9M
SIDEWINDER
MISSILE
SIDEWINDER
LAUNCH RAIL
44
50
140
AIM 9M
SIDEWINDER
MISSILE
50
SIDEWINDER
LAUNCH RAIL
139
RAIL ADAPTER
140
AIM 9M
SIDEWINDER
MISSILE
SIDEWINDER LAUNCH
134
RAIL WITH CHAFF
DISPENSER
LEFT
WEAPONS
PYLON
FUEL TANK
132
FUEL
TANK
RACK
139
RAIL
ADAPTER
FUEL TANK
133
FUEL
TANK
RACK
RIGHT
WEAPONS
PYLON
SIDEWINDER LAUNCH
134
RAIL WITH CHAFF
DISPENSER
Kit 5525 - Page 12
Page 13
16
CANOPY ASSEMBLY
PAINT NOTE:
FRAME ON CANOPY AND
WINDSHIELD
MATCH TO AIRCRAFT
COLORS
WINDSCREEN
HEADS UP DISPLAY
67
165
(HUD)
CLEAR
68
CANOPY
24
CANOPY DECK
DARK GRAY
DARK GRAY
CLOSED
0PEN
Kit 5525 - Page 13
Page 14
17
FRONT assembly
40
TOTAL
TEMPERATURE
PROBE
37
ANGLE OF
ATTACK PROBE
(AIC)
18
38
PITOT STATIC
PRESSURE PROBE
laDDeR assembly
STARBOARD SIDE
PORT SIDE
39
ANGLE OF ATTACK
SIDE PROBE
37
ANGLE OF
ATTACK PROBE
(AIC)
38
PITOT STATIC
PRESSURE PROBE
19
161
ARM
162
FIGURE
163
BACK
LADDER
DARK GRAY
FIGURes assembly
COMPLETED
FIGURE
FIGURE A
COLOR NOTE:
WHITE: HELMETS
OLIVE GREEN: SUIT, LIFE VEST,
AND PARACHUTE STRAPS
SILVER: BUCKLES ON STRAPS
DARK GRAY: MASK AND HOSE
BLACK: BOOTS
FIGURE B
160
FIGURE
164
BACK
26
COMPLETED
FIGURE
Kit 5525 - Page 14
Page 15
20
decal placement
Kit 5525 - Page 15
Page 16
21
decal placement
Kit 5525 - Page 16
Loading...